After updating my Satellite A200 does not start

Similar Questions

• Re: Satellite A200 does not start

  I have a Toshiba Satellite A200 on VISTA.
  The laptop does not start. I can get to the Toshiba splash screen, but don't go no more far just get the blocking of the laptop and the display one? symbol at the top right of the screen.

  I tried

  -Reset to the factory settings (no difference)
  -Starting with the battery and output (no difference)
  -Withdrawal of the memory modules and try different configurations (no difference)
  -Remove the hard drive (screen displays the details of Intel and say no HD media detected no screen Toshiba either)
  -Pressing the button to try to get in windows safe mode (can t happen).

  Title information, under settings, I see the hard drive and DVD player is connected is connected.

  If anyone has any ideas, please let me know.

  Thanks in advance

  Hi mate

  It seems that you have already tried all possible solution proposals
  But what happens if you start the laptop using a bootable diskette. for example, recovery disk, disk Win XP, Linux live CD, etc?

  I knew it could be a HARD drive problem, even if the HARD drive is correctly detected by the BIOS
  Maybe a replacement HARD drive might help maybe.

  Otherwise, it could be a serious hardware problem I m thinking: motherboard

  What do you think?

• My Satellite A200 does not start

  Hello

  my name is Phil, my Toshoba Satellitw A200 will not start. I just get a black screen, I tried starting with a/c unit only, with & without a/c power. I tried several times without success.
  I am running Vista Home Premium & have all the obvious anti-virus/malware proection.
  Can someone please help. I was told that the hard drive may need re-allocation of places, how do you do that?

  Thank you.
  Kind regards.

  Stand by.
  If I understand you right, you can start your laptop but the screen remains black. Can you confirm this?

  Or simply nothing happens. What happen exactly when you press the power button / stop?

• Satellite A100-920 - after updating the BIOS, it does not start

  Hi all

  I've updated the BIOS of my laptop to V6.0 (excerpt from the Toshiba site) then Windows XP and it went well, then Setup wanted to restart the PC.
  But restarts, he won't have in the startup process. I can not access the start menu, or anything else by clicking F2 or F12. But could go the detailed process by clicking on escape. And there I see the following messages:
  
  Phoenix TrustedCore (TM)
  V6.0
  Version.Mak - r1.53
  detects the dual core [email protected]

  No TPM or TPM has problem.
  1023 M system RAM passed
  

  And that's all.
  I can not get older versions of BIOS, and I couldn't find the version of the version 6.0 update that I could put on a CD for an another BIOS update.

  Anyone has an idea on what is wrong? And if you find that it's to do with version 6.0 and I need a previous version, please could you send me the installation files that are necessary to do the update via a CDROM.

  Thanks for your help.

  It is unclear to me that you can do the BIOS update using CDROM. The BIOS updates are designed to be done under operating systems. Old traditional updates have been a little different.

  In any case, it seems that the BIOS chip is damaged. I can imagine this downgrade can help but where to find the old version. I know you can get it from the authorized service provider. they have access to the database of Toshiba and they can download the old version of the BIOS.

  The download page is just the latest version available.
  Contact the nearest service and ask for help.

• Satellite A200 does not start

  Hello

  overall, I was very happy with my A200, 5 months old now.
  But last month, strange behavior.

  Closed always perfect Vista.

  Next day, want to start my PC.
  _On-button makes nothing_, even if the battery is 100% ok.
  -> SOLUTION is to remove the battery, insert again and then you, the laptop starts...

  Another question:
  Button of the laptop, but _screen is Osama.
  -> The same solution, remove the battery and try again.

  Is - is this known? Solution?

  THX
  Dave

  Hello

  I noticed a similar problem on my old laptop several months ago.
  I've updated the BIOS, and since everything works ok.

  Check it out dude!

• Satellite A200 - does not start, no display

  Hello

  When I turn the power on the Panel before right lights are on and I can hear the fan and something about loading, but then I get two beeps sounds and nothing ever shows up. No BIOS, no start menu, no Toshiba splash, nothing. I read in the media FAQ comments holding backspace or take out the battery, but it did not help.

  I've had it for 3 years now and use it quite often, I guess that the motherboard has finally just blame but I want to be more secure. If I have to redress might it be a way I could back up the data on it?

  Thanks in advance.

  Hi asoberirishman

  If you have already checked the FAQ from Toshiba and followed the instructions, is there nothing more that you can do. What you can do must connect an external monitor to your laptop, maybe what he s only on the malfunctioning of the internal display.

  But more often in such a case there s a motherboard or CPU issue. You should ask a technician for laptop aid or with other words to check the hardware. Guys have access to all the tools of diagnosis of Toshiba.

  Good luck! :)

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• After restart of the cc does not start

  Hello

  on iMac27 with OS X Yosemite. After each restart creative cloud does not start. I must force "reboot several times for throwing.

  Any suggestions?

  Thank you

  Enrico

  Hi Enrico,.

  Please try the below steps mentioned and see if it works.

  1. open Activity Monitor

  2 search for Adobe related process (Creative cloud, coresync, AAMnotifire/updater)

  3 - put an end to all Services from Adobe

  4 restart the computer, try to run.

  Cleaning tool allows you to delete the corrupted files creative cloud and reinstall it.

  • Removal tool: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  • Installer: creative cloud help | Download, install, update or uninstall applications

  If you still find the same behavior, please try to create a new admin account and try to run to this user account.

  Thank you

  Atul Saini

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite C650 does not start with android phone on

  Hello

  I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

  Thank you very much
  Ian

  Cool. Thanks for the comments.

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Satellite A205-S5804 - after installing Microsoft sync, it does not start

  Hello

  This model uses by me. I downloaded it from Vista to XP.

  After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.

  Any help please?
  BR

  Hello

  > After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
  And it does n average boot t?
  You get an error message? The laptop freezes on start up? Do you get a BSOD?

  I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?

  In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
  :(

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them