After using Vista for a while, I installed Windows 7. Can I remove completely all files in "Windows.old".
After using Vista for a while, I have now installed Windows 7. I can now delete the folder "Windows.old".
Please see the advice and the method here:
How can I remove the Windows.old folder?
Tags: Windows
Similar Questions
-
anyone with any suggestions why this is so... I change my hardware, and I got service pack 2 installed.
Is vista home edition.
Hi oumzin
1. have you modes sleep or hibernation, working on the computer?
2. during how long have you had this problem?
3. what changes did you do before the show?
4. do you have the question start after the installation of service pack 2?Method 1:
You can check if the problem happens again in safe mode. In safe mode; you have access to only the drivers and base files.
Check out the link to start the computer in safe mode and then check-
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
If you are not faced with the question in safe mode, then you can check in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
-
A gray transparent screen covers my open window Facebook keeps me to post, but I can still scroll vertically. Reload the page solves the problem for a few minutes before repeating the procedure. Problem with the Facebook Page right now.
Hi Hannesdp,
Thank you for your question. Right now, your question was refitted to the Helpdesk and to examine the issue, I will need a little more troubleshooting information.
First please try to access the page in a private window, and then try to reproduce the problem in Mode safe, if it is not reproducible in Mode without failure, then one of the extension or pug-ins can affect scripts on this page.
"Try Mode without failure of Firefox to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
- Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
A screenshot of the problem and a screenshot of console js may also be necessary if the problem persists in a private window. These are the two reference tools that I can clarify as well.
[Tool console]
[Record]And if other contributors have other ideas of troubleshooting or input please do not hesitate. We are all happy to help!
-
Error 80070641 and 641 of the Code using Vista 64-bit code - cannot install Windows updates
Dell Studio 540
Intel Core 2 Quad CPU [email protected]
8.00 GB OF RAM
Windows Vista Edition Home Premium SP2
64-bit operating systemI get the same codes that everybody, and I tried so many solutions posted that I'm really frustrated now. Once solutions expected to run msiexec/unreg and Windows could not find the file, so maybe that's the problem? I'm at my wits end here... I want to upgrade to Windows 7, but I fear that this problem prevents a successful upgrade. Please help me!
Darlene
Hello Darlene,
Download and SAVE to your system the following files from registry-fix 2
http://download.bleepingcomputer.com/win-services/Vista/msiserver.reghttp://download.bleepingcomputer.com/win-services/Vista/wuauserv.reg
For each of them, do a right click on it and select MERGE
Allow everyone to merge into registry.
Once it is finished, logoff and reboot for a new beginning.Try new Windows Update & inform of the result.
-
Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...
I tried to work offline at home after working online for a while. The sign came and wrote
«No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»
However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.
"The network is not connected TRYagain.
It was the only option, does not allow me to continue offline...
You have an idea why I couldn't?
An Internet connection is required the first time you install and your creative Cloud of license applications.
You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions
-
After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).
Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.
I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.
Concerning
B Odd Andersen
Hi B Odd Andersen,
I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.
Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.
Method 2: Change the power to another and check to see if the problem persists
Change, create, or delete a power plan (scheme)Method 3: check the logs in event viewer for more information on auto-off down
What are the information in event logs? (Event Viewer)
Note: For your safety and security, it is not recommended to disable Windows Update.
Activate the update or disable automaticThanks and greetings
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
After the crash of my computer, I installed Windows Genuien Advantage Kit for Windows. But there is no WORD/EXCEL/PPT. I can now install OFFICE HOME & STUDENT 2007 WITHOUT LOSS of BENEFIT of WINDOWS VISTA?
Vista is an operating system, and social is a value of Applications.
Validation of each is a separate process.
Install a legitimate programs in the Office Suite.
See you soon.
Mick Murphy - Microsoft partner
-
This computer was given to me by my kids. I had with Windows Vista already installed. I also want to install Windows XP to my Quick Books program. Vista will not let me install XP. Can you help me?
Hello
You don't say how you are trying to install XP and if the manufacturer of your computer has XP drivers available for this purpose to activate XP to be installed and run successfully on this subject.
You will need to go to their website where there should be a section to see if they have XP drivers for your model computer.
If they have XP drivers available for it, follow the instructions in these links provided in its response to dual boot Vista and XP:
http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm
http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html
I prefer the Instructions in the second link.
Here's another consideration on the use of the XP Compatibility Mode in Vista for QuickBooks, but as I don't use QuickBooks, you will need to request support QuickBooks if it would work in this way.
"Using Windows 7 or Vista Compatibility Mode.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
"Make older programs run in this version of Windows".
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
See you soon.
-
So do not use computer for a while, it locks and requires the initial password to get back in. When it becomes available, we've been thrown off internet, or another program we are.
I don't know why Mr. Murphy suggested a system restore. Maybe he interpreted your post differently I did. You have your screen standby/power options defined on too short a time. You can also disable the requirement for a password during the recovery.
Right-click on an empty area of the desktop and click on personalize. To customize the applet opens. Click the screen saver. Change the timeout to something reasonable like 10 or 20 minutes. You will see where you can clear the check box next to the "password required on curriculum vitae... ».
Now do the same in the (Control Panel) Power Options applet. This link contains pictures showing you how to disable this option:
MS - MVP - Elephant Boy computers - don't panic!
-
I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!
Activation for CS is closed. Adobe provides you with a free replacement of CS2.
Uninstall CS
Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products
Click English, download Photoshop CS2 and also copy the serial number that comes with it.
Install CS2 and use this serial number CS2. There no need activation.
Take your copy of the CS, it is no longer usable.
-
Should I reinstall everything to use a computer for a paid subscription after using it for a trial under a different account? Programs say "start trial" or 'trial ended' or 'buy' next to them even after I signed with my membership and then download them.
Hello Marcella.
You don't have to re - install your applications. Just activate your creative license cloud by the signature of the creative application of cloud and then reconnect.
Please see the help for the following document:
Sign out, sign in | Creative cloud desktop application
Kind regards
Sheena
-
My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?
original title: Windows XP installationHi Ribhu,
How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?
You can try a new installation of Windows XP after formatting the hard drive Vista and check.
You can consult the following wire link and check if it helps.
How can I replace Vista with XP?
Note: The above mentioned thread contains third party links.
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Also check out the link:
-
I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.
original title: Code 0x800704C8...Hello
Did you change your computer?
Method 1:
Step 1:
I suggest you follow the link and check.
What are the permissions?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
Step 2;
Why can't I delete a file or a folder?
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
-
can someone help me while I install windows 7 I got massage that windows did not read my DVD my lap top hp probook 4540 i5 s any help pls
Hi, Ahmed.
Have you tried using a different DVD?
I would also create a USB support and then try to install.
Take a look at this-
http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool
To let us know.
-
I had to redo my computer why can't use my product key when I installed windows, the first time
How to solve the error codes on Windows 7 0xC004C008 Activation of Volume
http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
Maybe you are looking for
-
Where can I find OS 10.9 and 10.10 download?
I have a MacBook Pro (Core i7, 4 GB RAM) running OS 10.6.8 in order to use older versions of Photoshop and Filemaker Pro. I don't have anymore of these on this laptop and upgrade to the Mavericks or Yosemite, while still using Aperture 3. El Capitan
-
How to fix stuck battery and automatic when restart updated ios 9.3.3
How to fix stuck battery and automatic when restart updated ios 9.3.3
-
I need to increase the memory available to an application from command line (DOS window)
At the cmd prompt, I perform the mem command and get the following. I have 3gig of ram but the mem says I have 0 contiguous extended memory available? Is there a way to access this memeory? memory 655360 bytes total conventional655360 bytes available
-
Cannot download Adobe flash player for vista 64-bit
I have problem, I ca not download adobe flash player for vista 64-bit
-
I can't access my user account even if the password is correct.
I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.