After Windows 7 SP1, no drivers found

Similar Questions

• HP help and support after Windows 7 SP1 update

  HP DV7-3079wm notebook running Windows 7 home Premium

  When I arrived to start and help, we help HP & support.  After that update Windows 7 SP1 has been installed the HP help & support is not there.  Is Windows help there in its place.  Does anyone have ideas how I can ger the back version of HP?

  Thanks to 200 tons

  200ton wrote:

  HP DV7-3079wm notebook running Windows 7 home Premium

  When I arrived to start and help, we help HP & support.  After that update Windows 7 SP1 has been installed the HP help & support is not there.  Is Windows help there in its place.  Does anyone have ideas how I can ger the back version of HP?

  Thanks to 200 tons

  Found the fix.  After trying to simply restore, (no restore points not listed a while ago).  The fix was to reinstall HP Support Assistant of the SW installation folder and restart. Problem solved.

  200 tons

• Windows Search is not working/libraries will open in Windows Explorer after Windows 7 SP1 update

  After execution of Windows 7 SP1 update and restart the computer, Windows Search is no longer works and the libraries of the desktop icon does not open Windows Explorer.

  Note, I can open the Windows Explorer (WIN + E) and go to %AppData%\Microsoft\Windows\Libraries without any problem.

  Is there any solution for this?

  Hello

  1. what happens when you try to open libraries by using the desktop icon?

  2. do you get an error message?

  Method 1:

  Follow the link below and check if the problem persists in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  Follow the link below and open the troubleshooter of search and indexing and check if it helps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 3:

  Follow the link below and run the fix - it tool and check if it helps.

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 4: Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Let us know if it helps.

• USB keyboard does not work after Windows 7 SP1

  I recently installed SP1 on my computer running Windows 7 Pro.  Everything was fine before SP1, but after installation, the keyboard is constantly up - does not not intermittently.  I noticed that SP1 seems to have updated kbdclass.sys so I wonder if that caused.

  The USB keyboard is inadmissible for up to 30 seconds when you try to connect to my PC locked.  Also, once connected, the USB port sometimes emits a sound like something to be connected or disconnected.  Meanwhile, the keyboard is again irreceivable.

  It's to the point where I think of getting a new computer.  I tried to uninstall the drivers USB, reboot and let the computer to reinstall.  I also ran MalwareBytes and Anti-Rootkit, looking for malware.

  Any ideas would be appreciated.  It has no other USB connected to my machine except the keyboard and mouse.

  Thank you
  Bill

  Hello

  Welcome to the Microsoft Community Forum.

  Thanks for the sharing of information on the issue.

  • Have you tried to use the USB keyboard on a different USB port?
  • What is the brand and model of the keyboard?
  • The problem is specific to the keyboard?

  Please try using a different port and see if it works.

  Also, try to connect the same keypad USB on another computer and check.

  Also I suggest you to try the following method to resolve the same.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  You can also look at the suggestion of Meghmala replied on July 3, 2010 to:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

  Please post if the problem persists, we will be happy to help you further.

  Thank you

• How can I integrate Windows 7 SP1 in a NON - SP1 install.wim

  How can I integrate Windows 7 SP1 in a NON - SP1 install.wim

  I have a little experience with DISM but can't seem to get SP1 inserted into a NON - sp1 install.wim file.

  I did a lot of research, and the greater part of the answer of all seems them to start with a disc of sp1.

  Thanks in advance!

  Hi Jhein,

  Rather than add the SP1 version for .wim files, you can get the latest ISO of Windows 7 SP1 from this link. Instructions for installing Windows 7 SP1 can be found here.

  If you really want to change the install.wim from your original installation media, it would be better to post your query on support of Windows 7 IT Pro TechNet forums .

  We know if you need help.

  Kind regards.

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Satellite L500 - FN + F6/F7 does not work after installing Windows 7 SP1

  After installation of SP1 on Windows 7 64 bit does not work the screen brightness setting! 1.4.1 for Windows 7 64-bit installation Toshiba value added Package not help!

  Need help!

  Hey Buddy,

  > Installation of Toshiba Value Added Package 1.4.1 for Windows 7 64-bit no help!
  You have also all-new version of the Flash Cards Support utility? This tool is also necasary for the FN key function and can be downloaded on the Toshiba page too.

  Check this box!

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Aspire x 3950 - after windows 10 upgrade dvd/cd drivers missing

  After upgrade windows 10 cd/dvd drivers disappeared. Microsoft technicians have worked on this for 4 days could not find the problem. Can't argue with acer because the product is not under warranty. Any suggestions?

  Unfortunately, I don't have a recommendation on how to solve this problem, other than to go back to the previous installation of Windows. You can try to ensure that all Windows updates are installed. If that doesn't fix it, my best suggestion is to roll back. Given that this system was not qualified to upgrade the windows 10, we offer 10 Windows drivers for this product.

  Maybe someone else will have a suggestion on how to make it work you can try.

• dm4t-1100 does not upgraded to windows 7 sp1 because microsoft video drivers KB2498452 newsletter

  dm4t-1100 xb390av does not upgraded to windows 7 sp1 because microsoft video drivers KB2498452 newsletter.

  These amd/intel hybrid drivers will be updated?

  Hello

  Uninstall the current graphic drivers of the system and if you will be asked to restart then please do so.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install this driver and restart the system.

  Try to reinstall SP1.

• No sound after installing Windows 7 SP1 on Dell 15 (1564)

  Hello

  I had to make a clone of my HD that came with the machine almost died - the system did not start as it was too busy to work with bad sectors. The new clone has worked well, except no sound. I reinstalled all the drivers, including the chipset Intel HD Audio and Realtek Audio card drivers, but no go. Even video drivers AMD drivers LAN, card reader drivers, I reinstalled everything but nothing worked. I finally deleted the Windows 7 SP1 installation, and all of a sudden, everything works fine! I reinstalled the version SP1 with a new copy of the Microsoft site and again the sound disappears. When I go to system information, audio devices are no problem. Windows and Dell own troubleshooting finds no problem. The Realtek speakers are set by default (tried deactivating and reactivating, but did not work). The only point where reviews of windows without the audio is generated when I go into the settings of the speakers, select the speakers (only option is stereo) and click Test, the system claims that the sound could not be played. Am I doomed to Windows 7 which can never be updated for SP1?

  Note also that I can't go back to the factory because settings that the cloning process deleted the hidden partition. Also, I never had the drives installation or repair for Windows 7, so that option is out as well.

  What, in the Windows SP1 could cause the noise problem? I realize that since the Audio worked fine before cloning in SP1, the question must be with the architecture of Windows, but why the sound will return when I uninstall SP1?

  Anyone have any new ideas?

  Such problems are common with factory settings which have the pre-installed drivers, as well as pre-installed software.

  Windows 7 Service Pack 1 contains a number of drivers which adequate conflict with the pre-installed drivers. So you reduced the (likely) bad audio and video performance may be bad.

  You can try to uninstall audio and video drivers to uninstall Windows 7 Service Pack 1, then go to uninstall or change a program and remove any audio or video software. Also to uninstall the drivers from Device Manager and then install Windows 7 Service Pack 1, and then the drivers.

  It would probably be better if you just clean installed with media that contains the Service Pack 1 and then install system drivers in the correct order.

  Follow the Windows reinstallation Guide / A clean installation of Windows 7:

  http://philipyip.WordPress.com/Dell-community-forums/

  It will tell you how to download a Windows 7 with Service Pack 1 installation .iso, create a bootable USB, backup product activation and clean install of Windows 7. This should give optimal performance.

• PC is very slow after upgrade to Windows 7 SP1

  Recently, I made an update to my Pc Windows 7 SP1. Before you download this update, my PC ran smooth as butter, but after installing SP1, things hanging out as * and * I mean really bad.

  I booked a Win 10 update. I'm downloading right now. Please help me! My Pc is really laggy now. Need help! Is there anyway to fix this?

  Original title: Please help!

  Hello Anas,

  We are here to help.

  You can follow these steps on this link.

  Keep us posted.

  Kind regards

• After upgrading to Windows 7 SP1, the memory usage is abnormally high

  After updating my laptop for Windows 7 SP1, the amount of memory is abnormally high. Before SP1 idle memory was around 2 GB after updating slowed uses 5.3 MB of my 6.1 MB in total. It is originally the laptop overheating and having problems. There is no virus present analyses of Security Essentials and Spybot doesn't show anything. The Task Manager does not any abnormal process, and no process using an abnormal amount of memory.

  Hi KnitGnosis,

  Have you seen this article?  Looks like it may solve your problem:

  http://support.Microsoft.com/kb/2505348

  I hope this helps!

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• Windows 7 SP1 bits service is not running.

  I got my lenovo T400 a year (bought previously) and the gate opener 200 GB sea was starting to show signs of failure. I decided to replace the drive with an ssd 240 GB Kingston and I did a new install of windows 7 ultimate. and it worked fine for a few days. It downloads all the necessary drivers and updates. then manually install sp1 and ran wusuoffline he get windows to 532 speed windows installation updates. and after windows installed 30 or so other updates. and ran very well for two weeks. I turned it on and I did things and the basics of Microsoft Security said it could not complete its update if windows update service. I started the update of windows, and he had the red shield as one of my friends put it. and I clicked on search for updates. and he said: 'WINDOWS CANNOT CHECK THE UPDATES, because WHAT THE SERVICE IS NOT running. "YOU MAY NEED TO RESTART YOU COMPUTER. I reboot and run the troubleshooting of windows. and it gave me an error 0x8E5E0247, and that did not help. and I reset tool of windows updates. No deletion software distribution. Nope. and ran to the windows https://support.microsoft.com/en-us/kb/2730071 repair firm. and it still didn't work. so I whent in command prompt and I ran and received a system error 5 access denied. (and I would have ran windows 10 but my dose of video driver do not work in the ten windows environment).

  I need help this is way over my head.

  and this laptop is use for school so there is not another option for me up to what a few weeks or more

  If you can, make a backup of your system, or at least your data important (if there is) first.

  1 it seems that you have seen this article, but its worth a try again after the first reboot of your PC - https://support.microsoft.com/en-us/kb/2730071

  In accordance with the above article, if you look in the "services" window, is the "Background Intelligent Transfer Service" listed and running? If his try listed but not running, starting on the left by clicking to select and right click then click on START. It starts then? If it is not in the list, something's up, see below. NOTE: You may be in an ADMINISTRATOR account in order to start or stop a service.

  If his list but still does not start, then try - https://support.microsoft.com/en-us/kb/971058 and then see if you can run it.

  2 BITS if is not listed, then open MSE and see if you can update from the tab [UPDATE] force? If this fails, then go here and download the latest definition files for MSE to your PC and see if you can install manually. If you install them, now run a scan then full to see if it detects malicious software. Finally, download, install, update and run a scan complete with (free) Malwarebytes. Keep it free, no need to start testing. This analysis found a malware?

  If each scan detects and removes malicious software, then repeat the '2730071' and then '971058' above.

  3 if BIT is missing from the list of services, and the above do not restore, then check out http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-10-7-8-xp-vista/

  Number 14.