Disc Association file missing after installing windows 7 SP1,.

Similar Questions

• XZ029UA #ABA: missing after installing windows device driver 7

  Hello

  I installed windows 7 on my HP dv7-4285dx.

  The wireless network connection does not work.

  The following devices under 'Other devices' indicates that the drivers are not installed:

  1 Intel Centrino Advanced-N + WiMAX 6250

  Hardware ID:

  USB\VID_8086 & PID_0187 & REV_0000

  USB\VID_8086 & PID_0187

  2. network controller

  Hardware ID:

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086 & REV_57

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_0089 & CC_028000

  PCI\VEN_8086 & DEV_0089 & CC_0280

  3 PCI Simple Communications Controller

  Hardware ID:

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  4 unknown Device

  Hardware ID:

  USB\VID_138A & PID_0005 & REV_0 < 90

  USB\VID_138A & PID_0005

  4 unknown Device

  Hardware ID:

  ACPI\HPQ0004

  * HPQ0004

  Could you please share links for the above drivers?

  Thank you

  FADD

  Hello

  Please download and install #3 first, then restart. After that, install 1,2,4 and 5.

  1 and 2: article 6 of the following link:
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang= & ProductID = 3199 & ProdId = 3199
  
  3:  Intel Management Engine Interface (MEI) driver
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng & DownloadType = drivers & Keyword = Intel + Management + Engine
  
  4. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us & lc = on & softwareitem = ob-105093-1
  
  5. HP 3D DriveGuard Software:
  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards.

• 4540 proBook s: unknown device missing after installing windows driver 8

  My laptop is a Probook s 4540

  I installed Windows 7 to windows 8.1 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Thank you

  Hello

  Should be HP 3D DriveGuard 5 on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_124200_1&swEnvOid=4158

  Kind regards

  DP - K

• files missing after installing updates

  I updated one of the pc to my work and downloaded updates. After restarting the pc installed updates, about 32. After installing many important issues seemed to lack, including the application of drop box. We have a server to the installation that this PC is connected to. would it be possible that the erasure of files updates, but they are stored on the server?

  Hi Clint,.

  Thank you for your response.

  As I informaned you in the previous answer, I would season you post your question on the TechNet Forums as the issue related to the field.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  I hope this helps.

• Beats Audio Control Panel missing after installing windows 8

  Hello
  I have HP h9 - 1185 at the office and I have recently installed windows 8 on it after removing Windows 7 and HP Beats Audio Control Panel is absent since then. How can I get that back?

  Hello

  Download and install the IDT HD Audio driver from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59424.exe

  When the installation is complete, restart the computer.

  Kind regards

  DP - K

• Satellite Pro 4600 Sound missing after installing Windows 98SE

  I have installed Windows 98SE on my 4600 whose specifications are:
  Model PS460A-04163
  P850 14TX 128M 20 ML DVD

  I have no sound at all and all the sound options are grayed out. I have downloaded a driver from Toshiba (Yamaha AC - XG?), but it wasn't correct. Can someone point me in the right direction for the correct audio driver. I'm also not sure what "series" falls under this model. Thanks for your help. 7.

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=84983

  you will find the link to the page of the Toshiba driver where you can download a driver for this device.

  Good luck

• unknown device missing after installing windows driver 8

  I recently installed windows 8 pro to my pc and installed all the drivers but in my device manager it is now a yellow mark on the unknown device.

  Location- on PCI Express Root Complex

  Details of hardware-

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  Hi TheRaven2099. First try the driver for your computer page and click on the button "Scan now" at the top left.
  
  
  
  HP Pavilion dv7-1240us laptop support:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & LC = in & Product = 3860622
  
  
  
  
  
  If that does not detect it, this reference may be for that.
  
  HP ProtectSmart hard drive protection:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & softwareitem = ob-109953-1
  
  
  
  Let me know.

• Windows 7 hangs after installing Windows 7 SP1 update

  Title of the Moose: Service Pack 1 Windows 7

  I loaded (KB976932) down.  Nothing but headaches.  Computer kept crashing.  has finally got the computer restored to the 22 but it still crashes.  How is it?  Nenah

  Hello

  ·         You receive an error message when the system crashes?

  ·         The system hangs at random or specific events?

  ·         Service pack 1 for Windows 7 installed successfully on the system?

  I suggest you to check the Windows Update history and check if updates have been installed successfully or not. Check out the link provided below for more information on checking update history.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Windows 7 Service pack and other updates to Windows are released to improve the performance, reliability and security of the system, there could be several reasons why you experience performance problems on your computer.

  Try the following steps:

  Method 1:

  Run the troubleshooter of performance and then check

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• No sound after installing Windows 7 SP1 on Dell 15 (1564)

  Hello

  I had to make a clone of my HD that came with the machine almost died - the system did not start as it was too busy to work with bad sectors. The new clone has worked well, except no sound. I reinstalled all the drivers, including the chipset Intel HD Audio and Realtek Audio card drivers, but no go. Even video drivers AMD drivers LAN, card reader drivers, I reinstalled everything but nothing worked. I finally deleted the Windows 7 SP1 installation, and all of a sudden, everything works fine! I reinstalled the version SP1 with a new copy of the Microsoft site and again the sound disappears. When I go to system information, audio devices are no problem. Windows and Dell own troubleshooting finds no problem. The Realtek speakers are set by default (tried deactivating and reactivating, but did not work). The only point where reviews of windows without the audio is generated when I go into the settings of the speakers, select the speakers (only option is stereo) and click Test, the system claims that the sound could not be played. Am I doomed to Windows 7 which can never be updated for SP1?

  Note also that I can't go back to the factory because settings that the cloning process deleted the hidden partition. Also, I never had the drives installation or repair for Windows 7, so that option is out as well.

  What, in the Windows SP1 could cause the noise problem? I realize that since the Audio worked fine before cloning in SP1, the question must be with the architecture of Windows, but why the sound will return when I uninstall SP1?

  Anyone have any new ideas?

  Such problems are common with factory settings which have the pre-installed drivers, as well as pre-installed software.

  Windows 7 Service Pack 1 contains a number of drivers which adequate conflict with the pre-installed drivers. So you reduced the (likely) bad audio and video performance may be bad.

  You can try to uninstall audio and video drivers to uninstall Windows 7 Service Pack 1, then go to uninstall or change a program and remove any audio or video software. Also to uninstall the drivers from Device Manager and then install Windows 7 Service Pack 1, and then the drivers.

  It would probably be better if you just clean installed with media that contains the Service Pack 1 and then install system drivers in the correct order.

  Follow the Windows reinstallation Guide / A clean installation of Windows 7:

  http://philipyip.WordPress.com/Dell-community-forums/

  It will tell you how to download a Windows 7 with Service Pack 1 installation .iso, create a bootable USB, backup product activation and clean install of Windows 7. This should give optimal performance.

• Software of HP missing after installing Windows 7

  I have a HP Pavilion dv7-1245dx which had Vista 64 bit OS installed.  When I upgraded to Windows 7 64 bit OS I ended up having to do a clean installation of the operating system due to errors during the upgrade process.  Now it works correctly but I have no HP software other than the one displayed for Windows 7, I downloaded.  How can I get other software?  When I boot from the recovery cd or partition of disk option is to recover the original operating system I don't want to do.  How can I get the software because I don't have the HP recovery software more on my c drive?

  Thanks, I have now received all these.  The only thing that miss me is the HP Recovery Manager, where can I get it?

• Beats audio software missing after installing windows 8.1

  Hi all!

  I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

  Kind regards

  DP - K

• 4540 proBook s: missing after installing windows 7 Pro unknown device driver

  I have problems with driver for both devices. I don't know where to find the drivers for these two devices.

  USB controller:

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17F6103C & REV_04

  Unknown device:

  ACPI\HPQ6000

  * HPQ6000

  Please help me find the drivers.

  Thank you!

  Hello:

  You need these drivers...

  PCI\VEN_8086 & DEV_1E31:

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  ACPI\HPQ6000:

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

• Satellite L500 - FN + F6/F7 does not work after installing Windows 7 SP1

  After installation of SP1 on Windows 7 64 bit does not work the screen brightness setting! 1.4.1 for Windows 7 64-bit installation Toshiba value added Package not help!

  Need help!

  Hey Buddy,

  > Installation of Toshiba Value Added Package 1.4.1 for Windows 7 64-bit no help!
  You have also all-new version of the Flash Cards Support utility? This tool is also necasary for the FN key function and can be downloaded on the Toshiba page too.

  Check this box!

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =