Windows 7 SP1 bits service is not running.
I got my lenovo T400 a year (bought previously) and the gate opener 200 GB sea was starting to show signs of failure. I decided to replace the drive with an ssd 240 GB Kingston and I did a new install of windows 7 ultimate. and it worked fine for a few days. It downloads all the necessary drivers and updates. then manually install sp1 and ran wusuoffline he get windows to 532 speed windows installation updates. and after windows installed 30 or so other updates. and ran very well for two weeks. I turned it on and I did things and the basics of Microsoft Security said it could not complete its update if windows update service. I started the update of windows, and he had the red shield as one of my friends put it. and I clicked on search for updates. and he said: 'WINDOWS CANNOT CHECK THE UPDATES, because WHAT THE SERVICE IS NOT running. "YOU MAY NEED TO RESTART YOU COMPUTER. I reboot and run the troubleshooting of windows. and it gave me an error 0x8E5E0247, and that did not help. and I reset tool of windows updates. No deletion software distribution. Nope. and ran to the windows https://support.microsoft.com/en-us/kb/2730071 repair firm. and it still didn't work. so I whent in command prompt and I ran
I need help this is way over my head. and this laptop is use for school so there is not another option for me up to what a few weeks or more If you can, make a backup of your system, or at least your data important (if there is) first. 1 it seems that you have seen this article, but its worth a try again after the first reboot of your PC - https://support.microsoft.com/en-us/kb/2730071 In accordance with the above article, if you look in the "services" window, is the "Background Intelligent Transfer Service" listed and running? If his try listed but not running, starting on the left by clicking to select and right click then click on START. It starts then? If it is not in the list, something's up, see below. NOTE: You may be in an ADMINISTRATOR account in order to start or stop a service. If his list but still does not start, then try - https://support.microsoft.com/en-us/kb/971058 and then see if you can run it. 2 BITS if is not listed, then open MSE and see if you can update from the tab [UPDATE] force? If this fails, then go here and download the latest definition files for MSE to your PC and see if you can install manually. If you install them, now run a scan then full to see if it detects malicious software. Finally, download, install, update and run a scan complete with (free) Malwarebytes. Keep it free, no need to start testing. This analysis found a malware? If each scan detects and removes malicious software, then repeat the '2730071' and then '971058' above. 3 if BIT is missing from the list of services, and the above do not restore, then check out http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-10-7-8-xp-vista/ Number 14. Tags: Windows Explorer 8 I have Nortorn 360 installed and running. Windows Vista 64-bit So far the service is not running. I tried to restart, Fix. I deleted the update log I saw another thread, the fix o. Hello I was informed by Norton that the windows base filtering engine service is not running on our laptop. And I need to notifify you. The filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications. Firewall Windows depends on BFE works correctly. To find out if BFE is running on your system, click Start, and then type this command: cmd /k sc qc bfe Press {ENTER} If you receive the following error: [SC] OpenService FAILED 1060: The specified service does not exist as an installed service. It is generally the work of one or more malicious software. See this address for the explanation and information on how to restore the missing service: The motor filter (BFE) basic service is missing: why it is happening and how to restore: or you can download and apply the patch from BFE (#11) of this page service registry: Register various fixes for Windows 7/XP/Vista - the Winhelponline Blog: Windows Media Center Scheduler service is not running, even when the value of autostart I had some trouble recently getting Windows Media Center to record programs. I did some research and found that Windows Media Center (ehSched) Scheduler Service does not start when I start my computer. I am running Windows 7 32 bit SP1 on a laptop of Toshiba Satellite A500. Help, please! Hi the Flomsat, I tried all the solutions on this thread. None was able to solve my problem. However, I found a fix that MAY have worked (it's only 1 day but so far it looks promising). Open Windows Media Center, Click on settings-> General-> optimization-> uncheck to "perform an optimization. I never noticed an increase in performance and reliability with it turns out, in fact, now that I think about it, when I turned it on, my Scheduler service started having these problems. It must be able to close the Scheduler to 'optimize '... UPDATE *. I had to reinstall windows to get it working again :( Windows 7 - the Audio Service is not running How to operate? How to operate? 1. click the Start button, type services.msc in the search bar and press the Enter key. 2. in the right pane, check if the Windows Audio service is started. 3. otherwise, please, double-click the service. In the 'Général' tab, make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Service status" to start this service. Windows Vista SP2 from worm 6.0.6002 Build 6002. KB2675157 Explorer 9.0.8112. Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall). My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running. I ran last update of Windows in April and he was properly executed. I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started. I am able to run updates on all the software outside of windows. I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products. I don't have another PC with Vista I can compare the registry entries. Hello Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/ Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058 Method 3 : Try to set up your computer in a clean boot state, and then check to see if the same problem occurs. By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode. Hope this information is useful. When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. » Steps has been involved: 1. I restarted and even restored to the point when the last update was installed. 2. I verified that the service is running and checked that there are no errors in the the event log for this issue. Any ideas? PA bear, I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions: 1 Win 7 Home Premium installation 2 64 - bit OS 3 avast! Full version 4. no other anti-virus/anti-spyware has never been installed 5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software. 6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home. Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site. Windows wireless service is not running on this computer I have a Gateway laptop running 32-bit Vista SP2 I can't connect to wireless networks. One day, I had no problems and the next, I am unable to find all the networks. When I try to connect to a network, I get a message that Windows cannot find any network. When diagnosing why link is clicked I get an error dialog box "Windows Wireless Service is not running on this computer. When the Windows network diagnostics dialogue box I click on 'Start Windows Wireless Service' and then told me that Windows cannot resolve the problem and ask contact me my network administrator or ISP. I tried several fixes of different forums and nothing has worked. I ran the antivirus scans that have not found anything. Y at - it a fix for this problem? Hello I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK. The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service. Operating system is Vista 64 bit. Original title: Windows Update I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK. The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service. Operating system is Vista 64 bit. After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance. Error "Windows cannot check for updates because the service is not running. I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem. Please read this article: http://support.Microsoft.com/kb/2730071/en-us Another suggestion is maybe disable the updates of Windows Reset. Activate the Windows updates. Try again. (Worked for some) Error: Windows Update cannot enabled updates, because the service is not running. Original title: update for windows vista. Windows Update is not enabled updates, because the service is not running. I spent all day trying to update via different methods on different for one without a bit of luck. Can anyone help? Windows Update is not enabled updates, because the service is not running. I spent all day trying to update via different methods on different for one without a bit of luck. Can anyone help? Search for malware: Download, install, execute, update and perform analyses complete system with the two following applications: Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.) Search online with eSet Online Scanner. Delete everything is found. Reset. Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you: Let things run/fix. Reset. Try to update. If it still fails, try the following: Reset your Windows with this FixIt components update: Reset. Try to update. If it still does not work, try this...
* Important * When you do this, the following problems occur: Use this FixIt: Reset. Save components WU: regsvr32 Jscript.dll Reset. Try to update. If it still does not work after that - repeat ONCE more that part... Reset your Windows with this FixIt components update: Reset. Try to update.
Come back and let everyone know how you faired. Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64) I get the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "I rebooted without change. I have Vista 64-bit with installed MSE and it cannot update its virus database. I have also Windows Media Center put up a TV and may not be able to download an updated Guide. Can someone help me please? I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking. I found a few other forums similar to my problem, but I don't know that they are the same as mine. I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem. Thank you! Hello 1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages? 2 did you do changes on the computer before the show? Method 1: Run the update utility See the following site: Problems with installing updates http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates. Method 2: Start services Make sure that the following services are started: a. Windows Update b. Background Intelligent Transfer Service c. Cryptographic Services To do: a. click Start, type services.mscwithout the quotes and press enter. Method 3: Reset the update components See the following site: How to reset the Windows Update components? http://support.microsoft.com/kb/971058. Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry . Method 4: Run the fixit See the following site: The problem with Microsoft Windows Update is not working Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer. I am currently using windows 32 bit vist I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help! Suggestions? Hello 1. have you made changes on the computer before this problem? 2. which antivirus app do you use? I suggest you try these methods and check. Method 1: Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue. Disable the antivirus software Method 2: Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps. Follow these steps: a. click the Start button, click computer. b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log Windows Firewall settings cannot be displayed because the associated service is not running I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings. Can someone help me? I want to restart my windows firewall, which recentloy has stopped working. Hello No one program cannot be used to detect and remove any malware. Added that often easy to detect malware It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe) Download - SAVE - go to where you put it-right on - click RUN AS ADMIN Malwarebytes - free Run the malware removal tool from Microsoft Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN. You should get this tool and its updates via Windows updates - if necessary, you can download it here. Download - SAVE - go to where you put it-right on - click RUN AS ADMIN Microsoft Malicious - 32-bit removal tool Microsoft Malicious removal tool - 64 bit also install Prevx to be sure that it is all gone. Download - SAVE - go to where you put it-right on - click RUN AS ADMIN Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes Choice of PCmag editor - Prevx- Try the demo version of Hitman Pro: Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans, -------------------------------------------------------- If necessary here are some free online scanners to help the http://www.eset.com/onlinescan/ http://OneCare.live.com/site/en-us/default.htm http://www.Kaspersky.com/virusscanner Other tests free online -------------------------------------------------------- Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN Enter this at the command prompt - sfc/scannow How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way. How to run the check disk at startup in Vista
----------------------------------------------------------------------- If we find Rootkits use this thread and other suggestions. (Run UnHackMe) I hope this helps. Rob - bicycle - Mark Twain said it is good. Original title - Vista sp2 64-bit windows program update is not running When I open the program "Windows Update", it has an "X" in a red shield symbol. When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download. However, it never downloads anything, and the rest of the exclaimation mark orange. How can I solve these two issues? I'm guessing that repair will set the other. Hi doubleott You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -. a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow Check the link below for further guidance on scan SFC - mentioned Method 2: You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same. I hope this helps. I can't connect to iTunes Store since I updated ios 10 I can't connect to iTunes Store since I updated ios 10 don't expect to remember passwords Apple Safari remembers each of my passwords frequently used on web pages. I just downloaded and installed version 3.6.3 for Snow Leopard. I transferred all of my favorite Firefox yet some sites do not have to remember. I went to your help page and wa Tecra 9100: Sleep Mode is no longer enabled after closing the lid Hello First post here and not the smartest when it comes to computer skills... Have a Tecra 9100 about 4 years old, under XP Pro SP2. last 3 days whenever I close the lid of the laptop it won't STAND BY mode me leaving no option but to propel to the What is the best configuration of battery for lenovo 420 s I read on the lenovo Web site, you can get up to 9 hours on the thinkpad 420 s and I was wondering if anyone knew the farm configuration to achieve this setting? Up to now I get only up to 3 hours IF I have it on very low performance. I generally kee BOOTMGR is missing__press ctrl + alt + delete to resart I tried to reset to factory setting and something went wrongSimilar Questions
2. you receive an error message?
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
You can try to temporarily disable anti-virus installed on your computer and check.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
You can see the following link.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the following link:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
http://www.hageltech.com/blog/2012/02/07/base-filtering-engine-problems.html
http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/
It IS configured to start automatically.
When I found that the service has not been started, I have manually started, but would find it himself quit again a few minutes later.
It of very frustrating and resulted in missing the scheduled recordings.
The only way to save that program is open the WMC and actually watching the program for the duration of the scheduled recording. (Not good if I'm not home!)
It did NOT work
http://support.Microsoft.com/kb/929135
1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
2. do you have any security software installed on the computer?
3. have you made changes on the computer recently?
We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
1. Click Start, type services.msc and press to enter.
2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
3. on the general tab, change the startup type to automatic and click on the Start button.
4. click on apply, then ok.
Try to connect to the wireless connection and check the result.
If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.
Kind regards
Syed V
Answers from Microsoft supports the engineer.
How to reset the Windows Update components?
net stop wuauserv
CD %SystemRoot%\System32
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
net start wuauserv
* Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.
STILL no? We have something to try...
How to get the latest version of the Windows Update Agent
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 c:\windows\system32\wuaueng.dll
How to reset the Windows Update components?
b. double-click the service and under Service status click Start, if it is not started.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Where 'C' is the drive of operating system
c. delete the log file, and then restart the computer and check the issue.
is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
you are, of course, that the system is clean.
the Windows when you can.
http://www.Malwarebytes.org/
(Then run MRT as shown above.)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
Method 1:
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.
http://support.Microsoft.com/kb/929833
http://support.Microsoft.com/kb/971058Maybe you are looking for