After winning 10 upgrade battery life cycle is no longer available

Similar Questions

• Satellite S50-B-12Z: battery life cycle Option does not appear in the eco utility

  Hello everyone.

  I am facing a strange problem. The eco utility allows to work ok with win 10 on my S50-B-12Z satellite and I used the eco charging battery I've run mainly my laptop plugged in.

  At some point, I need to do a system restore. I have re-installed the 10 victory and also the latest version of the eco utility downloaded from the Toshiba site. The problem is that when I open the utility eco, the choice of "battery life cycle", where you can select the eco reload or not, seems no more! So I find myself with the battery to 80% connected but does not support.

  I already tried to uninstall and reinstall the utility or install an earlier version of it.

  Is there something I could do in order the choice of "battery life cycle" to reappear or to cancel the State of charge of eco and leave my battery to charge again 100%?

  Thank you

  I have the same problem with my P50 - A satellite. Battery-life cycle does not appear in the new eco Win 10 utility installed. Version is: 3.0.0.0006. Older versions do not work, I tried also.

  More than 80% of maximum load, not 100% .

  I hope someone has a suggestion. To 80% battery life is too short

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Battery life lasts only as long as normal (die much faster) and actually fan of sounds he doesn't usually do?

  I got my MacBook Pro 13 "in October. Normally, the battery life will last all day or most of the day. Yesterday it started making noises of fan that she doesn't normally and then when I turned it on this morning it was 68% battery and after about an hour and a half, it decreased by 16%. He has never done this before.

  A know why this is happening and how / if I can fix it?

  Thank you.

  Hi klsym:

  Try to reset the system management controller (SMC) and see if that helps. Reset the management system (SCM) controller on your Mac - Apple Support

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Bug: after having plugged the faces of photos is no longer available

  I was very disappointed to know that after I moved my catalog with photos somewhere else and then made the reconnection procedure, I had lost faces info. These places are no longer available in photos, and 11 PES request to carry out an "analysis of people." The names of persons are always assigned to photos, but not of faces (if I go to the people and select Faces, I see empty boxes).

  I had a face of a lot of time to manually fix wrongly identified and all what is lost now. Is it possible to prevent/fix that?

  Hi Karia,

  Yes, I was able to reproduce this on mine, please report to us that for us, I'll write it upward. I notice this is the same behavior in previous versions of Photoshop Elements as well.

  I looked to see if there was a way to fix the lost face, marking of work you did, but don't seem to have found a way to get that once the images are displaced and then reconnected.

  The images had not been reconnected in their new location, we could have moved the PSE back images, let him see that the images are still there, then move the images within the PES.

  In the future, as a stream of work recommended to move your files. Rather than dragging them to their new location in windows Explorer, if you want to PSE to keep the tags associated with images, move images/files in the Organizer. In this way the Organizer allows you to monitor and update the location of the image so that they do not have to be disconnected.

  If you select the image or images to feel and file > move... Specify then move it.

  Once the images are moved to this location from within the PES, the tags will remain intact.

  Thanks again for bringing This problem to our attention.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite L855-124 cannot change the brightness of the display after Win 8 upgraded

  Hi all

  I have a problem with my laptop Toshiba Satellite L855 - 124 PSKACE.
  After the upgrade to Windows 8, I can't change the backlight brightness of the screen of the laptop.

  There seems to be an error in the graphics driver.
  When I install the AMD graphics driver of Windows 7 in compatibility, it works again, but bugs on other areas.

  Anyone have any ideas?
  Even after you use the upgrade wizard provided by Toshiba, it does nothing.
  Also the drivers for my laptop are not updated. From 2012.

  I called tech support, they told me that a pilot team is going to be fixing the issue.
  That was 2 months ago.

  Is there anyone from Toshiba which can help me with this please?

  Thank you.

  > When I install the AMD graphics driver of Windows 7 in compatibility, it works again, but bugs on other areas.

  So, it looks like a problem of graphics card driver.
  Have you tried the win 8 64 bit * v8.982.7 * driver Toshiba UE page graphics card?

• Qosmio F60 - no additional touchpad and function Fn after Win 8 upgrade

  I have recently installed Windows 8 on my Qosmio F60 and now I have a few questions, I think it might be related driver but not sure what drivers in particular.

  1. the touchpad still works to move the pointer but sliding along the right edge does not scroll more, I had a look on the Web page of drivers but can not find the driver I need to install to make it work. Also, anyone know if there is a driver Windows 8 so that I can drag the edge to bring up the charms and the tabs?

  2. the FN keys no longer work, so I can't control the brightness or other features along the top row of the keyboard.

  If anyone can help with or the other of these questions would be great.

  Thank you
  Phillip

  Hello

  As you can see that there is no special driver to win 8 BOF series Qosmio F60.
  This isn't win 8 supported.
  However, I think that you should be able to use the upgrade drivers to win 8 published for Qosmio F750.
  Try it.

  Recommend that you install the driver for the touchpad (from Synaptics), the utility of the feature key Toshiba value added package and system of Toshiba driver

• Satellite A500: Multimedia keys do not work after Win 8 upgrade

  Hi everyone, I run Toshiba SATELLITE A500 - 1C0 (PSAR3E-01300WPL) with Windows 8 PRO x 64.

  As I noticed - post factum /:-'Models supported' not supported for Windows 8 drivers of my PC.

  Although, the computer will work perfectly, but I have a little problem with my drivers: the Panel at the top of the keyboard (http://goo.gl/IQVAG) works not only put on mute, volume up/down work, but the ECO button and media buttons are NOT - is there any method to upgrade the drivers so that I can use all the keys?

  I installed TOSHIBA eco utility and it works fine, but the buttons do not respond. I can't find and update the driver/ulitity that is responsible for this issue.

  I also want to ask if there is any chance to get the TOSHIBA for Win.8 drivers for my Satellite A PC series in the future. Y at - it a utility to analyze and automatically update TOSHIBA drivers? (but not Toshiba drivers Update Utility, which does not work in my case - it offers me to downgrade my drivers!)

  I opened the Device Manager and tried to update the drivers manually, but - that's even BIGGER problem then eco Panel etc. - some devices are marked as "unknown devices" and may not be recognized at all.

  Thank you for your help,
  oddajlatarke

  > is there a method to upgrade the drivers so that I can use all the keys?

  Method? Name is no other method as to try some tools to win 8 released for other series of laptop. The multimedia button requires installation of VAP (value package).
  Check and test the VAP to win 8 released to win 8 supported notebook series.

  > I also want to ask if there is any chance to get the TOSHIBA for Win.8 drivers for my Satellite A PC series in the future.
  As you said above; computer laptop isn t Win 8 supported model, so I doubt that you will get all the drivers Win 8 in the future.

• Satellite L840/03R - FN buttons does not work properly after Win 8 upgrade

  I bought a new L840/03R and installed Windows 8 using the Toshiba Upgrade Wizard. There is no error message.

  The function keys do not work with the CTRL and ALT keys So I can't use the shortcuts like ALT-F4 to close windows - which gives "second screen" options. It does this for F4 on its own, or by pressing CTRL, ALT or SHIFT key.

  In addition, F11 activates / deactivates sound we / off rather than go full screen in chrome. F12 allows flying mode instead of "Save as" in word.
  Just downloaded and installed the package of value added.

  Am I missing something really obvious?

  * Key change function in series Satellite and Qosmio 800 *.
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  + New computers in the series 800 satellites only use the 'F' numbered keys without using the FN key to get the function. +
  + You can return to the traditional two keys FN key combination if you want by making a change in the BIOS or the HWSetup. +

• Satellite L635-PSK04E - lost Nero after WIn 8 Upgrade

  I'm going to this model never considered in the toshiba Upgrade Wizard?

  I ask because I have already upgraded to Windows 8, but I lost NERO that came with Windows 7.
  It is possible to get from any other place in the same conditions?

  Thank you

  LP

  Hello

  What do you mean by LOST?
  Have you had to uninstall it or what?

  Nero is NOT Toshiba request so it can not be downloaded
  It s just a part of the image and can be used only with image pre-installed on laptop Toshiba.

• Portege Z830: None buttons FN and fingerprints after Win 8 upgrade

  I have a Portege Z830 PT224V with windows 7 64 bit... I went for the upgrade of Windows 8, but get as error "/ windows Explorer is not responding", I decided to clean up the computer and start again.

  I chose a "all delete and reinstall Windows" option in windows 8, which is used when things do not work. By doing this, I got a new installation of windows and eliminate errors.

  Now my 'Portege Z830' specificities as finger print scanning and other controls of forces nouvelles (Fn F6 and F7 to control brightness and all other functions) don't work anymore.

  I tried to download the drivers but seems that they do not enter the set of drivers.
  Is there a way I can back the controls? Maybe some tools or something?

  Simply put: a USB 3.0 port does not work but the other USB 2.0 works correctly.
  Right?
  > because one day before, I had a moment really difficult mounting a USB flash and may have damaged connectors.
  This could be possible, perhaps that damage you it to the other hand, I recommend to check the Device Manager if all USB ports are recognized.

• Re: Satellite L755 - Blu - ray player is not picked up after Win 8 upgrade

  I have a Satellite L755-s1ep and I upgraded to Win8 and my blu - ray player does not work and I can't find drivers or a solution.

  What do you mean by not working?
  Is the drive recognized in Device Manager and listed in Windows Explorer?

• ENVY 15-j004er: HP ENVY 15 after win 10 upgrade do not fingerprint sensor fingerprint validity

  I installed on my laptop HP ENVY 15-j004er victory 10 x 64. I want to use the fingerprint sensor validity to open a session in my after loaded operating system user account, but the sensor is not active. Driver fingerprint sensor validity (sp63418.exe) already installed sound.

  PS HP SimplePass Identity Protection is not compatible with windows 10 is there a way to fix it?

  This teaching has helped me solve a problem!

  Now everything works great!