After you have installed face to face Service pack 2 with network connectivity issue

Similar Questions

• After you have installed windows 7 on my hp pavilion dv4000, vga and audio routed to work. Help me

  After you have installed windows 7 on my hp pavilion dv4000 case, vga and audio to work. help me with a recommended sound and audio drivers for system operational windows 7. Please

  Hello:

  Please click on devices in the Device Manager. Then click on the Details tab. In the properties of the drop-down list, select the second element (Hardware ID). After the first string that will appear for each device.

  Those who will identify the features of model you have and I can try and find the drivers for them.  East - Windows 7 32 or 64 bit, you have installed?

  Paul

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

  After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

  The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

  Is this a known problem and the most important is there a solution for this?

  Thanks in advance.

  Hello

  Base system device is for sure your player card.

  Use your Vista drivers for this problem:

  Ricoh 5-in-1 card reader here

  If there are problems with the excavation using compability mode. How al information here.

  How to solve other problems as unknown device?

  Go to control panel-> Device Manager control

  Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  

  

  

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• network card and other missing drivers after you have installed windows 7 ultimate on my elitebook 8540w

  HP Elitebook 8540w, model WH137AW #ABA - this laptop and was previously running a trial version of windows 7 Professional 64-bit. I wanted to install windows 7 ultimate 64-bit. I chose to install instead of upgrade that I assumed that the demo version was not expandable. Before the installation, I was able to connect to a wireless network with success. After you have installed windows 7 ultimate successfully, I was more able to connect or see all the networks. The diagnosis error indicates that I can miss a network card, or if I don't have one, the driver may need to be reinstalled. I saw a previous post and answer that looked very similar, but the difference is that I am out of my network card driver, so I'm not able to download any other drivers. -help me please!

  Yes... you can do. If you get confused on what to install, please provide the hardware ID.

  HardwareID: (open start, type devmgmt.msc and press on enter.) Double-click on a device. Choose the Details tab, then the hardware in the menu ID drop-down).

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• After you have installed windows 8 my cd rom is not working.

  After you have installed windows 8 my cd rom is not working. Why this is happening

  Most likely your drivers for the cd rom does not have go into Control Panel/System Device Manager and security for all marked devices other devices that may not have installed the drivers. Most likely, you will need to go to your manufacturers website and find the driver for your specific model, you should be able to download and install it from there.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Windows upgrade free 10 can you easily return Windows 7?

  I have to reinstall my applications and hardware drivers? Otherwise it is a matter of circuit breaker.

  Can I uninstall Windows 10 if I do not like it?

  See the following: how: go back to an earlier version of Windows from Windows 10

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.