P7 - 1036b: HDMI Cable of office on television. NO SOUND

Similar Questions

• Re: No sound using a HDMI cable

  Hi, first sorry for my English, but I m French

  So my problem is that when I connect to my pc to my TV with HDMI Cable I put t get the sound than the screen
  Please help me with my problem.

  Can you please tell us which laptop model you have and what operating system are you using?

  Anyway, click with the right button of the mouse on the speaker symbol in the taskbar and choose playback devices option. Is it classified HDMI device? If so try pleaser to choose the option set as default device. You hear the sound of the TV?

• 13 spectrum HP 3004TU: Sound comes only not on the TV through HDMI cable

  Same problem like some users: using Win10 and despite the video past to the TV via HDMI cable I can't get the sound in the PC, and not in the TV. Drilling...

  He said that it is not plugged

  @porrinho

  Try to run this.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72370.exe

  REO

• Once a HDMI cable is in use... How can I watch the Visual on television while using the computer?

  for example... all looking at a Visual played via media player... full screen, the Visual is both on the laptop and the TV via a HDMI cable. Where is the setting, so you can watch the Visual on television, while the laptop was taking full advantage of windows... ?

  Hi Joel,

  Please see the following article on how to configure two monitors in Vista (and also read the referenced right articles that contain valuable additional information): http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors.

  Here is another article on the configuration of two monitors which contains a few minimum requirements: http://skattertech.com/2008/04/setup-multiple-monitors-in-vista/.

  Here's an artidle on how to connect a HDMI TV to a computer and the address where the controls must be.  You probably want to extend the screen rather than clone it (if it has options for this).  http://huestones.co.uk/node/74.

  I hope that these references will help to solve your problems.

  I hope this helps.

  Good luck!

• When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable

  When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
  Can someone please help with this.

  Contact the manufacturer of your laptop.  Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)

• Satellite Pro C850 - 1 K 3 can't connect to a TV via an HDMI cable

  If I use either F4/the windows key + P and select duplicate or PC screen only (or another option) and then plug it into the TV, so the laptop screen and the TV screen are blank. By pressing any key does not display anything on my laptop screen, then when I unplug the HDMI cable that it happens with the second screen only option highlighted. My laptop strangely ignores what I click and returns continually to this option and unfortunately, I can't project the screen on any monitor (I tried 4 separate monitors).

  My laptop was able to be plugged into a TV and I did this several times, but as far as I know this stopped when I had a windows 8.1 update (my assumption, I don't know). I searched the web for solutions, and none have worked. I tried the method of detection of the monitor through the resolution on the desktop option, but again, this cannot be done because I don't see anything on the screen when my laptop is plugged into any TV, and I tried many times.

  Any help is appreciated

  Thank you very much

  I use Toshiba laptops a few years now and what I can say is that you need to connect your laptop to the TV first, select the right port on the TV and then use key FN or F to change between TV Office laptops and connected.
  Connected TV or another external device must be established first.

  Please test once more.

• Pavilion x 360: no sound in my TV when I plugged in my HDMI cable

  Hello, I just bought a HDMI cable to connect my HP Pavilion x 360 on my TV. Unfortunately, I get only video on my TV but no sound. Audio only comes from my x 360 Pavilion. I am aware of the right by clicking on the volume icon and clicking on "playback devices" to defult cable HDMI or TV. Unfortunaly, it is not visible even after activating the devices disconnected and disabled. Please, someone help so I can get sound on my TV as well? I left a screenshot. As a reminder, my HDMI is connected on both sides, and I also disconnected and disabled visible devices. Thank you!

  On my HP Envy, there is a known issue, that the system still does not recognize the new connection, so you get no audio and video.  The solution on my machine is to connect the hdmi cable with the computer and the television to stop (or at less the computer sleep), THEN you will need to activate them in the right order - I think that this is TV first, then computer to find the live TV connection already when it starts / wakes up.

• Above 50 ft HDMI cable will work a Mid-2011 Mac Mini?

  I want to run a cable HDMI 50 feet from the station to my mid-2011 Mac Mini computer to my TV. I want to use a 50 ft HDMI cable. Using a long cable more work or break my Mac Mini?

  In addition, due to the configuration of my TV, I have two HDMI ports. They are tied up with other devices. Connection to a HDMI cable from 50 feet to a dispatcher (on television) will add any stress to my Mac Mini (mid-2011)?

  Thank you very much for your help!

  Google search shows like this

  http://www.bluejeanscable.com/articles/how-long-can-HDMI-run.htm

  Than 50 feet is maximum for an HDMI cable, but that applies to 720 p. Sometimes 1080 p and sometimes not.

  However, I am concerned about the "splitter" you mention. Will probably further reduce the maximum length 50 feet unless it has its own amplifier.

• PAV 14 14-v148ca laptop: no sound on my TV via HDMI cable more

  I used to have the sound on my TV, I tried 2 HDMI cables still nothing.

  I tried to download the links drivers on a separate thread, I found, my laptop does not support.

  I have the video, no sound on my TV when the hdmi cable is connected.

  In the sounds/reading frame, there is only speaker hp and helmet, no television while the cable is connected.

  Please help, this laptop is 5 months old... Didn't!

  On a separate note, why this portable plant so? Because of the Hexacore?

  I click with the right button in the playback window / audio, and click disabled devices. Voila, corrected!

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• HP 2509 m screen flashes and turns off using a HDMI Cable entry

  I have problems with my new HP2509m monitor. When I connect to my cable box using the HDMI connection the screen image flashes for a few seconds and then goes black for a few seconds and continues to do so. The time interval varies from May 3 to 6 seconds in each phase.

  It's the second monitor I got that this behavior. When I bought my system in October I ordered the 23 "monitor and it worked fine with the HDMI input, but I had trouble with the PC and he traded. The 2509 was introduced at the same time so I decided to share my monitor 23 "to 25", but now I'm regretting this decision. The main reason I bought the extra monitor should have the opportunity to move to the HDMI input for TV viewing, save space in my office.

  I tried the monitor using the same HDMI cable plug into the HDMI from my computer and the light is very good, so it seems to be a problem with the signal from the cable, but everything worked with the 23 "monitor leaving I think there is an issue with tuner HDMI monitor 2509.

  I searched the documentation on the HP site and google search but have found nothing of the sort. Someone has seen this and is there a solution for this? I like to keep the monitor. Thank you.

  Message edited by JudgeLeo on 03/12/2009 20:00
  Message edited by JudgeLeo on 03/12/2009 20:03
  Message edited by JudgeLeo on 03/12/2009 20:03

  Apparently, I was early to the part of the questions of this monitor.

  It turns out that the monitor is not compatible with the decoder I've had. The box is made by the Asian Development Bank and is capable of displaying 1080I content. 1080I is not the issue but because I can use a HDMI to DVI adapter and connect to the monitor and it works OK; It is, so I don't have the computer plugged into the DVI connector as I wanted.

  My cable provider was kind enough to take the monitor and test. They discovered that one of their old version of (amino) cable boxes works very well with the monitor. They swapped the box and it worked well since.

  I use my cable provider HDMI cable, so I don't know the spec version that is.

  My advice to anyone affected by the flashing HDMI display is to get a HDMI/DVI adapter and try it. They are supplied with a certain monitors so that they are fairly easy to find if you know someone who works in a computer SCIENCE Department. If the monitor displays the signal correctly then the question is probably the cable box or as another poster suggested, the cable can be out of spec.

  It is convenient to have the double monitor as a TV. The image quality is superb, but the sound is not. I do not understand why manufacturers monitor for skimping on the speakers. A monitor with its 'premium quality' would be a point of sale, and buyers would be happy to pay for the upgrade. I don't know about a lot of people like me it's simplify - remove the clutter and cables of our offices. HP are you listening?

• Connection Satellite L750D to the TV with HDMI cable

  I tried to connect a laptop L750D to a Phillips TV but none is displayed on the TV and the message on the TV is «unsupported video»

  When I connected the laptop to the TV and turned on the laptop, it's in restart mode and the messages showed on TV, but as soon as windows has started to the top of the screen of the TV turned blue and the "unsupported video" message appeared.

  I then plugged a laptop HP pavilion g series to the TV with the HDMI cable and using the same port HDMI on the TV and the computer screen is appeared on television right now.

  Can someone help me please?

  Hello

  Try this:
  Both devices (TV and laptop) must be turned off but connected with a HDMI cable.
  Then turn on the TV and the laptop.
  After Windows has started, use the Fn + F5 secret key to switch the video output to TV.
  Is this possible?

  By the way: have you chosen the right graphic resolution and supported?
  Don't forget that you TV supports the resolution which has been chosen!

• I am trying to configure my laptop so I can watch a show on my TV with an HDMI cable. It doesn, t work

  I have a Pavilion dv7 laptop.  Windows 7 64-bit.  I am watching a video from my laptop to my tv using a HDMI cable and can't seem to get that issue.  Is there a key to seting it upward?

  Hello

  1. first thing I would check: the cable itself, which is its HDMI version, you may need 1.3 or higher? What is your TV (brand, model)?

  2 with the right cable, try the following steps

  (a) turn off the television and laptop

  ends (b) connecting cable

  (c) turn on the TV menu TV allows to accept PC signals (laptop)

  (d) turn on the laptop, go to display you should see TWO screens (1 and 2), select TV

  Kind regards

• I have Windows Xp & have A HDMI cable connecting Tv.When computer not reading a DVD on the computer, good picture & sound BUT on Tv good picture BUT none her WHY? Darryl

  I have Windows XP.
  I have a HDMI cable from the computer to the Tv.I can control the computer through television, if I plug Tv on HDMI2
  When playing a DVD in the computer, I get good picture & sound on computer, BUT on the Tv I hear good picture BUT NO
  Can you please help

  Hello

  I suggest go to control panel - sound and HDMI from default and check if it helps.

  Also, try to update the latest drivers for the sound card and check if it helps:

  http://support.Microsoft.com/kb/283658

  It will be useful.