After you have reinstalled Windows XP, I can not install any service packs.

Similar Questions

• After you have reinstalled windows xp, I can't get windows service Pack 3 update, I get the error code Ox802490036

  After Reinstalling windows xp, I can't get the updates, I get Ox802490036 error it would prevent even me to help live Center of microsoft update... .Please can someone help me

  Hello

  Method 1: Download and install the Windows XP SP3 manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Method 2: Perform operations from the links below and see if it helps.

  Steps to take before you install Windows XP Service Pack 3

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/

  Hope this information helps.

• After you have reinstalled Windows, I am unable to install my Ethernet drivers

  original title: driver help

  I reinstalled windows xp on my compaq.  My enternet driver does not update and has a yellow question mark in Device Manager.  What can I do about it?  I searched all over the internet and don't know what to do?

  Find out what brand / model of the computer. Go to some site, look for the model. Download and then install the drivers for the chipset first, followed of LAN, sound. And all that is in this case.

  Do not get the drivers of anywhere. You can find them in the one that makes the computer / motherboard / everything that is in this case.

  In your case, they will be somewhere on the HP site . You must download on another computer first that ethernet works (the drivers are not installed, so you'll not on the net)

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• After you have reinstalled Windows XP my computer said that having no audio device. How to re-install a new audio device?

  After you have reinstalled Windows XP my computer said that having no audio device.  How to re-install a new audio device?

  A. Si you have the sound driver file install it normally

  or
  B. extract the files to a specified location
  go to Device Manager
  find the audio device with the yellow mark
  Right click and uninstall or update driver
  Select Advanced Setup
  the location of the file
  and follow the instructions

• network not working not after you have reinstalled Windows, where can I get the drivers?

  I reinstalled windows xp professional service pack 2 on my HP and do not think that all the drivers downloaded bc I can't connect to internet or fix ip address.

  I have a hp and dell. I went back two of them to the original os. I have the discks for each of them. However, the dell has a disc to reload the drivers. All I have with the CV is the operating system, Documentation CD and CD of Diagnostics and restore hp more cd. I put restore plus CD first, then reloaded the operating system. I don't think that all drivers have been downloaded because I can not connect to internet. Any help with this?

  Please visit HP Support & software, enter your computer HP model number and click search for drivers Windows XP download.

• Orders admin locked out after you have reinstalled Windows XP

  HP Compac nc4200

  Windows XP SP3

  I just bought this off Ebay as does not - he was throwing an error starting victory.

  I erased the disc & re-formatted and installed WinXP SP3 without any problem.  However, when he started on a functional level, I find I can not access any command system & so can not enter serial number.

  "It gives an error in the sense of ' cannot access the file or the path - you do not have rights to access this command.

  I assume this has something to do with the software of HP security & hangs in the BIOS.  I havee the software to Flash the BIOS - this will fix it, or will I have to disassemble the computer laptop everything & remove the battery for a week (!)?

  Log on as an administrator makes no difference.

  Thank you very much for help forthcoming.

  Geoff

  Good. I'm about to say the same thing that you did... (format with other programs like Hiren's BootCD)

   

• why I can not install a service pack on my laptop with windows vista

  I can't try to install the service pack on my lap top my system is windows vista, there is someone who can tell me what can be the problem?

  Hello

  Here's how could do if you encounter any problems when obtaining the SPs via Windows Update.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I can not install the Service Pack 1 update to my 64 bit Vista system. Get the 66A error code

  I tried several times to install the service pack 1 update on my Vista 64 bit system. It is always fails and gives me the error 66 has code. When I click on using this code I get nothing.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• can I recover the files and settings after you have reinstalled windows vista

  Hello, I just reinstalled vista on computer laptop lm to correct some problems there at - it a way to recover my files from my old windows vista formatting hope that makes sence lol thanks of ;)

  You can retrieve your personal files, but not the settings, even if you could look under AppData in the Windows.old and copy them to their respective directory in the installation of Windows Vista work.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• How can I recover my old email after you have reinstalled Windows 7?

  Under the direction of the MS Support, in order to solve a problem, I had to reinstall Windows 7. After installation, all my old email was absent. Support MS staff member told me that he was not trained to retrieve my email and sent me a link to try it on my own. I failed miserably. I managed to get a few email (Comcast) but only from the date of the re - install and none of my old stuff. In fact I managed to do it in triplicate. As you can see I'm not a computer person. Can someone help me? I need step by step instructions.

  Thank you

  Bill

  Please see the next post to see if can help recover your e-mail:

  How to recover Documents, music, and e-mail after the upgrade

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help please?

  I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.

  I bought a new hard drive, so I had to reinstall Windows.

  After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.

  In the Device Manager, I see that there is an exclamation to these exact components:

  Standard VGA graphics card

  BCM20702AO

  Ethernet controller

  Network controller

  PCI device

  PCI Simple Communications controller

  SM Bus controller

  Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.

  I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)

  Can someone tell me what to do? I'd appreciate any help. Thank you.

  Hello:

  Here are links to the drivers you need...

  First, install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Then, install the graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95652-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  BCM20702AO:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

• Problem product key after you have reinstalled Windows XP.

  Original title: Re-install windows XP

  My computer has a virus and so I had to format and reinstall windows XP.  I'm at the point where I have to enter the product key, but it won't accept it. I tried to change the B of 8 etc, but nothing helped. Can you help me?

  Hello

  1. are you using a CD provided by the manufacturer of the computer, or you use a retail XP CD?
  2 is the key that you are using a sticker on the computer or the one included with a purchase XP?
  3. What is the exact error you get when you enter the product key?

  If you use the key of a sticker on the computer, you need to be sure to use an OEM provided the CD to reinstall.
  The key to the sticker on a computer that says "OEM" will not be able to activate on a Setup from a retail CD.

  Follow the steps in the article.

  You receive an error message after you enter the product key when you try to install Windows XP http://support.Microsoft.com/kb/310637

  For reference:
  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539

• After you have reinstalled Windows XP, I am unable to connect to the internet. Tried to fix the computer with Norton but then decided to re - install.

  I had to reinstall windows xp on my computer.  After that I finally got on it now says it can't find an internet connection.  I have a House on a wired network with a router and modem centeral.  cables and connections are all good, and I was online with Norton tries to fix problems with the computer front of reinstaling windows xp.

  Steve,

  I think that you better install the drivers. I found your other post. Visit the computer manufacturer.
  Cheers! ~

• I have no sound on the computer after you have reinstalled Windows.

  Hello

  I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(

  So the most common answer seems to be getting the correct driver.

  I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.

  I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?

  But then after the reboot, I still have no sound.

  So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)

  in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.

  Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).

  But I still have no sound on my speakers.

  Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.

  Any help would be greatly appreciated! :)

  Original title: speakers work not after fresh windows 7 installed, please help!

  Hello

  Thank you very much for your answers. :)

  I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.

  Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.

  So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:

  Resolution of Windows Audio playback problems

  Which of these devices you want to troubleshoot?

  Select the device that you are having problems with. If the device is not listed, select device are not.

  Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).

  Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).

  Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).

  Unlisted device.

  Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.

  So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.

  So to summarize:

  If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.

  This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.

  I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.

  Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.

  Kind regards

  Brad