After you insert hyperlinks to problem on the legend of text (character to help properties.)

Similar Questions

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• I can remove sp 1 after you download sp 2 to reclaim the disk space

  can I remove SP1 after you download SP 2 to recover the disk space

  See this response archived from a previous thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/why-are-there-so-many-updates-that-there-is-no/072f80eb-ef72-445C-942D-ffa4080de1a7>

  UTC/GMT is 17:00 on Sunday 16 October 2011

• Can you after you have selected a picture with the magic wand just delete the background, leaving only the photo?

  Can you after you have selected a picture with the magic wand, just delete the background, leaving only the photo?

  Or should we use layers to achieve?

  I use Adobe Elements 8.

  Thank you

  Martin

  What is your intention to delete the background - replace the white background transparency or others?

  Keep in mind that if you delete on the background layer (the default name), deletion is replaced by the current color set in the chip of background color as shown in the toolbar. By default, it is white, so if you are selection and deletion of a white background you will end up with white again. If you want that transparency first change the background to a normal layer Layer renaming.

• After you install demo of problem Adobe DC Pro... meets an unexpected failure. Running Win 7. Any ideas?

  After you install demo of problem Adobe DC Pro... meets an unexpected failure. Running Win 7. Any ideas?

  

  Hi garym66400483,

  Please perform this cleanup tool to uninstall Acrobat Download Adobe Reader and Acrobat tool - Adobe LabsDC, reboot your system & reinstall it using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know how it goes.

  Kind regards
  Nicos

• After you create an action to reduce the size and convert them to JPEG format, how to eliminate the word "copy" of each image name?

  After you create an action to reduce the size and convert them to JPEG format, how to eliminate the word "copy" of each image name?

  You can batch process using the image processor script and no user action should still be included in the process.  Check out our menu file > Scripts > image processor.

• no window drop-down list appears after you insert the music cd

  Running 32-bit XP Pro - Microsoft Techs after a virus problem, my computer did not recognize one of the 2 discs (CD & DVD/CD Burner) had fixed a problem, but the residue was that no window does not appear after inserting a disc in the drive of CD Play (D).  The window was the choice on what to do to move forward, for example to burn a cd; Open with MS Media Player, etc..  Now, I have to go to the Start button, right click then select Explorer, then scroll down to the CD drive (drive D on my box) and and then proceed from there to listen to a disc.  How can I get this DOS window?  Thank you.

  DMAN

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/330135

  It will be useful.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Need help after you insert the CMS system

  Hi on my site ive inserted a system of Cushy CMS. It all work that is not the problem. The problem is that my page is a mess now... The only thing ive addes is a code cms so im hoping that the solution is not difficult to do.

  There are three pages what is changed full.

  The home page

  http://www.vakantiewoningeninsuriname.nl/index.html

  The text column to the right is less moved. How is it possible to place this back?

  on http://www.Dorff.nl/ you can see how it was before I add the CMS.

  The next page is:

  http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html

  You can see that there is much more space between the head and the text. And you see that the text is not only the anymmore on the right side.

  This is how it should be:

  http://www.Dorff.nl/bezienswaardighedenparamaribo.html

  It goes the same for this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  And that's how what it takes:

  http://www.Dorff.nl/Prijzen.html

  Hope you can help, thank you for the research...

  Kind regards Brian

  braico wrote:

  Dear Jacqueline,

  Thank you for your reply,

  I'll try to explain again what is wrong. On my website, you see this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  Problem is the image below on the right side of the page instead of the left like the other pictures.

  On:

  http://www.Dorff.nl/Prijzen.html

  You can see what it should look like... Photos to the left and the text on the right. I don't know what happened when im adding the Cuschy CMS. Hope you can see what the problem is.

  You have the two last property on the wrapped page entries in the

  "one_half_last" when that

  must encapsulate the entry of details of each property individually. That is why the last image is more to the right.

  What I would do is remove the entries of two last property (images and text) on the page, copy the code from the entrance of the two property then paste it under twice, making your entries in four properties. Of course, you need to update images and details of the property as well.

  OR if you're good with the code alters entered two details latest properties are isloated in their own "one_half_last".

• After an Insert with DML trigger on the table of the object?

  I am trying to implement e-mail notifications, so I created a procedure that accepts the argument of id. In the procedure, it queries the table and send mail based on the result set. (in the trigger, I pass the value of: NEW.id). The procedure then queries the table for this line id.
  
  First of all, the update after, I received the error:
  
  ORA-04091: table is changing, the trigger/function cannot see ORA-06512
  
  So, I was advised to do in the declare block: pragma autonomous_transaction; I did, and that solved the problem here. THEN I did the same thing in the insert after trigger, but then I get the error:
  
  ORA-00060: Deadlock detected while you wait resource ORA-06512
  
  I asked our DBA and it says that you are not able to query the table on which the trigger is a topic of. I thought that it would be possible since his after insert or update?
  
  Can anyone offer any suggestions? :)
  
  Thank you
  Trent

  SB has given you the first part of the answer I wrote but here's another consideration.

  Suppose you make an insert...
  and the trigger is activated...
  and the message is sent.
  and then the transaction is cancelled...

  There are on the way to recall the message.

  This is another example of why, I think, Tom Kyte, refers to triggers as evil.
  I would recommend that you are looking for another strategy, possibly using DBMS_CHANGE_NOTIFICATION.

• Safari restarts immediately after you stop smoking, or to quit the Force

  I have a problem whereby Safari restarts immediately whenever I quit the app, either through the command-Q or via force quit. I can always restart my laptop when it's market (and Safari does not immediately restart after restart), but sometimes I want to close Safari to remove distractions or save battery. I disabled all Extensions of Safari, but that did not fix the problem.

  An additional bit of weird behavior, it is that once Safari restarts after resigning, the browser window is hidden until I Alt - Tab to Safari.

  I heard that the SIMBL plugins can cause this happens. The only thing I've had has SafariStand, that I uninstalled it a long time ago (and I see all the entries of SIMBL in the Application Support folder or in the activity monitor).

  I use Safari 9.0.2 in El Capitan 10.11.2 on a Late-2008 aluminium MacBook (5.1) with a self installed 240 GB SSD and 8 GB of RAM.

  Any help would be greatly appreciated. Happy to share the newspapers/screenshots. Thank you!

  Chris

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Google chrome will not work after you disconnect it or shut down the computer

  After you download it again, it works fine until I disconnect again. Any idea what is the problem?

  The Feedback forum is not his place for something else questons or comments on the Microsoft Answers site.  I moved your post on the forum of "Programs" of Windows.  You must always mention your version of Windows when you post.

  Answers forums are on Microsoft products.  Ask questions of Chrome in Chrome forums that Google runs.  http://productforums.Google.com/Forum/

• After you have reinstalled Photoshop CS5, among the components of the application are missing from the application directory. Put it back, didn't work

  After you have reinstalled Photoshop CS5, among application components are missing from the application directory. Reinstall the application does not work.

  UINSTALL cs5, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6