age of empirs 3 the D3Dx9_25.DLL file missing

Similar Questions

• Age of Empires III: the Asian Dynasties cannot install the "Art5.bar" of the case and would not proceed beyond this file. I have

  Original title:

  Age of Empires III: the Asian Dynasties

  After a few years with Age of Empires III: the Asian Dynasties uninstalled I recently tried to install it. When the Setup could not install the file "Art5.bar" and would not proceed beyond this file. I tried several facilities with the same result. If it is a zero or a problem with the disc, is there no way, far from buying a new copy, which would allow the installation of The Asian Dynasties or would repair the disk? Is it not possible to force the installation to jump before the installation of the file "Art5.bar" and try to find the file online a patch or another source?

  I found similar questions online and was trying a possible solution, which was to copy files from my drive in another file and try to install from there. Then I discovered that windows can not copy a certain file on the disk, called ' YPack_ ~ 1 ' correctly. The copy process stop, just as the installer of The Asian Dynasties had previously and would not then spent the ' YPack_ ~ 1 ' file. I was also unable to copy the file '00002.tmp', but I was able to jump in front of the copy of the file. I don't know if this file is corrupted and critical for installation, were not able to determine if yes, when you attempt to run Setup from the folder Setup cannot start the installation of The Asian Dynasties without the ' YPack_ ~ 1 ' file. I have not found similar questions online and do not know if this is the issue of the installation of The Asian Dynasties or indicates files corrupted on my drive.

  Hi, I could not also copy the 00002.tmp, but I think it might be due to a cyclic redundancy check indicating a damaged drive.

  Maybe try to download this file from the internet and (after checking that it is the right file) replacing the version on your CD.

• I can't install/editing my "age of empires III the Warchiefs"

  Whenever I have comand to install/editing my "age of empires III the Warchiefs", it is said:
  Error number: 0 x 80040702
  Description: Failed to load DLL: FirewallInstallHelper.

  What can I do to make this work?

  Hello Moh9212,

  Thank you for using the Microsoft answers Forum.

  The error that you have posted, it seems that the game is trying to add a firewall exception to play online and is a problem loading the dll for the specific part of the game.

  The problem you are experiencing could be related to permissions to install the game. Please make sure that you have administrator rights to install the game and all files.

  The question you have posted is related to Age of Empires and would be better suited to the support of Age of Empires community. Please visit the link below to find a community that will provide the support you want.
  http://www.ageofempires3.com/

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get Age of Empires 2: The Conquerors expansion to work on Windows 7?

  When I try to run the game, the screen goes black, then a window pops up saying that the program does not work. I can play Age of Empires 2, but not the extension, it is meaningless to me. Please help if you know how to solve this problem.

  Hi Cat101,

  Age of Empires 2: The Conquerors expansion is not listed in the Windows 7 Compatibility Center. You can check the link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?type=Software&s=Age%20of%20Empires%20II%3a%20The%20Conquerors%20expansion

  As a work around trying to run the game in compatibility mode and check if that helps. Link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Age of Empires III, the warlords

  TRY TO INSTALL AGE OF EMPIRES III-THE WAR CHIEFS, AGE OF EMPIRES III ERROR HAS NOT BEEN INSTALLED FOR ALL USERS, I MADE SURE THAT THIS BOX IS CHECKED WHEN I INSTALLED AGE OF EMPIRES III. I CAN, T INSTALL THE WARLORDS.

  First install patch v1.14 AOE III. then tr warchiefs again to install... If you have several accounts of users first remove these after installation create them...

• where can I find the niscope_32.dll file?

  Hello:

  the problem is like this: I used the function scope in my program, and then I did it in an executable file. but when I copy it to another computer and run the executable file, it will load the file niscope_32.dll

  but where can I find the niscope_32.dll file?

  You should not just copy the exe to a new pc. You create an installer that not only has the runtime, but the driver NOR-Scope.

• ACCOMMODATION OF AGE OF EMPIRES 2 THE CONQUERORS MULTIPLAYER GAMES

  How can I host multiplayer games in age of empires 2 the conquerors? I have no idea why no one can see my game I create when they enter my ip address. Please this is driving me crazy!

  Hi BluWolve,

  Follow the steps in the link below; This could help you organize the multiplayer game.

  The ports that you must open in Windows Firewall to play or to host a game multiplayer in Age of Empires II: http://support.Microsoft.com/kb/895864

  If you are unable to use multiplayer for this game, I would suggest that you contact Microsoft Gaming support for further assistance from the link below:

  http://www.Microsoft.com/games/PC/age2expansion.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  original title: Please help

  just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  Hello

  1A Windows XP installed properly on your computer?

  2. If it is installed, you face any problem with Windows XP?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  Try to do a Scan SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exefile and select 'run as administrator '.
  (d) in the CMD window, type:sfc/scannowand press the Enter key.
  (e) restart and see if that solves the problem.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• Age of Empires 2: The Conquerors is installed but does not work

  So I got this game the other day IT. age of Empires Gold Edition and I already have the age of empires 2 the age of Kings downloaded and it works great no problem. But the Age of Empires 2: The Conquerors, it will not work it only gives me an error or anything it either appears just when I put the disc in the game now and I click on play now and it does not open. I'll click on icon on my desktop and still does not open I just sat waiting with my open office, nothing appears. Please help me if I can start playing

  Hi Brandon,.

  Check if the following article helps you solve the problem.

  Game hangs or quits unexpectedly

• to restore the msvcrt40.dll file

  to restore the msvcrt40.dll file

  If the file has been deleted, you can either try to

  (1) to perform a restore point system through the system restore feature

  'or '.

  (2) use a freeware call "recuva" and it will scan your drive for all deleted files are recoverable.

  be said in passing, do not try to download this dll from any Web site in order to replace your missing one.   If so, you will probably infect your system.

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Vista Home Premium SP2 multiple APPCRASH associated the mscorwks.dll file

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hey Chellse

  one of the worst things you can do for your computer is to use a registry cleaner

  the best you can expect is that it does not damage

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the sfc finds issues it cannot repair consider to borrow a vista of microsoft dvd and do a repair installation upgrade

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.