Unable to connect to HP 8600 (N911g) even if it is on the network

Similar Questions

• Unable to connect to a wireless router (even with a strong signal)

  OK so I have WRT160N (I think version 3) wireless router and my problem is that I can't connect wireless even if the signal is strong...

  I bought last month and it works very well at the time, I can connect my laptop and iPhone, PS3, but now I can't connect either one of them.

  Try to adjust the settings of the router wireless to... Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Wireless tab, change the width of the channel to channel 11 and 20 MHz only, provide a unique name in the name box of the wireless network (SSID). In respect of wireless security, check the security key... In the wireless settings advanced... Change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings... Now let's see if you can locate your wireless network and try to connect...

• When I change authentication to LDAP (EMbedded LDAP) vco for test, vco client is unable to connect to vcenter. Can someone tell me what is the problem I have

  It is seemly all things are OK configuration web page

  But vco client is unable to connect to vcenter

  Have a screenshot of the vCenter plug-in would help.

  If it is set at the session by the user that the vCO will try to authenticate with the LDAP credentials embedded on the vCenter which of course will fail.

• When I try to connect to my Netgear router I get an error that "the network password needs to be 40bits or 104bits depending on your network configuration."

  Hi, I have an Inspiron 6000 labtop Yes it's old but it works :). I also have a Netgear wireless router and I have passwords on my wireless connections and I know of course that the password. When I try to connect to the router wirelessly on what he asks the password as usuall and I type it, and then click Enter. After that, a message appears saying "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "How can I solve this? Help, please!

  original title: wireless network password problem!

  Hello

  Connect the computer to the router with a wire.

  Connect to the menus and change encryption and password length in the privileges of guide.

  Connection with wire to the router and working with the menu should be explained in the manual of the router.

• am now unable to connect to my account online, even if the correct id used to throw me back to sign in the cover page

  FOR THE LAST TWO WEEKS, I WAS UNABLE TO HAVE ACCESS TO MY WE LINE BANKING EVEN THOUGH I ENTERED THE CORRECT SECURITY DETAILS FOR ACCESS, I WAS TOLD THAT MY WEB BROWSER MAY NOT BE COMPATIBLE, BUT I FOLLOWED SEVERAL PEOPLES ADVICE TO HELP SOLVE THE PROBLEM BUT AS YET HAVE NOT RESOLVED IT I ADMIT I'M NOT A COMPUTER GENIUS AND SOMETIMES GET CONFUSED WITH ALL THE JARGON

  What browser and version are you using?  I could communicate with your Bank and see what they say about it.

• Unable to connect to microsoft account, check is not to send me the code.

  I can't connect now, it tells me that I need to check my account but the SMS ever - I tried to change the email address and using them to check just but it enters a loop where I enter the 4 last digits of my phone number... and never sent me the code.

  (Australia here - he sent me a text Message immediately when I changed the email address to tell me that the e-mail has been added in security settings but for some reason some may not send the code to verify the account)

  When I try to use the support site, it just says: "something was wrong, we can't connect just now come back later '- so I can't log on to the Web site account, cannot be verified by phone... I am so happy to have this 'security' that I can not even access my own account...

  Why can I a SMS telling me email has been changed, but cannot get an SMS with the security code? It's driving me crazy...

  Windows Live ID support:
  http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

• In Windows XP, unable to connect on another user account, until I log out of the first

  Hello

  I have three users account on my computer. whenever I try to switch to another user, it is not connect up to that I disconnect the first, although I have hepatitis has checked the fast user switching option, but every time I enter another account passwrd and press enter nothing happens. Please, need help.

  Thank you

  Saami

  Is 'Fast User Switching Compatibility' already 'started' and ' automatic? Also check the 'Terminal Services' and 'Remote Procedure Call (RPC) if they have a "Started" and "Autopmatic". You receive error messages?

• Unable to connect to vSphere Web Client using Firefox or Chrome on the server 2012R2

  I recently installed the web client of vsphere 5.1.0 on my 2K12R2 box.  I get questions that are well known and documented when I try to connect using IE11 (but note that I can always connect to the server vCenter). So I decided to try firefox and chrome.

  With Firefox, I just get a cannot connect error message - Firefox can't establish a connection with the serere to localhost:9443.  When I try Chrome I get "this webpage is not available" with IE it came with the problem with the security certificate, but if I continue I can enter.  Other browsers are set to use the system proxy settings, so I don't ' know what is happening.

  Help!

  Thank you

  Have you tried to set the proxy to 'No Proxy' settings?

  What the system proxy settings are currently configured (netsh winhttp, see the proxy)?

  André

• Unable to connect to Windows error Windows store is not available on the workspace Windows To Go

  Original title: problem opening Windows Store

  When I click on Windows Store I get the error message "Windows Store is not available on Windows to GB workspace.

  How can I fix it, I use a desktop computer not a laptop

  Thank you

  exactly the same problem but I don't have windows 8 pro edition so I can't use gpedit.msc any idea to solve this? I tried all five options and none worked.

  BTW, I think it's STUPID friggin of microsoft to have as much of the element related to group policy, but not GPedit.msc on windows 8 regular edition!... friggin delayed.

• Unable to connect my Officejet Pro 8600 to the network because of administrator settings

  Hello

  I recently bought an opportunity of Officejet Pro 8600 and I am unable to set it to my home network.  When I put in place-> network-> Wireless Setup Assistant (and all options in the network menu and many others) I get a message that says: "this feature has been locked by your system administrator or the person who set up the printer."

  Help, please.  How to get around this problem and unlock all the menu items that are locked?

  A milion, thank you

  D

  Hello derekd01,

  Welcome to the HP Forums!

  I understand that you are unable to connect wireless Officejet 8600 because you receive a message "this feature has been locked by your system administrator. I will do my best to help you!

  There is an administrator through the Embedded Web Sever settings, but in order to access it, it must be connected to a wireless network. Unfortunately, you are unable to access the wireless configuration. There are two options you can try:

  (1) you can connect an Ethernet cord, and then go to the Embedded Web Sever.

  (2) you can install the printer on your computer by a USB cable. Complete installation, and then follow this HP document convert a connected USB printer wireless. Once this operation is complete, you can access the Embedded Web Sever.

  Once you get this printer, follow these steps in the Embedded Web Sever:

  (1) at the very top of the page, click on settings, then password settings
  (2) if there is a username and password, please remove this item and click on apply

  Please post your results, I will be looking forward to hear from your part have a good night!

• Unable to connect to the computer because the password is not be accepted.

  Hello

  So yesterday, I decided to put a password on my pc (Windows 7 Home Premium 64-bit), but when I turned on my pc today, he immediately said that I have to enter a user name and a password first.

  But I did have the chance to fill in anything but it was weird.

  Anyway, I pressed OK and it sent me to the login screen.

  All of a sudden there is 2 users, instead of one, but none of them was my account.

  They both had no name or avatar so they were square just empty, and they're all two protected by Word.

  My password does not work on both accounts, so I can not connect. I tried to get with Safe Mode, but even then he asked me a password!

  I have a few projects out there that need to be finished and send it within 2 weeks so I really need these files.

  I don't mind if I have to format my whole hard drive, but is it possible to go beyond the login screen?

  Or just a way at least to get some files?

  All advice is appreciated!

  -Martin

  Hello

  If you put a password on it, it is normal that next time you start it will ask for this password.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.
  12. etc.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to the App/iTune stores

  Since the 10 update on my iPhone iOS 6s; When I try to open the App Store or iTunes Store, it says "unable to connect".  If I'm real quick when I open the App Store I can successfully hit a button update B4 I get the Error Message.  It tries to open the iTunes store when I try; but without success.  Everything works fine on our iPhone 5 s and my Mac.

  Ok..

  Try here > If you can not connect to the iTunes Store - Apple Support

• Satellite Pro A100 - unable to connect to the internet

  I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
  I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
  I checked all the settings, but to no avail.

  Can anyone suggest anything that could restore the balance of my household!

  How have you tried to connect the laptop to the router?
  A you connect using a LAN cable?

  Are the firewall enabled?

  Please publish more details!

• Unable to connect to itunes connect (2002)

  Trying to get itunes on my phone to listen to my that of on itunes on my computer

  Unable to connect

  Hi Mary,

  I understand that you get the 2002 error when you try to sync your iPhone to iTunes on your computer.  To resolve this error message, please follow the steps below:

  Check your USB connections

  Errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014. You can also see a message that includes "invalid response".

  If the USB connection between your device and your computer is interrupted, you will not be able to update or restore.

  To narrow the problem, try different equipment:

  • Use the USB cable supplied with your device, or another cable USB Apple.
  • Plug your cable into another USB port directly on your computer. Do not connect on your keyboard.
  • Try another computer.
  • The other problems with the USB connection, then with your security software.

  If you still see the error message, search for hardware problems.

  

  Search for hardware issues

  Errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 53, 56, 1002, 1004, 1011, 1012, 1014, 1667 or 1669.

  Your device or your computer might have a hardware problem that prevents the update or restore to complete.

  1. Make sure that your security software and settings are not blocking your device to communicate with the server to update from Apple.
  2. Then try to restore your iOS device twice more when you are connected with a computer cable, and network that you know are good.
  3. Make sure that your security software and settings are allowing communication between the servers of your device and update.
  4. If you still see the error message when you update or restore, contact Apple technical support.

  Get help with iOS update and restore errors

  Take care.