Agent uninstall target grid 12 c

Similar Questions

• Question about uninstalling Oracle Grid Infrastructure software

  
  Hello! I create a new cluster of CARS on IBM Power 7 server running AIX 6.1. I installed grid Infrastructure 11.2.0.3 as a 'practice' race, but I would like to make a few changes. I remember reading about a year on the Oracle uninstall utility 11g. Although it is installed as part of the software, it was recommended at that time to download the OTN deinstall utility.

  That it is always recommended, or can I just run the deinstall utility in my house grid Infrastructure?

  Thank you

  Mark

  Hello

  Please check below notes:

  11 GR 2 CARS: how re - install the grid Infrastructure without disrupting the facilities of RDBMS. [1276975.1 ID]

  Oracle has uninstall utility - 11 g R2 [ID 886184.1]

  Way of GR 11, 2 failed Installation of infrastructure (CRS) grid [ID 942166.1]

  11 GR 2 grid infrastructure - uninstall the rootcrs.pl script failed [1174384.1 ID]

  And please read this link: How to change or uninstall Oracle Grid Infrastructure

  Thank you

• Agent is blocked GRID 12 c

  Hello

  I have an agent status blocked after uninstall/reinstall, but it has been removed from the GRID during the uninstall, and I see no more. The agent does not appear in the results of auto-discovery.

  Pace heart status: what agent is blocked

  Blocked reason: Agent is out-of-sync with the repository. This probably means that the agent has been reinstalled or recovered. Guilty plea

  to contact an administrator of the MA in order to unlock the agent by performing a resynchronization of the agent from the console.

  Last heartbeat to WHO attempt: 2015-01-26 08:55:09

  Last pulse successful who: (none)

  Then, at the request of the heart rate to WHO: 2015-01-26 08:58:09

  ---------------------------------------------------------------

  Agent is running and ready

  I tried the addInternaltargets, clearstate, but Agent command line is everywhere in my GRID but still blocked.

  Is there a way to remove it with a method other than "exec mgmt_admin.cleanup_agent" because it does not appear in the sysman.mgmt_targets ...

  Thanks for your help

  Carl

  I would like to reinstall the agent. For more details, see the MOS EM12c of Note: How do I uninstall the control of cloud in Enterprise Manager Agent (Doc ID 1368088.1) 12 c

  Concerning

  Borys

• Agent uninstall

  It is so basic that is not yet in the documentation. I made a mistake and I want to know how to uninstall an agent.
  
  I simply delete the folder and that's it?

  Hi nibb,.

  Yes, that's all. For the version of Windows it is an uninstall program I think. If you have saved the Agent to the HQ server, you want to remove the platform before you delete the folder.

  Mirko

• VMware View Agent uninstall Script?

  Looking for a way to uninstall the vmware view vmware tools and agent according to a method by script for several hundred VMs.

  Based on what is the best way to eliminate all the problems on the road - http://myvirtualcloud.net/?p=952

  I've been able to find the standard controls "installation and silent update" and not actual uninstallation of the two elements.

  A .bat or .ps1 would be great.

  Thank you!

  Steven

  Place these in a bat file

  MsiExec.exe /X {E1BF8D0F-3C8E-43F8-93E7-9E779B2F25AB} / quiet

  MsiExec.exe /X {FE2F6A2C-196E-4210-9C04-2B1BC21F07EF} / quiet

  Check these values by displaying HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall\ (search for VMWare).  You should very well an entry to see Agent and one for VMWare Tools by looking at the DisplayName value then you can confirm the chain of elimination glancing UninstallString for each.

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• After uninstalling the grid Infrastructure: virtual host name [INS-40912] assigned to another system on the network

  Hello

  I deleted successfully installed grid Infrastructure software. Now, I installed again it but the installer complains about '[INS-40912] virtual host name assigned to another system on the network", which he complains not in the first installation process. :/

  EDIT: I checked and both nodes of the cluster are interpingable through their virtual IP address.

  I see that the previous installation has created a clean interface for this virtual IP address:

  eth0:2	Link encap HWaddr 00:50:56:B9:0E:AA
  	INET addr:10.200.11.159 Bcast:10.200.11.255 mask: 255.255.252.0
  	RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
  	Basis of interruption: 19 address: 0x2000

  OK solved: I just do:

  ifconfig eth0:2 down

• installation of grid control Agent (11.1) on a node RAC 2 (11.2)

  Hi, I am preparing an installation of push (11.1.1) Agent of the grid on a 2 DB of RAC (11.2.0.3) node as user 'oracle '. Is there a problem with using id 'oracle' for push Agent too? (oracle is the owner of the RAC cluster too).
  
  Kind regards
  Lily

  Hi Lily,

  You can use the accounts to the same users or different OS to install a database, a CMS or an agent. If you use different user accounts, ensure that the owner of the agent software is in the same group of BONE as the owner of the software of the monitored targets (for example to read the file journal alert a target database).

  Kind regards
  -Loc

• A host is not on the list of targets after the agent is installed correctly.

  We assume that:
  
  «You cannot add host targets or objectives of Agent using the Grid control pages.» Instead, these types of targets appear automatically in the control of the grid after the Oracle Management Agent installed on a host computer. »
  
  And so far had been true.
  
  However, I have a problem with the installation of an agent. Despite be installed correctly and communicate with the agent, it is not displayed in the target list.
  
  Any ideas?
  
  
  c:\oracle\product\grid\agent11g\BIN > emctl agent status
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Agent home: C:\oracle\product\grid\agent11g
  File binary agent: C:\oracle\product\grid\agent11g
  Agent process ID: 184
  Agent URL: https://CA20xxx.xxx.es:3872/emd/main /.
  URL of repository: https://asexxx.xxx.es:4900/em/upload
  Started at the: 2011-11-08 18:15:32
  Started by user: SYSTEM
  Last reload: 2011-11-08 18:15:32
  Last download successful: 2011-11-08 18:16:47
  Total megabytes of XML files uploaded so far: 0.01
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 58.60%
  Last attempt heartbeat to WHO: 2011-11-08 18:28:52
  Last pulse in SGD: 2011-11-08 18:27:51
  ---------------------------------------------------------------
  Agent is running and ready

  Hello

  Try this.

  Stop agent

  * Delete files in $ORACLE_HOME/sysman/emd/State and $ORACLE_HOME/sysman/emd/upload

  * clearstate agent

  * Agent unsecured

  * Sure agent

  starting agent

  Download the agent

  Concerning
  Jomon

• Oracle 11g grid control software agent for SUSE 10.2 64-bit Linux.

  I have a hard time locating the agent software from the grid control, for 11g on Linux SUSE 10.2 64-bit. Does anyone know where it is? I checked the download for linux 64-bit software, nothing seems as the agent of the grid control. I searched metalink and these forum. Please let me know if you know where I can find. Thank you.

  Hello

  It is not the version 11g agent or SGD.
  I use
  Agent version: 10.2.0.4.0
  Version of the WHO: 10.2.0.4.0
  Protocol version: 10.2.0.4.0

  to take charge of our 11g db and I have no problem.

  Kind regards
  Tom
  http://OracleDBA.cz

• How to find the host agent

  How to find OEM agent House?
  
  I need to install the agent in OEM grid again on the DB server and register again in OEM. Can anyone tell please the steps to do it?

  Assuming that he is an agent of 12 c pre EM on a non-Windows platform, you can find an entry for the House of the agent in/etc/oratab or/var/opt/oracle/oratab depending on the operating system platform.

  The following entry of oratab sample showing the Oracle home for the agent's / u01/oracle/agent11g:
  *: / u01/oracle / agent11g:N

  To uninstall an agent, see:
  http://docs.Oracle.com/CD/E11857_01/install.111/e16847/part_deinstall_slnt.htm#sthref435

  To install an agent, see:
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_agent_usng_console.htm#CACJEFJI

  Note: If the agent and its targets monitored are still in the repository (for example, the console still shows them), you can remove them before reinstalling the agent to avoid having download due to duplicate targets problems later.

  Kind regards
  -Loc

• Agent shared over NFS installation

  I'm trying to deploy EM 12.1.0.2 agents on a RAC 2 nodes in the cluster with a shared directory on NFS. After installing the first agent I use the instructions in the http://docs.oracle.com/cd/E24628_01/install.121/e24089/install_agent_usng_shrd_hm.htm documentation to install the shared agent.
  Deployment Type-> add a shared Agent Host
  Target-> node1
  OH-> same as target on node 1 (/ u02/oracle/agent12c)
  Instance->/u02/oracle/agent12c/node2/agent_inst
  However, he fails the prerequisite steps because it detects an agent on the host computer. Here is an excerpt of the newspapers which gives the pre-reqs has failed:
  
  2013-05-13_11-43 - 34:INFO:DESCRIPTION: it is a precondition to ensure that there is no agent host does exist on the host computer. RESULT: WARNING RESULT TEXT: expected result: MS Agent should not exist in the host.
  Result: A home agent already exists
  Full version. The result of this review is: failure of < < < <
  2013-05-13_11-43 - 34:INFO:DESCRIPTION: it is a precondition to check if the Agent Oracle Home or install Base Directory, is already registered with the inventory RESULT: TEXT OMITTED from the RESULT: expected result: New Oracle Home Agent should not be stored with the inventory
  Actual result: Agent Oracle Home with the same /u02/oracle/agent12c/core/12.1.0.2.0 value exists
  Full version. The result of this review is: failure of < < < <
  
  Anyone seen this before?
  
  
  Thank you
  Leighton

  I upgraded 12.1.0.3.0 NFS agents, but there were some errors during the upgrade. It was not properly detect the version of the correct agent so I uninstalled the agent shared only. Now I'm looking for the re - install the agent using the silent installation process.

  The master agent is already installed and I try to create the list of plugin using the master agent but his failure.

  $AGENT_HOME/perl /u02/oracle/agent12c/core/12.1.0.3.0/sysman/install/create_plugin_list.pl instancehome - / u02/oracle/agent12c/agent_inst

  The Base Dir is

  File: /rwFile

  Failed to create the plugin file.

  Make sure you have permission to write

  It seems to be using the incorrect agent Base Directory.

  . / agent of getproperty emctl-name agentBaseDir

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  agentBaseDir = / oracle/u02/agent12c

  Any thoughts?

  Thank you

  Leighton

• The administration server is not reachable from the node target via HTTP (S)

  Hi all
  
  I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
  
  Server Oracle 12 c - OS is SunOS 5.10
  Client host Oracle 11.2.0.1.0 - OS is AIX
  
  During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
  
  How can I solve that?
  
  B.R

  You already mentioned the metalink note? Otherwise please see note

  EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]

  Kind regards
  http://www.oracleracexpert.com
  Remove the grid or the repository targets control agents
  http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
  Tablespace transportable export and import on the same Endian platforms
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

• the agent requirements

  I have installed an agent on a new machine... Agent status seems good... the agent url and download url works agent... grid control accesses the url of the agent...
  control of grid agent is up... but when I enter the credentials for the agent or the host, they do not... the agent and the host take a few minutes to open when I click on them...
  
  both servers are windows 2008 R2 64 bit
  I know that the server on which the agent is installed has the Server service, workstation service and file sharing is turned off...
  If these are needed by the agent... is there something else on the server which could be disabled and causing the credentials entered in order to not work... (name of user and password has failed)
  the used user ID is a system administrator...

  you use a proxy? This bit here

  2011-11-02 01:09, 159 [EMUI_01_07_45_/console/admin/rep/emdConfig/emdTargetsMain$target=PermitTest.okladot.state.ok.us_3A3872$type=oracle*_emd] ERROR emdConfig.EmdConfigTargetsData storeUploadManagerStatus.1604 - java.io.IOException: cannot establish a proxy connection: 404 not found or unresponsive, errno host: 78

  I had the terrible evil with a proxy on a site, have you configured patches and connections to avoidance for local addresses in the configuration of the patching?

  I had to download windump and winpcap, had run it in a newspaper, try the connection, got an error similar to yours in the emoms but in the log file windump I saw a return of the proxy that neither grid control refusal or emoms log file articulated. Once I've set up patching in the grid, I spent.

• Unable to connect to databases via Grid Control

  Hello world
  
  I have seen similar topics on the forums, but none of them could help me.
  
  I installed version OEM Grid Control 5 on a rhel 5.3. I started to deploy agents on multiple hosts (windows 2003 and linux). I now opened ports in the firewall:
  TCP_4889: agent-> control grid
  TCP_1521: grid-> agent control
  TCP_3872: grid-> agent control
  
  Agents are up and I see all the instances in the target/databases tab.
  Here's my problem:
  The State of each instance is Metric Collection error and the message is * "this database is not configured."
  
  When I click on Configure , then test the connection , I have the following error:
  Unable to connect to the database: IO exception: connection is the connection descriptor was (description = (address = (host = myserver_hostname)(protocol=tcp) (port = 1521)) (connect_data = (service_name = instance_name) (instance_name = instance_name)(UR=A)))
  
  When I connect to the server, I can connect to the database, the listener is in place. But emctl status dbconsole says:
  TZ set to Europe/Paris
  OC4J Configuration problem. $ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_servername_instancename not found.
  
  But this file is...
  
  Any idea?
  Thank you very much

  ORA-01017: name of user and password invalid.

  Network server connect to the use of target-> "general" user database

  "" So, make target you as 'general' on the database "not blocking" status and course of password.

  Example: on the basis of data target

  SQL > select username, account_status from dba_users where username = "GENERAL";

  USERNAME ACCOUNT_STATUS
  ------------------------------ --------------------------------
  OPEN DBSNMP

  SQL > connect dbsnmp/pasword@target_database

  After this trial once again ;)