installation of grid control Agent (11.1) on a node RAC 2 (11.2)

Similar Questions

• grid control agent

  Hello
  
  I have a database of the RAC 2 node 11.2.0.3, version of the OS is RHEL 6.1
  
  Our installation of server control existing grid is 10 gr 2.
  
  Can I install 10.2.0.5 agent on my CAR and using the 10g grid to monitor my 11.2.0.3 database (RHEL 6.1)?
  
  Thank you
  Vishal

  There are a few different components. You have the database repository, the who and the agent that is installed on your target databases. I created a separate database repository, that didn't impact my 10g repository and WHO, until I had all this work with 12 c. Of course, you can improve if you wish, rather than taking this separate repository/WHO approach. Your call.

  I've done the following:

  (1) create a 11.2.0.3 for the repository database. I had it on the same server as my 10g database repository. Make sure you have enough memory etc. before you go and create a new database.
  (2) create a HOUSE of SGD 12 c Release 2. It was also on the same server as my 10g SGD. Point this WHO 12 c on the database created in step 1.
  (3) install the agent of 12cR2 on your target databases. I think it could be a conflict with the agent of 10 GB, so it must be uninstalled first. I don't remember for sure however, so you can check on MOS or raise an SR for this.

  I exported my models of my deposit of 10g and imported in the using 12 c before applying it to the target databases, listeners, etc.:

  emcli export_template ........
  emcli import_template 
  

  Please note that the 12.1.0.1.0 and the 12.1.0.2.0 both are based on RHEL 6. Your choice as to what you need to install but I have 12.1.0.2.0.

• 11g grid control, agent unreachable

  Hello
  I saw in Grid control for a specific database, displays the message error: Agent unreachable.
  
  go on this server, do.
  
  Agent status $emctl
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Server: Lotus Expeditor Web Container/6.1
  Content-Type: text/html
  Content-Length: 122
  
  ---------------------------------------------------------------
  Agent runs but not ready
  
  
  
  Any idea?
  
  Thank you
  
  Edited by: 951932 29 August 2012 08:17

  Look for them
  $AGENT_HOME\sysman\log\emoms.log and $AGENT_HOME\sysman\log\emoms.trc and take action

  Normally below a series of steps should help:

  . / emctl stop agent

  . / emctl clearstate agent

  . / emctl unsecured agent

  . / emctl upload agent

  . / emctl secure agent

  . / emctl status agent

  Published by: renee_mathieu on August 29, 2012 08:24

• 11g grid control agent configuration

  Hello guys,.
  
  I have the problem with the configuration of the control agent Grid 11 g. The root cause of the problem is that the target machine is in the DMZ area. So, it lacks the active ports. Other agents, I have installed is working properly.
  
  The I'm talking about is able to download the data, but in the case of your setup I get the error message: "error occurred while obtaining information for the specified target. Possible reasons include: the target doesn't exist. failed to connect to the target. »
  
  Here, you're out of emctl agent status
  
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Home Agent: / orahome/agent11g
  File binary agent: agent11g/orahome.
  Agent process ID: 3011
  Parent process ID: 2985
  Agent URL: https://demodb:1830/emd/main /.
  URL of repository: https://admin:4900/em/upload
  Started at the: 2011-02-11 10:23:43
  Started by user: oracle
  Last reload: 2011-02-11 10:39:40
  Last download successful: 2011-02-11 17:04:08
  Total megabytes of XML files uploaded so far: 20.98
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 14.21%
  Last pulse in SGD: 2011-02-11 17:13:05
  ---------------------------------------------------------------
  Agent is running and ready
  
  emctl status who-details
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  Enter the password to Root of Enterprise Manager (SYSMAN):
  Console server host: admin
  Console HTTP port: 7788
  Console HTTPS port: 7799
  Download HTTP port: 4889
  Download HTTPS port: 4900
  SGC is not configured with the PES or virtual host name
  Download of the agent is locked.
  SGD console is locked.
  CA active ID: 1
  
  Active ports:
  Admin to demodb-1830
  of demodb to admin - 4900, 4889
  
  What other ports available to be activated? 1521?
  
  Thanks in advance!
  Good day

  Then I think it's time to start checking the logging firewall product to see what the port is blocked and why it is blocked. Ask your technical firewall guys/girls so he or she can do. Otherwise, it will become a never-ending story.

  Eric

• 11g grid control agent configuration - rac

  Hello everyone,
  
  Please could check my problem with the rac server configuration?
  
  [oracle@s28rac2 bin] $. / emctl status agent
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Agent home: /orahome/agent11g/s28rac2.bscpraha.cz
  File binary agent: agent11g/orahome.
  Agent process ID: 20149
  Parent process ID: 20131
  Agent URL: https://s28rac2.bscpraha.cz:3872/emd/main
  URL of repository: https://s28admin.bscpraha.cz:4900/em/upload
  Started at the: 2011-02-22 15:09:59
  Started by user: oracle
  Last reload: 2011-02-22 15:09:59
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0.00
  Number of XML, files awaiting download: 35
  Size of the XML files in the upload wait (MB): 33.12
  Available disk space on the file upload system: 15,17%
  Last attempt heartbeat to WHO: 2011-02-22 15:11:19
  Last pulse in SGD: 2011-02-22 15:10:18
  ---------------------------------------------------------------
  Agent is running and ready
  [oracle@s28rac2 bin] $. / emctl upload agent
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  MDT download error: could not download the file A0000001.xml: HTTP error.
  
  Same problem is on the second node, but it is disabled by the Download Manager. No note is located inside the control grid - setup-> blocked agents...
  
  Thank you!

  You ensure the Agent?

  emctl security officer

• Grid control agent 11.1.0.1.0 / WHO 11.1.0.1.0 PSU patch

  Hello
  
  I'm looking to patch SGD 11.1.0.1.0 to 11.1.0.1.4, im however slightly confused about the weather it is patches available for GC officers POWER supply - I don't seem to be able to find something on MOS.
  
  Am I right to think that there are no patches PSU for 11.1.0.1.0 of Agents still?
  
  Thank you

  The deployment of the agent remains the same. You could create a clone of your 11.1.0.1.4 agent again host facilities or continue to patch manually agents to supply FOOD 4 after you have deployed it (I prefer the pull method). In 10.2.0.5, we did a lot of cloning, now that we're done with 11.1 upgrades, it's time for the establishment of a 11.1.0.1.4 clone.

  Published by: Sal Sep 2, 2011 15:15

• Installation of grid control

  Hello
  
  I currently have GC to install on a RH Linux 64-bit server.
  I don't see were HR X 86-64 bit is included as a platform name in the ARU_ID_DESCRIPTION
  There is - a Linus AMD - Linux x 86 64 - 64 bit. As Itanium, PPC and zLinux.
  
  I wouldn't have software for Red Hat Linux 64-bit?
  
  Can I have a GC installed and running on a server and install another GC on another server
  and use the same agents of all my servers?
  
  I want to make my GC to another server and then stop the older one and delete when my new GC is running at 100%?
  
  Thank you...

  No, they will work, Yes, you can point the agent to the new server.
  Please see the section "Reconfigurer the Management Agent and Management Service."

  http://download.Oracle.com/docs/CD/B16240_01/doc/EM.102/e10954/postinstall_config.htm#CBDCDIBB

• Download the invalid software from OTN for Grid Control 11g on Linux x86_64

  Hello
  
  I want to test Oracle Grid Control 11g, but among the files zip is invalid. This is the name of the file:
  
  GridControl_11.1.0.1.0_Linux_x86 - 64_2of3.zip
  
  Decompression gives an error and also checksum is not the same as it appears on the OTN download site. Installation of Grid Control 11 g translates into I/O-error. Could you please fix the download file?
  
  Thanks in advance!
  
  Greetings
  Benni Gampert

  Hi Benni,

  Try to download the same software of Oracle e-Delivery Web site - http://edelivery.oracle.com/

  Thank you
  Hussein

• 11G Grid Control Installation.

  Hello
  
  I need to install 11g grid control in a server, using the grid control, I need to maintain and manage 4 different databases, they are running in different servers.
  
  Please guide me what stage I must follow.
  
  Note:
  Each target, I need to install the management agent? and how to install the management agent?

  I suggest that get you the latest version on EM 12.10.2 rather than 11 g. You can install costs em 12.1.0.2 SGD and agents to install 12.1.0.2 on your DB. Agent note 11g will not work with 12 ch. SGC or vice versa.

  EM 11 g installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
  agent installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_agent_usng_console.htm#CACJEFJI

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• Install the Control Agent Grid 10.2.0.5 on Oracle Applications 11i

  Hello
  I'm planing to add my Oracle Applications 11i (application and DB layer) to Grid Control 10.2.0.5, install the Agents of grid control (10.2.0.5) on both nodes.
  Please tell me is there any specific in this installation of GC officers on nodes of Oracle Applications 11i (any document on this subject).
  
  Concerning

  Hello

  Please see these docs/links.

  Getting Started with Oracle Change Management Pack Application and Oracle Application Management Pack for Oracle E-Business Suite, version 3.1 [ID 982302.1]
  The management of Oracle and Oracle Application Change Management Pack applications Pack for Oracle E-Business Suite, version 3.0 [ID 812315.1]
  Guide to troubleshooting and the list of known issues for Oracle Application Management Pack for Oracle E-Business Suite, version 3.0 [ID 812294.1]
  Grid control 10.2.0.5.0 known issues [ID 787872.1]

  Application Management Pack and Application Change Management Pack 3.1 now available
  http://blogs.Oracle.com/stevenChan/2010/01/amp_acmp_31_ebs.html

  Enterprise Manager Documentation - 10g Release 5 (10.2)
  http://download.Oracle.com/docs/CD/B16240_01/welcome.html

  Thank you
  Hussein

• Oracle10g grid control installation - management service hostname

  Oracle 11g R1 RHEL 4 64-bit
  Grid Control 10.2.0.4
  
  Hi all
  
  I install the Oracle agent and when I get to the screen 'Specify Oracle Management Service rental' asked 'Management Service host name'. Is it the same as my host name of the database server? I don't know what to put here. When I do not have the host name of the database server in, and then he said: he can't locate port 4889 on this server. However, if you continue through the Setup all succeeds in the end. BUT, when I go to the link http:// < management_service_hostname >: 4889/em then nothing appears. I'm new with grid control. Anyone have any ideas?
  
  Thank you.

  OK, so you say install Grid Control 10.2.0.3 and then patch it to 10.2.0.4 can then be used with 11g? I think that I get it now.

  Correct, since you have a 64-Bit, 10.2.0.3 full installer is available for this OS.

  Thanks Bobcatalog

  You are welcome

• agent of undiscovered database grid control

  Hello
  
  I installed the agent 12 c under user oracle grid control-> we use oracle userid to install grid agent oem12c
  but I have a hypd database running on the same server under user PHyp. We used PHyp userid to install the hyperion database.
  
  now when I try to add the database in 12 c agent is not to find out.
  
  appreciate any suggestions.
  Thank you

  Assuming that the database in question is an Oracle database, check that:

  -The owner of the agent software can read the/etc/oratab or/var/opt/oracle/oratab file depending on the platform.
  Note: For the discovery of database work, it is necessary to have an appropriate entry for the database in the oratab file.

  -The owner of software agent (oracle) should be in the same group of BONES with the owner of database software (PHyp) to allow reading and enforcement officer some files in the database host.

  Kind regards
  -Loc

• Upgrading to 10g to 11g agent and switch to another grid control

  I have sent a NEW Grid Control 11 g on a new server, but all my targets are enrolled in an OLD 10 g grid control.
  
  Now, I would like to upgrade an agent 10 g saved with grid OLD command 10 g for an oracle target 10.2.0.5 dabase running 32-bit Windows),
  using the pull (agentDownload.vbs) method.
  
  It is supported to run agentDownload.vbs in upgrade mode by specifying the NEW grid control?
  
  My environment:
  OLD Grid Control 10.2.0.5 on Windows 2003 x 64
  NEW 11.1.0.1 on Linux x 64 Grid control
  Oracle 10.2.0.5 database TARGET. Standard running on Windows 2003 x 86
  
  Thank you
  Julian

  Hi Julian,.

  You cannot run this mentioned during the upgrade. But after upgrade, you can point a WHO to another agent using the following document:

  How to point an Agent to a different grid WHO control and a repository? (Doc ID 413228.1)

  NOTE: Please note that this procedure is valid only for the agents of 10 GB & 11g. This procedure is not valid in 12 c.

  Best regards
  Vincent

  Published by: Vincent thiruveedhi on April 19, 2012 02:57

• Grid control installation

  Hello!
  
  
  To install the Grid control
  
  -What is the possible version of the database for the grid control,
  -where it is possible to download the application of the grid control?
  
  Please notify
  
  Thank you and best regards,
  Pavel

  Hi Pavel;

  -What is the possible version of the database for the grid control,

  -where it is possible to download the application of the grid control?

  The latest version is 12 c
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html?origref=http :// www.oracle.com/us/technologies/grid/index.html

  To see the facility:
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/documentation/index.html
  Master Index for the grid Service control management (OMS) high availability (HA) environment: Installation and Administration [1304492.1 ID]

  "" PS: for your problem of future grid, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "business management" Enterprise Manager which is dedicated GRID forum site.

  Respect of
  HELIOS