AHCI mode default endabled?

Similar Questions

• Pavilion p077tx: AHCI mode enabled by default?

  I have attached a screenshot just told me is AHCI mode enabled or not? Because there is no information in the BIOS

  for one SSD installation, the device manager should see the SSD

  He sees only one volume, it does not

  the new Bios from HP is AHCI mode enabled by default

  for the clone readers install or use USB 3.0 to 2.5 "SATA III Hard Drive adapter cable w / UASP

• Cannot set in AHCI mode for disc SSD NB300

  Hello

  I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
  I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine!

  Read on the SSDS, I see that a better performance for executing the SSD in AHCI mode.
  So I went to menu configuration of startup and changed compatibility in AHCI mode.
  I actually tried a few times, always with the same result, failure!

  When the system is trying to start I get a message saying that there was a problem and that
  the system is trying to gather information.

  The only solution is to go back in the program installation and handed to the compatibility mode.

  The BIOS is up to date, and I just don't see any way to solve the problem.
  I really want to get best performance with this net book as possible.
  I have a screenshot of the details of Speccy SSD drive, but I don't see a way of fixing?

  If anyone can advise me on how to get mounted AHCI mode and go that I would be really grateful!

  Thank you

  Chris

  Unfortunately on this forum we don t have reports on the use of the DSS on NBs I have NB520 and I would use the SSD for, but so far I didn't find the right.

  As far as I know by default BIOS is set to AHCI mode. What operating system you have installed? The original that you got with your laptop or your own version? Have you installed the s Intel Storage Manager of the Toshiba download page?

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.

• Cannot change SATA RAID in AHCI mode in the BIOS.

  Hi, I use Pavilion p6142p Desktop, WIN7, a harddsik.  The SATA BIOS has been set to RAID by the default value of the factory.

  I put two new hard drive in this office, they have different sizes and different rpm speed, I don't want their RAID.  So I tried switch the BIOS SATA AHCI mode, so I can't start the win7, win7 gave me two choices: repair or return, repair is not too.  After I change the BIOS, everything is OK.

  But I have to put all three harddisk in this office. So my question is:

  I use RAID in this PC?

  Do I have to re - install win7?

  ....

  In any case, what should I do?  Thank you.

  d1ad1a,

  RAID will work with unlike devices.  You can always install your new discs and give it a go.

  It seems that the ugly way is going to be your only for the ACHI mode to work. Alternatively, just live with what you have.

• SSD upgrade problem AHCI mode

  Hello.

  I want to change my HDD with ssd (OCZ Vertex 4)

  I have HP Envy 17 2101er

  and I can't find the AHCI mode bios setting

  How can I do that.

  I do it first time

  RAHIMLI

  It is already set to ahci by default. You can just go ahead and install the SSD

• AHCI mode support?

  I have a hp dv6 6178sl (i7 2 - gen 2670qm, Intel HM65 motherboard) with win 8 is installed.

  Is my supported portable ahci mode?

  I bought an ssd unit, so I need activate this mode... under the bios I can't find this setting... but under windows, in 'Device Manager', I see this point:

  Controller IDE ATA / ATAPI--> Mobile Intel (r) Express Chipset SATA AHCI Controller

  I so ahci activated already? Can I put in my ssd without any problem?

  Hi, Milite777:

  You are 100% correct.

  BIOS of the laptop is on AHCI by default, or you would not have seen that the Intel (r) Mobile Express Chipset SATA AHCI Controller listed in Device Manager under IDE ATA/ATAPI Controller section that there are listed.

  You don't need to do a thing... just remove the battery and the a/c adapter and install your SSD.

• Windows 7 Professional x 64 will not install in AHCI Mode

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-ultimate-x64-will-not-install-in-AHCI/282886d4-a614-405f-aa33-f484e7ce5e6d?page=2

  I'm having a similar problem and wonder what the final steps / solution?

  When I tried this with Windows 7 Pro 64 bit does not recognize the H.D.

  I also read KB and think it doesn't look good for the installation of the driver.

  If must go to AHCI at all and what I said is that AHCI mode is for the correct entry for drivers on the disc. and if it raises a question?, if it is impossible to install windows initially in AHCI how is that windows has been installed correctly at all?

  My system is going to be the motherboard Asus M5A99X, Six cores AMD 1090 t., 12 GB ram, Windows 7 Pro 64 bit.

  I have also had similar problems with my Asus M4A88TD-V EVO/Usb 3.0 is the original built the motherboard and is the motherboard present until I have find this and am hesitate to disassembly and reconstruction with the new M5A99X.

  Here's what I posted on my Asus Forum;

  http://VIP.ASUS.com/Forum/view.aspx?ID=20120422012743839&SLanguage=en-us&board_id=1&model=M5A99X%20EVO

  I just bought this new M5A99X now (previous motherboard has been renovated and has no sound, no disk support, from Newegg.com) from Microcenter and I hesitate to start tearing down and rebuilding of my custom version until I have find this AHCI configuration.
  On my previous motherboard, I tried this and it do not see the HARD drive.

  It's confusing, because if one thing works another doesn't 0_o

  I read the http://support.microsoft.com/kb/922976 on AHCI and;

  What is appropriate for the correct configuration? SATA and AHCI first, then if the AHCI drivers are not loaded, then again on AHCI (immediately) and then keep in AHCI or sata and SATA when?

  When I read it; http://support.Microsoft.com/kb/922976 it seems to suggest that I have to install mode SATA, then REGEDIT. problem is that if my computer falls down before that I still have the chance to do it then what?

  I do not currently make a Raid Config just a normal installation on a Seagate beracutta 2 TB 6 GB/s hard drive.

  I also posted on Microsoft Technet http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2

  I have rebuilt since the system and it was easier than I thought that the new motherboard was set as the default AHCI. When I installed windows there is a driver load option and clicking while I was able to load the AHCI driver from the DVD player. the old motherboard there are a lot of other steps and it's more than the new motherboard diffacult. It was so much better in my other post on the forum, and thanks to these people http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2 response

  all other replies to this post were of no use to me and so I hope that I have helped those who were also trying to understand this. THA post above that says he suggested to install windows 8 and this post has nothing to do with windows 8. forum message header said WINDOWS 7! where the reason why I make my answerts of the technet forums instead! Trying to sell a BONE? Im just trying to get my work and try to sell me a new OS is not going to happen with these existing answers.

  I don't have to wonder why, in one of the previous answer, so-called, was told not to post my other post on the forum. but there again question me answers in this forum.

  There are people who are eager to build computers and try to understand this thing of AHCI driver.

  on the old motherboard, it was not so easy to do. I wonder why Microsoft has a processor intel AHCI driver built in? and not as an AMD one to be recognized by the operating system.

• Satellite P300-20-player not recognized in AHCI mode

  When I set the SATA to AHCI - Mode controller Mode. Doesn´t BIOS find the DVD more. I have also flashed the new Bios, but failure still exist.

  Can someone help me?

  Hi franckymaus,

  What model of laptop you have exactly?

• NB 100, can't enable AHCI mode. Official driver will not install. help please!

  Hello

  Is someone can you please tell me how can I activate the AHCI mode after you have reinstalled Windows XP Pro on the NB 100? I try to install the official "Storage Manager drivers" but windows tells me that the machine does not meet the requirements.

  Help, please

  Yes, you can install the AHCI drivers * after * installation of XP in Compatibility Mode.

  Directions for use:
  http://support.Microsoft.com/KB/314082/en-us

• Can Equium L40 - I change hard drive SATA to AHCI Mode?

  Hello

  Anyone know if it is possible to change the hard drive to SATA AHCI (or same IDE) mode in the BIOS?

  I see the hard drive in the BIOS but I can't select to make changes as long as it is "gray".

  I installed the latest version of the BIOS, but that made no difference.
  Thank you very much.

  I put t have this model of laptop, but usually the controller SATA in BIOS mode options are AHCI or compatibility.
  I presume that it is set to AHCI.

  Your laptop's SATA HDD so I put t understand why you want to change anything. Using the AHCI mode HARD drive can operate at full speed.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• Why the AHCI mode is disabled in some models of Satellite P200/205?

  Hello.

  My laptop model is Toshiba Satellite P205-S6277 (PSPBGU-00W016B). Chipset Intel 945 PM Express, Intel 82801 GBM (ICH7-M).

  According to the information of the intel.com my laptop processor / chipset are fully compatible with the AHCI mode. But my SATA controller works in IDE compatibility mode and there is no way to enable AHCI SATA mode in the BIOS.

  So I have two questions correlated.

  1. why this AHCI mode is completely disabled by the BIOS? Is it possible to activate this mode in future versions of BIOS?

  2 If this mode is completely disabled by the BIOS in the models of laptop of all PSPBG and PSPB0 then why Intel Matrix Storage Manager (driver that improves the functionality of the AHCI mode) is available at downloads driver recommended for these series of laptop on sites European Canadians, Toshiba and even specially for my Toshiba laptop model on the site?

  I already posted the same question to the site we Toshiba but unanswered for a month.
  Maybe there is someone who is able to answer this question?

  >.. There is no way to enable AHCI SATA mode in the BIOS.
  How you tried to activate it exactly?
  I have Satellite P200 and the two modes are available. I have model laptop but can not imagine that the AMERICAN models, or models even Canadian work on a different path and BIOS must be the same.

  Toshiba service best place where you should ask for help. Call them and ask for explanations. If you are right and the AHCI mode is unavailable, they know why.
  Over the past 3 years I have worked with 4 different laptop models and all have absolutely identical SATA settings.

• Pavilion 15 p204tx: activate the AHCI Mode

  I want to replace the existing hard drive in my laptop with an SSD. While reserching on this subject, I learned that I need to change the SATA Mode from IDE to AHCI Mode. I tried to find this setting in my BIOS, but I wasn't able to find it. I would be grateful if you could help me with this.
  Thank you!

  Hello:

  The drive of your laptop is already set to AHCI in the factory and cannot be changed in the BIOS.

• Satellite L350 - compatibility vs AHCI mode

  I installed XP mode dual boot with Vista pre-installed on a Satellite L350-20J.

  Since I couldn't find the files needed for the process of F6 in the Matrix Storage Manager (in the section driver Toshiba L350 for XP, you get an EXE file) to use during the installation of xp in the BIOS, I changed the SATA AHCI setting in compatibility. The installation went well.

  Once XP has been installed, when I tried to run the Matrix Storage Manager driver, I got the message "this computer does not meet the minimum requirements for installing the software. However, the chipset utility has been installed without a hitch.

  When I went back the setting of "compatibility" to AHCI in the BIOS, it may that the system does not start properly. It would direct me to screen multiple choice for safe mode, etc.

  How can I get SATA mode at this point?

  You can't do that. If you switch to AHCI mode, you must reinstall WXP.
  Simple switch will not work.

  I tested it on my Satellite A300. I installed Windows XP Home edition in compatibility mode. With AHCI mode, I got blue screen every time when I tried to start Windows XP Home edition.