AIP-SSM-10 update

Similar Questions

• Cisco ASA aip - ssm signature update

  Hello

  Is it possible to dynamically update the signatures directly from Cisco IPS? I can only find configuration guides where the IPS module queries an internal server...?

  Thank you

  Ash

  Yes, you can update IPS signature directly from cisco.com if you run IPS version 6.1 and higher.

  This is the configuration for your reference doc:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/IDM/idm_sensor_management.html#wp2182927

• Updated AIP-SSM-10 on ASA 5510

  Hello

  I want to upgrade the IPS module in an ASA 5510, and I have a few questions. The AIP - SSM is running E3 479.0 1.0000 and I have a valid account of the ORC etc for this.

  1. What is the version of the software on the question of the ASA?
  2. When I look in the software downloads< ips="" there="" are="" .pkg="" and="" .img="" files.="" i="" want="" to="" upgrade="" to="" 6.3(3)e4.="" do="" i="" have="" to="" re-image="" the="" ips="">
  3. AFAIK redefinition to wipe the device so I just reload the config after, right?
  4. I guess I can apply any update after going to E4?
  5. Can you give me links for this upgrade?

  see you soon

  Let me give some clarification on a few points:

  2. There is no need to recreate the image on the device using the .img file.  You can improve the mechanism of maintenance of your existing configuration using the .pkg file.  It is the recommended method for upgrading to Cisco IPS devices/modules.  The .img file to recreate the image should only be used to restore the default device.

  5 here are links for the upgrade of the probe using a .pkg file.  For updates through the IDM user interface:

  http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/IDM/idm_sensor_management.html#wp2126670

  For upgrades via the CLI:

  http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/CLI/cli_system_images.html#wp1142504

  Another point of clarification; current releases of IPS software supported on the AIP-SSM-10 are (taking into account you are currently running 6.2 (1) E3):

  6.2 (3) E4

  7.0 (4) E4

  You can go directly to each output.

  Scott

• Automatic update AIP-SSM-10 and ASA 5510 (Beginner)

  I see that it is possible to automate the updates of the ASA 5510 and AIP SSM via FTP on my own server. Is it possible to automate the download directly from Cisco.com?

  Thank you!

  Jeremy

  Jeremy, the answer to your question is correct, as far as the Cisco products are concerned. So I wrote a PERL app that does exactly that, and I published an article about it in the June 2007 issue of Sys Admin magazine. Here's the article online: http://www.samag.com/documents/s=10128/sam0706a/0706a.htm

  And it is also on my site, with a tar of scripts to:

  http://www.LHB-consulting.com/pages/apps/index.html

  Good luck.

  -Lisa

• installation of update of signature for JOINT-2 AIP - SSM

  Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you

  There are 3 main types of Signature updates.

  (1) IPS sensor Signature Update

  (2) updates of Signature CSM for IPS sensors

  (3) signing IOS IPS updates

  The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg

  That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.

  Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.

  If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.

  The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.

  The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.

  These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.

  So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.

  The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.

  With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.

  NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.

• AIP - SSM, failure to update the cisco Web site

  Hi all

  I want to know the reason why my AIP - SSM fails to update its signatures automatically from cisco website. I put the module do cisco automatic signature update, but it doesn't matter when he tries to update, it displays an error message that reads "= error: exception Autoupdate: HTTP failed to connect (1 111) ' find the exact error message attached. The interface of my AIP - SSM is behind the proxy of the company and I put the proxy to allow Module AIP - SSM establish a connection to the internet.  What could be wrong?

  Your help will be very appreciated.

  Concerning

  Automatic update to the signature of the IPS is not supported through proxy server.

  The configuration of the proxy server on the IPS is only for the overall correlation.

  You must allow direct access for the automatic update of signature to IPS.

• AIP - SSM 10 Signature Update license?

  Hi every one.we had an AIP - SSM 10 for our asa5520.actually it is bundle asa5520 + AIP-SSM10. (part number ASA5520-AIP10-K9 =)

  (1) I want to know that if we want to improve our signature aip - ssm we get the Services Cisco IPS download signatures or not with this number of pürt we get it too!

  (2) in the case and we must get the Cisco IPS services separately so where can I find a reference number for the services of this?

  (3) what license that must be installed on the sensor activation? If we get the Cisco Services for FPS then we receive license activation for installation on sensor too? or not if not, can we install signatures on a sensor that it has not been activated yet? guess we can get a few signatures how! (I know JOINT-2 we cannot install any license until the license is installed on the sensor.) Thank you

  CON-SU1-AS2A10K9 would be the correct contract to put all the pieces of the boot under the maintenance contract.

  CON-SU1-ASIP10K9, this is what is used when the AIP-SSM-10 are purchased as spare.

  I don't know if yes or no this Service Cisco IPS contract can be used to cover only the AIP-SSM-10 if it was purchased as part of a package instead of a spare part. You will need to ask your reseller or Cisco sales representative.

• Signature update version: AIP - SSM GUI

  How can I see the latest version of signature on AIP - SSM via GUI. CLI I see on 'Show version' output.

  Thank you.

  You can see through the monitor tab. The exact location is:

  Monitoring > support information > information system

  You can also view this information in IME.

  Please rate if useful.

  Concerning

  Farrukh

• AIP - SSM 40-level question.

  Hello

  I am trying to upgrade the AIP - SSM software file 'IPS - K9 - 6.0 - 6 - E4' in 'IPS-engine-E4-req-7.0-2 '. But it is not allow.

  "Could not pass the software on the sensor.

  Level the current signature is S698. The current level of the signature must be less than S480 for this installation package. »

  So I tried to update the signature file less than S480, "IPS-GIS-S460-req-E3".

  "Can not upgrade the sensor software be"
  This update can be installed on the sensor with and the version of the 3 engine.

  The currently installed engine version is 4.

  There is no signature file in cisco downloads less S480 in version 4 engine.

  See the version

  AIP - SSM # sho version

  Application partition:

  Cisco Intrusion Prevention System, Version 6,0000 E4

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S698.0 2013-02-19

  OS version: 2.4.30 - IDS-smp-bigphys

  Platform: ASA-SSM-40

  Serial number:

  License expires: November 3, 2013 UTC

  Sensor time is 3 days.

  Using 4203216896 bytes of available memory (24% of use) 1045143552

  application data using 41.4 M off 167.8 M bytes of disk space available (26% of use)

  startup is using 37.8 M off 70.5 M bytes of disk space available (57% of use)

  MainApp N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500 Running

  AnalysisEngine NO-NUBRA_E4_2010_MAR_24_22_44_6_0_6 (Ipsbuild) 2010-03 - 24 T 22: 47:53 - 0500 Running

  CLI N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500

  Upgrade history:

  * IPS - K9 - 6.0 - 6 - E4 21:14:06 UTC Wednesday, March 24, 2010

  IPS-GIS-S698-req - E4.pkg 15:44:43 UTC Sunday, February 24, 2013

  Version 1.1 - 6, 0000 E4 recovery partition

  ____________________________________________________________________________

  Any help will be much appreciated... Thanks in advance.

  Liénard

  If you try the software version Upgrade, try to use the IPS-K9-7, 0-2 - E4.pkg instead of the engine update package.

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• AIP-SSM-20 upgrade

  Try to upgrade an AIP-SSM-20.

  We have 2 ASA in a failover configuration, upgrade on the AIP-SSM-20 secondary has been a success.

  On the primary AIP-SSM-20, we get the following error when you try to upgrade via FTP from the same server that we have updated the secondary SSM module of:

  execUpgradeSoftware: permission denied

  The current version is 1,0000 E1, tyring 4,0000 E1 upgrade

  We tried when the module is active and when it's not... same error in both directions. Doesn't seem to be a user FTP error since we get a different when error deliberately hits the user or password.

  Our SSM user has administrator privileges (cisco default user) and we tried to restart the SSM... no luck

  Anyone has any idea on this?

  Thank you

  John Stemke

  I don't know if the error is generated by the sensor itself, or from the ftp server.

  To discover the try running a sniffer of packages on the ftp server or the 'package' command on the CLI for the command of the probe and control interface.

  Run the command to upgrade and see if a ftp connection is still attempted by the sensor.

  If no ftp connection is attempted, then the error would be to the sensor itself, and it would seem that the user doesn't have permissions admin (which doesn't seem to be your case by what you wrote).

  If the ftp connection is attempted, then the error is probably coming from the ftp server. Look at the packages that you have captured and see if an error is coming from the ftp server. The problem may be a permissions issue on the file on the ftp server. The ftp directory or the file itself may not have read permission for the file.

  You can also try a ftp from your own desktop to the same ftp server by using the same user and password used for the sensor and see if you can download it on your own desktop.

  As a work around to get your updated sensor to update and work on this authorization the problem is later to copy the upgrade on your desktop.

  Run IDM and use IDM to repel the upgrade of your desktop directly on the sensor.

• CSM up-to-date IPS AIP - SSM

  Hi all

  I need help. I'm setting up my 3.1 CSM to apply the update on my IPS AIP - SSM.

  I went to the FPS tab apply and choose Update cisco.com. But it's still as treatment for a long time.

  I tried to enter my username and password for the sensors or account of the BCC but still no improvement. Anyone know how to configure it. I tried to read the user guide there is no examples.

  Thank you

  The two IPS - K9 - 5.1 - 8.pkg abd IPS-SSM_10-K9-sys-1.1-a-5.1-8-E3.img will recreate the image on the partition recovery and the application partition.

  The System Image will erase everything before starting the imaging process.

  The Service Pack Upgrade file will first of all take the current configuration and convert it to work with the new version and save off the coast. Also several other special folders on the sensor (for example, the license file) will be saved off the coast. The imaging process will run and then the saved to the large files will be automatically applied to the probe.

• AIP-SSM-10 upgrade question

  I have an AIP-SSM-10 (IPS - K9 - 6.0 - 5 - E2) running inside an ASA (active failover mode / standby). I tried to put a signature update today (version S447, first time) and he said I need engine lvl 3 to update the signature and I am currently at lvl 2.

  Here's my question, what are the versions can I go to? I'm stuck with the versions of level 2 of the engine when using the AIP - SSM or can I put on until the next major release of 2.0000 E3. And is it really a good idea or not. What would you suggest?

  Also, I guess I would need to install the release .pkg file. Is this good?

  Thanks in advance!

  You can switch to the 5,0000 E3, 6,0000 E3 or one of the E3 7.0 images (x). You want the .pkg file.

  Mount the sensor in the CLI:

  conf t

  Update ftp://user:password@/ upgradefilename.pkg

  When the sensor complaines on the upgrade, just say 'yes' to go ahead in any case. This is a known bug, do not believe that the CLI.

• The AIP - SSM to unused ASA connection interface

  Hi people,

  Perhaps, someone has already raised this issue, but I was unable to find anything relevant. We have an ASA with an unused interface (gig0/3). The sensor of the AIP - SSM is physically connected to this interface with the following IP settings:

  Sensor (192.168.2.2/30,192.168.2.1)---interface ASA (192.168.2.1/30)

  It's basically point to point connectivity, and I can reach the ASA of the sensor and the other way around.

  This design is dictated by the lack of a free port on the switch.

  Technically, it should work without any problems, but I can't seem to be able to reach the sensor. There is a switch between my PC and the sensor and the switch has the corresponding static route added. I can reach the switch sensor.

  Is there a security feature hidden I don't know that prevent communication with the sensor.

  And ACL of the sensor allows the traffic to all networks (0.0.0.0/0)

  With the sensor acl set to 0.0.0.0/0, the sensor must be allowing connectivity.

  You can use the 'View of package' command on the sensor to look at packets on the interface command and control to see if the packets are what makes the sensor.

  You say that you have a static route on your switch for the switch reach your sensor. Do you know if your PC is configured to use the switch as the computer's default router. If the PC is to use a different default router, then the other router should also the static route.

  The other possibility is that the SAA itself can be deny traffic.

  Since this is an ASA connected to the MSS interface, the traffic must be routed through the ASA. Standard firewall rules apply to this traffic. The security level of the interfaces can prevent traffic, and an ACL may be necessary in order to allow the circulation of your PC be routed to the SSM.

  NOTE: If you don't want to have to worry about roads, the other alternative is to make the network between the ASA and SSM to be an isolated network that only 2 machines know.

  You can then use PAT static to map a port on the inside of the ASA interface with the address of the SSM 443 https port and map a second port of the SAA within the interfaces to the address of the SSM SSH port.

  How your home PC would simply plug the ASA IP using these specific ports and the ASA would do the translation of port and transmit on the MSS.

  The SSM address could also be dynamically PAT would have on the SAA within the address, so SSM could start the connection to other machines on the inside network.

  Another alternative if you have addresses available on your inside network IP is to use static NAT instead of PAT. And just go forward and has the ASA statically map an IP network on IP of the SSM on the network that only the ASA and the SSM inside could know.

  In both cases the network between the ASA and SSM would not routable at, and you wouldn't have to worry of reproducing static routes anywhere.

  SIDE NOTE: A separate network for the SSM you Becase you will also need to NAT or PAT address of the SSM for the ASA to outside interface. In this way the SSM will be able to connect to Internet to download cisco.com auto updates, and/or pull overall correlation of servers cisco information. It's probably the same configuration that you would already other internal addresses, and just to be sure, you cover the SSM since you have it on a separate subnet.

• AIP - SSM upgrade procedure

  Hello world!

  I have version 8.2 ASA5520 (1) with module AIP-SSM-20

  and I want to put AIP-SSM-20 software version 3,0000 E3 to E4 2.0000

  I go to the download site and see the following list:

  Intrusion Prevention System (IPS) recovery software:

  • IPS-K9-r-1.1-a-7.0-2-E4.pkg

  Release date: March 29, 2010

  IPS Recovery Image File

  Intrusion Prevention System (IPS) Signature Update:

  • IPS-GIS-S481-req - E4.pkg

  Release date: March 31, 2010

  E4 Signature Update S481

  Intrusion Prevention System (IPS) system software:

  • IPS-SSM_20-K9-sys-1.1-a-7.0-2-E4.img

  Release date: March 29, 2010

  Image system IPS-SSM_20 file

  Improved Intrusion Prevention System (IPS) systems

  • IPS-K9-7, 0-2 - E4.pkg

  Release date: March 29, 2010

  File upgrade 7.0 Major of IPS (all supported except AIM - IPS and NME - IPS platforms)

  • IPS-engine-E4-req-7.0-2.pkg

  Release date: March 29, 2010

  The IPS E4 engine update

  I'm a little confused by the number of files and you want to ask what the procedure/sequence I should follow to upgrade?

  This is the file that you want to use to upgrade:

  Improved Intrusion Prevention System (IPS) systems

  IPS-K9-7, 0-2 - E4.pkg

  Upgrade:

  (1) download the file 'IPS-K9-7, 0-2 - E4.pkg' through IDM

  (2) IDM--> Configuration--> sensor--> sensor update management--> choose update is located on the client--> choose file 'IPS-K9-7, 0-2 - E4.pkg'--> hit the button "Update".

  It will take some time (about 20 minutes) to upgrade the sensor, so don't panic if it does not return to the top 'UP' status immediately.

  Hope that helps.