CSM up-to-date IPS AIP - SSM

Similar Questions

• IPS (AIP - SSM) ASA5520 module

  My ASA is 7.2 2 & ASDM is 5.2 (2).

  Fix version 5.0.2 of v6.1.1 IPS module.

  What version of ASA/AMPS should I fully support the IPS 6.1?

  Just go through this process.

  ASDM 6.0 (3)

  ASA 8.0 (3)

• The ACE IPS Cisco and Cisco ASA AIP - SSM (IPS)

  Is there a difference between the features offered by the Cisco ACE IPS and Cisco ASA AIP - SSM (IPS) devices?

  Can we do without Cisco ASA AIP - SSM (IPS) of 'only' configuration/implementation Cisco ACE IPS.

  Cisco AVS/ACE emphasis on commissioning and to secure web-based applications. IP addresses do not focus on just the web applications and trying to get the multiple layers of the OSI stack. Consider the IPS as a general practitioner and the ACE/AVS as an eye surgeon, or something :)

  Here is the response from Cisco itself:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps6906/prod_qas0900aecd8045867c_ps6492_Products_Q_and_A_Item.html

  Q: how is Cisco AVS Firewall application differs from an intrusion prevention system (IPS)?

  A. IPSs are solid solutions of protection against targeted attacks of known vulnerabilities in major platforms such as Windows, Solaris, Apache or Microsoft Internet Information Services (IIS). Cisco AVS excels to protect against targeted attacks Web sites or enterprise applications. These applications can be built custom internal applications or software vendor. Signatures and security patches are generally not available for these types of applications, and building these security levels in each application, it would be almost impossible.

  Q: how is Cisco AVS Firewall application differs by a network firewall?

  A. The Cisco AVS 3120 and Firewall network such as the Firewall of Cisco PIX® and Cisco ASA 5500 Series Adaptive Security appliances are complementary products. The application Cisco AVS Firewall secures Web applications; excellent network in the network security firewall. and the Cisco AVS provides defense in depth for Web applications.

  Firewall network apply policy networks, IP addresses and ports; they have a wide range of application for many different protocols layer features. The firewall can and will be deployed in many locations, including the edge, edge of the enterprise network, branch, etc. Cisco AVS imposed the policy on data HTTP as URL, headers and parameters. Cisco AVS is deployed in the data center in front of Web applications

  Concerning

  Farrukh

• Downgrade IPS on AIP - SSM to 6.1.1 6.0.2

  Need to know how to return to v602 once a v611 upgrade was carried out.

  The recovery partition is also v611.

  Two methods as well as a comment. The comment is that you will want to come back to 6.0 (4), not 6.0 (2) for operational use.

  [edit] The following works of generically on autonomous sensors... I missed that this is a question for the AIP - SSM. It should still work on the AIP - SSM with adjustments for the input/output "foreigner in the area.

  To recover, a reimage using one of the tftp-able images (or a CD boot if you have a sensor 4235/4250) is the gold standard to go backward. You will lose your configuration when do you and you need to re-run the installation program.

  The other way and officially it is not supported for "damages", but it works 98% of the time, is to load the recovery image - r (IPS-K9-r-1.1-a-6.0-4-E1.pkg) and then make an application partition 'recover' the level of the "conf t". This reimage your sensor and preserve the installation of the base system. You will still lose the customizations of signature and passwords will be reset to factory default, but the network configuration is preserved, so you can do it remotely.

• IPS Signature DataBase - ASA IPS/IOS IPS/IPS 42xx/AIP-SSM

  Hello

  Can someone briefly tell me the details of database signature (number of Signature) among the following devices

  --> ASA IPS/IOS IPS/IPS 42xx/AIP-SSM.

  Thank you

  IPS on ASA/PIX = signatures only 50 or so common

  Module AIP - SSM is same signatures as the Cisco 4200 series sensors. Few minor differences exist (such as signature support IPv6 etc.)

  Please rate if useful.

  Concerning

  Farrukh

• What are different between the IPS and AIP - SSC and AIP - SSM?

  Dear all,

  I'm not clear about the IPS, AIP - SSC and AIP - SSM module which are different?

  Then, when we can use IP addresses?

  When we use the AIP - SSC?

  When we can use AIP - SSM?

  Thus, a different IPS and AIP - SSC and AIP - SSM material or the same material?

  Best regards

  Rechard

  AIP - SSM is an IPS Firewall ASA module.

  IPS is available in different flavors:

  -Device of the IPS 4200 series

  AIP - SSM - module IPS Firewall ASA

  -IDSM2 - IPS module on 6500 series switch

  AIM - IPS - map IPS on router IOS

  Please rate and mark post useful.

• AIP - SSM 40-level question.

  Hello

  I am trying to upgrade the AIP - SSM software file 'IPS - K9 - 6.0 - 6 - E4' in 'IPS-engine-E4-req-7.0-2 '. But it is not allow.

  "Could not pass the software on the sensor.

  Level the current signature is S698. The current level of the signature must be less than S480 for this installation package. »

  So I tried to update the signature file less than S480, "IPS-GIS-S460-req-E3".

  "Can not upgrade the sensor software be"
  This update can be installed on the sensor with and the version of the 3 engine.

  The currently installed engine version is 4.

  There is no signature file in cisco downloads less S480 in version 4 engine.

  See the version

  AIP - SSM # sho version

  Application partition:

  Cisco Intrusion Prevention System, Version 6,0000 E4

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S698.0 2013-02-19

  OS version: 2.4.30 - IDS-smp-bigphys

  Platform: ASA-SSM-40

  Serial number:

  License expires: November 3, 2013 UTC

  Sensor time is 3 days.

  Using 4203216896 bytes of available memory (24% of use) 1045143552

  application data using 41.4 M off 167.8 M bytes of disk space available (26% of use)

  startup is using 37.8 M off 70.5 M bytes of disk space available (57% of use)

  MainApp N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500 Running

  AnalysisEngine NO-NUBRA_E4_2010_MAR_24_22_44_6_0_6 (Ipsbuild) 2010-03 - 24 T 22: 47:53 - 0500 Running

  CLI N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500

  Upgrade history:

  * IPS - K9 - 6.0 - 6 - E4 21:14:06 UTC Wednesday, March 24, 2010

  IPS-GIS-S698-req - E4.pkg 15:44:43 UTC Sunday, February 24, 2013

  Version 1.1 - 6, 0000 E4 recovery partition

  ____________________________________________________________________________

  Any help will be much appreciated... Thanks in advance.

  Liénard

  If you try the software version Upgrade, try to use the IPS-K9-7, 0-2 - E4.pkg instead of the engine update package.

• installation of update of signature for JOINT-2 AIP - SSM

  Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you

  There are 3 main types of Signature updates.

  (1) IPS sensor Signature Update

  (2) updates of Signature CSM for IPS sensors

  (3) signing IOS IPS updates

  The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg

  That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.

  Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.

  If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.

  The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.

  The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.

  These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.

  So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.

  The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.

  With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.

  NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.

• AIP - SSM upgrade procedure

  Hello world!

  I have version 8.2 ASA5520 (1) with module AIP-SSM-20

  and I want to put AIP-SSM-20 software version 3,0000 E3 to E4 2.0000

  I go to the download site and see the following list:

  Intrusion Prevention System (IPS) recovery software:

  • IPS-K9-r-1.1-a-7.0-2-E4.pkg

  Release date: March 29, 2010

  IPS Recovery Image File

  Intrusion Prevention System (IPS) Signature Update:

  • IPS-GIS-S481-req - E4.pkg

  Release date: March 31, 2010

  E4 Signature Update S481

  Intrusion Prevention System (IPS) system software:

  • IPS-SSM_20-K9-sys-1.1-a-7.0-2-E4.img

  Release date: March 29, 2010

  Image system IPS-SSM_20 file

  Improved Intrusion Prevention System (IPS) systems

  • IPS-K9-7, 0-2 - E4.pkg

  Release date: March 29, 2010

  File upgrade 7.0 Major of IPS (all supported except AIM - IPS and NME - IPS platforms)

  • IPS-engine-E4-req-7.0-2.pkg

  Release date: March 29, 2010

  The IPS E4 engine update

  I'm a little confused by the number of files and you want to ask what the procedure/sequence I should follow to upgrade?

  This is the file that you want to use to upgrade:

  Improved Intrusion Prevention System (IPS) systems

  IPS-K9-7, 0-2 - E4.pkg

  Upgrade:

  (1) download the file 'IPS-K9-7, 0-2 - E4.pkg' through IDM

  (2) IDM--> Configuration--> sensor--> sensor update management--> choose update is located on the client--> choose file 'IPS-K9-7, 0-2 - E4.pkg'--> hit the button "Update".

  It will take some time (about 20 minutes) to upgrade the sensor, so don't panic if it does not return to the top 'UP' status immediately.

  Hope that helps.

• Module AIP - SSM hung

  Hello

  I recently confgured my module AIP-SSM-40 in my firewall that is configured in HA(Active/Standby). It was working fine. Then, I upgraded the version of the image to IPS, 2.0000 E3.

  It worked fine for a week. Then I found that the secondary firewall was in a State of secondary failure. My AIP - SSM in the secondary firewall fails.

  I couldn't connect the AIP - SSM with command session 1. Display the order watch module

  Model serial number of map mod
  --- -------------------------------------------- ------------------ -----------
  0 ASA 5520 Adaptive Security Appliance, ASA5520

  1. ASA 5500 Series Security Services Module-40 ASA-SSM-40

  MAC mod Fw Sw Version Version Version Hw address range
  --- --------------------------------- ------------ ------------ ---------------
  0 0021.a09a.d1bb for 0021.a09a.d1bf 2.0 1.0 (11) 5 8.0 (4)
  1 0023.5e15.f6c8 to 0023.5e15.f6c8 1.0 1.0 (14) 5

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------

  Data on the State of mod aircraft compatibility status
  --- ------------------ --------------------- -------------
  0 to Sys does not apply
  1 does not not Applicable

  at the end of the failover see command shows

  Slot 1: ASA-SSM-40 rev hw/sw (1.0 /) status (does not/high)

  I suspect module SSM is having the problem. Is it possible to recover.

  Try to stop and reset the module using this command from the ASA:

  HW-module module 1 reset

• AIP - SSM in cluster

  Hello

  We have a failover cluster ASA, with 2 IPS, each in an ASA AIP - SSM. There is a way of module config mode cluster as ASA IPS, or have a configuration that is mirrored between them?

  Thank you very much.
  Better with respect to Antonello.

  Antonello;

  Configuration mirroring between the AIP-SSMs is not currently available.  You can emulate this process by copying the current configuration of the AIP - SSM active to a FTP server, change the configuration to remove the specific details of the host (IP address, etc) and then copy this configuration on the stand by AIP - SSM.

  Another option would be to invest in Cisco Security Manager (CSM) and create a shared strategy that is applied to the two AIP - SSM.

  Scott

• Updated AIP-SSM-10 on ASA 5510

  Hello

  I want to upgrade the IPS module in an ASA 5510, and I have a few questions. The AIP - SSM is running E3 479.0 1.0000 and I have a valid account of the ORC etc for this.

  1. What is the version of the software on the question of the ASA?
  2. When I look in the software downloads< ips="" there="" are="" .pkg="" and="" .img="" files.="" i="" want="" to="" upgrade="" to="" 6.3(3)e4.="" do="" i="" have="" to="" re-image="" the="" ips="">
  3. AFAIK redefinition to wipe the device so I just reload the config after, right?
  4. I guess I can apply any update after going to E4?
  5. Can you give me links for this upgrade?

  see you soon

  Let me give some clarification on a few points:

  2. There is no need to recreate the image on the device using the .img file.  You can improve the mechanism of maintenance of your existing configuration using the .pkg file.  It is the recommended method for upgrading to Cisco IPS devices/modules.  The .img file to recreate the image should only be used to restore the default device.

  5 here are links for the upgrade of the probe using a .pkg file.  For updates through the IDM user interface:

  http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/IDM/idm_sensor_management.html#wp2126670

  For upgrades via the CLI:

  http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/CLI/cli_system_images.html#wp1142504

  Another point of clarification; current releases of IPS software supported on the AIP-SSM-10 are (taking into account you are currently running 6.2 (1) E3):

  6.2 (3) E4

  7.0 (4) E4

  You can go directly to each output.

  Scott

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• Getting started: ASA5520 w / AIP - SSM

  I'm trying to deploy an ASA5520 to a customer. I have no problem with the piece of implementing firewall, but I don't know where to start with the piece of IPS.

  I searched a bit on the ASA55XX & AIP - SSM, but can't seem to find much on what to do with the AIP - SSM beyond the initial Setup.

  Can someone point me to some beginners IPS documentation that focuses on the AIP - SSM?

  Thank you

  Jeff

  In my view, there is a lack of documentation on how to get the IPS module to work with the ASA. It would be nice if there was a single document on how to get IPS working module with the ASA.

  Start with the documentation of the IPS. It's just on how to configure the IPS himself module. Assign an IP address for management, set the admin password, etc..

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids12/index.htm

  Then go to the documentation of the SAA on how to configure ASA to send traffic to IP addresses (via a service-policy):

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/clissm.htm#wp1033926

  There is a free viewer of IPS Cisco event offering to monitor events on the IPS. It can be downloaded from the download page of the Cisco IPS software.

  Finally, read the whitepaper SAFE on the deployment of the IPS and the setting.

  http://www.Cisco.com/en/us/NetSol/ns340/ns394/ns171/ns128/networking_solutions_white_paper09186a00801bc111.shtml

  I hope this helps. Remember messages useful rate. Thank you!

• Help configuration AIP - SSM

  I have two questions about the AIP - SSM.

  (1) is the ACL in AIP - SSM has any type of relations to the ASA ACL?

  2) our four interfaces are all used. Is it possible to assign the SSM an IP address in the same subnet as the management interface?

  (3) should then the management interface serve as a gateway for the SSM?

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP address 65.x.x.1 255.255.255.0 watch 65.x.x.2

  !

  interface GigabitEthernet0/1

  nameif dmz

  security-level 50

  IP address 172.16.x.1 255.255.255.0 watch 172.16.x.2

  !

  interface GigabitEthernet0/2

  nameif inside

  security-level 100

  IP address 255.255.255.0 192.168.x.1 watch 192.168.x.2

  !

  interface GigabitEthernet0/3

  STATE/LAN failover Interface Description

  !

  interface Management0/0

  Speed 100

  full duplex

  nameif management

  security-level 100

  IP address 10.0.x.1 255.255.255.0 watch 10.0.x.2

  management only

  Here are the answers to your questions-

  (1) is the ACL in AIP - SSM has any type of relations to the ASA ACL?

  No of years) ACL on SSM is completely independent of the ACLs on the ASA.

  2) our four interfaces are all used. Is it possible to assign the SSM an IP address in the same subnet as the management interface?

  VNA) absolutely. You can assign the SSM management port IP address in the same subnet as your managemnet interface. In this way, all management traffic will remain independent of normal DATA traffic.

  (3) should then the management interface serve as a gateway for the SSM?

  VNA) you're right... :-)

  Hope that helps.

  Kind regards

  Maryse.