Air Print and merge Verizon home

Similar Questions

• HP Photosmart Plus B209a-m printer and OF Home Hub 5

  I upgraded to the Bt Home Hub 3 to BT home Hub 5 yesterday and feel the same wireless connection I had with Home Hub 3. The connection to the Home Hub 3 was set by a post on this forum. How can I fix the problem for the Home Hub 5? I use a Mac book air and Yosemite OS.

  I used the WPS on HH5 function and connected to the printer and it market still so it seems that the problem is resolved. However, I saw a post on this forum about a different HP printer with a comment is not to use WPS with HH5.

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• HP Officejet 6500 a: HP Officejet 6500 a and Air Print

  I use HP OfficeJet 6500 has connected to my network.  Works very well.  It is also implemented and works with ePrint via email address.

  Now, I'm trying to get my iPad and iPhone to print via Air Print, but they will not find the printer.  All products are up to date.

  (1) is the printer must be in wireless mode for direct connection to Apple products instead of via the router and not through the wired connection?

  (2) it seems that this 6500 a has any ability to woreless when I unplug the ethernet cable, even if the guide and the sites Internet says that she is supposed to have wireless capability.  No Option in the Network Setup menu to enable or disable wireless.

  Hello

  Must be connected to the same network, as long as it's the network of sae, an ethernet cable should work.

  AirPrint is based on good morning, requiring your router to support the transfer of Multicast packets in order to establish such a link.

  There are routers that does not support multicast or can with this support, disabled by default, the router is most likely the cause of forums,

  If please specify your router brand and model to better understand any possible cause.

  Shlomi

• error 0x000000c1 with a canon lbp 6300dn printer and Vista Home Premium

  I have a Vista Home Premium that I try to install a canon lbp 6300dn printer on a network.  It gives me the error 0x000000c1. I got the correct driver of canon but continue to get this error? can you help me?

  It is an unrecoverable Windows, usually called error message Stop, bug verification, or more commonly the blue screen of death (BSoD).  Not a Setup error.

  You can try to install over the previous installation.

  If you can get the system for more than a few minutes or you can use safe mode, try to delete the last installed application software or driver.
   
  For the withdrawal of an application:
  1. click on start, Panel, then programs and features.
  2 Select the software associated with the printer, and select uninstall.
   
  To uninstall the driver:
  1. go into the Device Manager
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  2. find the printer driver, do a right click Uninstall.
  3. also in the Control Panel, printers, right-click on the printer and click on delete.

  Now try to install your printer with the latest drivers available on the Support site of the manufacturer.
  http://www.USA.Canon.com/Cusa/support

  Your Type of product: consumer Home & Office
  Family of products: Printers & Multifunction
  Series of products: image CLASS series

  See also these:
  Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560183 (v = vs. 85) .aspx

  SPECIAL_POOL_DETECTED_MEMORY...
  STOP: 0X000000C1
  http://www.faultwire.com/solutions-fatal_error/SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION-0x000000C1-* 1194.html? = date order

• Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print my email address

  original title: Debbie

  I have a Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print from my email address. The error I get is as follows:

  An error has occurred in the script on this page.

  Line: 2107

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Please help me.  I called Canon nothing is done.

  In fact, I already did what you said but it doesn't work. There is a conflict between windows explorer 9 and my canon mp640 printer. Microsoft consumer support figured this out for me.  What we have done is to uninstall internet explorer 9 and returned to internet explorer 8 and since that my printer works fine.

• Vista Home Premium 32 will not install new printer and via USB or network drivers

  I just bought a new Canon PIXMA MG5220 wireless printer but I was unable to install the printer on my Vista Home Premium 32-bit laptop. Here are the details of the error:

  Description
  Windows encountered a problem installing the device drivers for your unknown device

  Signature of the problem
  Problem event name: PnPDriverInstallError
  Architecture: x 86
  Win32 error: 00000005
  The INF name: mg5200p3.inf
  Driver Package hash: 7511c00bbed81f76c0cbcad5f6cf20a8cb5494d9
  DDInstall section name: CNM_0374VISTA
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  oem66.inf

  Hello

  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• iPhone on air print work and no ipad

  iPhone on air print work and not the ipad?  any suggestion?

  You mentioned a device works and the other does not. The first thing you want to do is to determine what is different between the two devices. Both are on the same network with success? The other device has already worked, or have been updated recently performed at what caused this?

  To really help I would need details as what model of printer you have, what model of router you have, what version of iOS is installed on your device and what version of each device you have (iphone 4 or 5, ipad, ipad 2, etc.).

• My printer icon disappeared from the printer and fax under xp home page

  The printer is ready but the icon is not available on the printer and Fax page.

  The coil of the printer is not available.

  Hello

  For you help I would be grateful if you could answer the following questions:

  (1) what is the serial number and model of the printer?

  (2) was there any software or hardware changes made on the computer before this problem?

  This problem occurs because the print spooler service is damaged.

  I suggest you follow the steps from the link below and check if it helps;

  You experience problems printing, the printer icons display and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer.

  http://support.Microsoft.com/kb/919750

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• HP laserjet pro M1536dnf wireless configuration in order to use Air printing

  Since I am trying to print from my new Ipad Air, excuse my newbie questions for networking printing!

  What I know so far:

  1. I understand my printer HP laserjet pro M1536dnf is 'not' a WiFi printer.

  2 by HP support and Apple Support web sites, my printer HP laserjet pro M1536dnf is 'Air Print' active. I guess that a certain update must incorporated the Betacam Air Print!

  3. According to the web site of the HP Support, I have currently the latest firmware installed (20130815).

  Note: On my Config report, it shows the status for IPv4 and IPv6 as "network cable unplugged". I have the address IP Show as active.

  3. my home configuration has the internet cable from my modem cable to my router wireless Linkys E3200 via a coaxial cable. Between my router and my computer is connected through the Ethernet cable. My printer HP Laserjet 1536dnf printer is connected to my computer via a USB cable.

  Issues related to the:

  1. go to after I saw and read about on-line, is correct to say "I'll have to change my Ethernet cable from the router to the computer and change it to leave the router to the Ethernet port on the printer?"

  2. do I have to remove the USB from the printer to the computer?

  3. by removing the USB cable between the printer and the computer, how my computer would communicate to the printer to perform a print job? Unless, I suppose, I add another Ethernet cable between the router and the ethernet port on my computer!

  4 other advice, I might have missed?

  @RicharddR

  Thanks for your post on the forums of hp.com. Here are answers to your specific questions:

  1. you must have all your devices on the same cable modem network: computer, printer, mobile devices. Looks like your Setup is similar to mine. I have mine with the modem installation cable to my Cisco router that broadcast wireless signal. Then I have my devices on this router (computer, printer, mobile devices).

  2. If you use Airprint, you put your printer on a network or wireless. Since your printer is a model of dnf (D - duplex, n = network, f = fax), you must use a network cable and add it to your router. AirPrint is not supported via the USB port.

  3. If you remove the USB cable between the printer and the computer, you need to add your computer to the same network as your added to the printer. You can either do this via the ethernet cable or wireless depending on the capacities of the router and the computer. The important thing is that all the devices are on the same network.

  4. for other tips: make sure everything (computer, printer, router, mobile devices, etc.) are on the same network, otherwise you will not be able to print or have communication problems such as print jobs do not print.

  Good luck.

• Fill out and return to zero problems with Deskjet 3052 has printer and cartridge 61xl black

  Yesterday, my new 61xl OEM black cartridge ran out of ink. I had it only for a few weeks, but this cartridge made of course go fast (faster than the startup cartridges, I swear!). This is a printer at home that is used only by me for personal use.  I wonder how much ink was in it when I bought it. Of course, they don't disclose the ml on the packaging more... how convenient for them, huh?

  In any case, I decided to fill up again. It was my first attempt for this printer and a total failure. I did some research. I used 2 other cartridges to fool the technology of memory without result. Online instructions for which parts of contact on the Strip are either nonexistent for this cartridge or are as clear as mud so I couldn't try it again... This is where it would have been a picture is worth a thousand words.

  It would be a very good alignment page printing. So I think it was successful. But when I tried to print or copy something, it would print the upper part and act like it ran out of ink down. The same thing with trying to clean the print heads. He will start the black stripe and stop about two thirds of the way through. There was less black to have with each successive cleaning, I've tried. If I started on the first cleaning would have the same generous amount of black ink, but decrease as before. I was losing the ink in my brand new color cartridge so I stop messing with it.

  I received errors to gogo (not OEM! False! The sky is falling!). The ink is obviously coming out of the cartridge, so it's not the problem. All I know is that I have a good full of the same black refill ink oem cartridge that I use in HP cartridges for years.

  I don't really like what is happening to this piece of crap cheapo printer so I am not interested to hear how HP has my best interests at heart. What about someone gullible. If I mess up with cheapo ink, then what? And counterfeiting BS is a bogus excuse too.

  Yesterday I had to go out and buy a new cartridge. So today, I found a printer as I used to have (1315) for $20 on Craig's list. Heck, I have tons of cartridges 56, 57 and 58 for this baby and you can charge for this printer throughout the day. I not picking that up next week but then if someone knows how to bypass attempts to be GREEN with this printer and cartridges, of course I understand the help. Maybe who contacts on tape cartridge? Or the head of which HP exec throw this printer to? I'm open to suggestions. Otherwise, the next cartridge runs out in this waste of time and money, it just goes straight to a landfill where it belongs so it won't be wasting someone else's time or money. Thank you!

  It seems that you have introduced an air bubble in the cartridge drain pipe, resulting in starvation of ink you print.

  Pageyield of HP's site lists the 61xl 8.5 ml cartridge.

• Yahoo mail and other small sites print and can not adjust. This is not true with the Explorer

  When I open my yahoo home page printing is of normal size and can be adjusted. In yahoo mail, printing is tiny and I can't fix. Some websites in my favorites also opens in the small print and cannot be adjusted. If I use explore I have none of these problems. I have tried everything I can think and not luck.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• Satellite C660-10 d - get my old printer and scanner to work

  I would like to ask advice on how to get my HP 1020 Laserprinter and HP G2710 Scanner to work with my Toshiba Satellite C660 Windows 7 (Home Premium) 64-bit respectively?

  The software of the printer (pilot) is not installed correctly while the Scanner does not charge same atal. I hope that it is ethical to mention other products on the forum of the society. Otherwise, my apologies.

  Hello

  I put t think that the problem is related to Toshiba

  If your printer and scanner are old enough, I could imagine you don t get the drivers for Windows 7. You should check this page: P directly if the Windows 7 drivers are available or not.

  If Yes, download and install it, it s the same as on other laptops and computers. If no driver available devices are not compatible with Windows 7.

• Can I connect a printer with a verizon 4G mobile hot spot

  I currently travel extensively and before buying a printer, I would like to know if it is possible to support a printer through my Verizon 4 G mobile hot spot?  My other devices, including an HP laptop work fine, including an IPAD 2.  If it is possible, what model x should be?

  dpinmsue,

  If you travel and take the hotspot and the printer with you, I would probably recommend the HP Photosmart D110a or the HP Photosmart Plus B210a just because these are two of the smaller printers ePrint capable so that they are the most suitable for travel.

  Just to remind, however, the hotspot technology is very new in retrospect. Although we have seen some success, so it is difficult to say that you will see success with all the hot spots in general.

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!