Airport access off-grid

Similar Questions

• Airport access point

  I am more able to manage my Airport base station. Airport utility, I first got error "device not found" even after rebooting several times. I now have more see my Base Station in Airport utility after soft/hard resets. However, I still internet access and have a green light. Curiously, I can access the Base Station manually by going to configure others. Any ideas?

  Hmm, looks like a ration of this pass here today.

  What do you use to access your AirPort base station? Mac, PC, or an iOS device & which version of the operating system they are running? If you have multiple devices all have the same problem?

  You did it of updates of the firmware or software recently and this has started to happen?

• The extreme inputing airport access codes

  I intend using Airport Extreme in conjunction with an amplifier of Rogue Wave WI - FI. Hot spots that provide a signal often provide an access code. How would that enter the airport?

  The way it comes to your question, it seems that if you plan to have AirPort Extreme connect to a signal provided by another router Wireless / WiFi amplifier.  Is this correct?

  If this is not the case, what exactly will connect what and how the features of connect?   Wireless?  Wired Ethernet connection?

• LaserJet MFP M477fdw Pro: LaserJet Pro M477fdw MFP - cannot sweep off-grid PC

  Oh please can anyone help? Spent 3 hours on the phone today, a refund 2 with tech, the rest of the post sales and pre-sales who was supposed to be calling me back with a list of printers that can do what I need, but all first does not, so I called again and she promised that she would appeal before s/n and still did not! Massively unproductive day. OK rant over.

  So I bought the above and it does everything I need IF I want to rise to the printer and scanner as a pdf for printing. My old 8600 OfficeJetPro I stood there, chosen analysis, it would be as if scanning to PC / Email. / USB / Fax etc. I would say PC and scanned and sent to my PC folder on dropbox and open the pdf file automatically.

  The LaserJet printer seems no analysis like that, unless it is connected to a network folder, which tech was able to put in place. He wants only to use Windows fax and scan, which is a JPEG - no good for me.

  It may not really be so complicated and I'm sure it's possible. I tried uninstalling etc and all the drivers on the HP site but nothing worked.

  Can someone help me?

  Glenda

  Hi Glenda,

  HP Laserjet printers don't offer direct scanning to a computer like HP inkjet supply, scan to a computer can only be done by HP itself scanning software and not by the front panel of the printer.

  You can find the manual to the user below, any method of scan supported is listed (see Scan page v):

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04636804-2.PDF

  You can go the HP from your PC only software from the Control Panel before you can only scan to a USB Flash drive, a shared network folder, a mail server, two emails or folder scan network are available for network connected device.

  Kind regards

  Shlomi

• HP laserjet 1102w windows 7 64 bit - off-grid each time the pc is restarted (wireless connection)

  Implements a thin using the chip to install, but when the pc is restarted the pc does not recognize the printer and the only solution seems to be to reinstall the software. I tried all the solutions proposed on the pages of HP support without success. Software, firmware and antivirus are all updated.

  Help.

  Hi, how did you set up IP address - static or dynamic?

• HP Officejet Pro 8600 more striking HP off-grid

  Hello

  I'm having a problem that when I turn on my Officejet 8600 connected wireless to my home network, it will hit my computer offline.  I'm running a mini-tower HP Compaq 8200 Elite with Windows 7. Both the minitower and printer were connected to the same network for about 1 year, and this issue has been present since they were connected, but occurred very irregular so I didn't bother. Now, it seems to be the case with more and more often?

  Recently, I added my daughter Lenovo connect wirelessly with my HP printer.

  Any suggestions on how to fix this?

  Thank you

  Mark

  Hi Mark,

  This is the document of the wireless installation:

  http://support.HP.com/us-en/document/c02886889

  Before you start the document, if reset you the settings for network printers would be useful.

  Touch the wireless icon

  Press the settings button

  Scroll down and press the default network

  Please let me know how it goes.

• I fired my off-grid vCenter Server

  Hello everyone,

  I have a 5.1 vcenter server running as a virtual machine (win2k8R2). We have all the virtual machines on distributed switch. I had to upgrade the vnic on vcenter server vm to VMXNET3 E1000. I made a mistake by deleting the existing network card before you add the new network adapter. Now I'm not able to make the VM vcenter on the network. The NETWORK card I added is disconnected and does not see any portgroup who select us in the menu to the bottom to choose the network for the VM.

  I think it's because VDS is managed by vcenter himself and vcenter being out of the network, it does not show the exchanges on VDS that I can connect to.

  All I can think is that I'll have to add a new network adapter on the host and create a VSS and vcenter vm it first add and transfer it to service VDS. But I have no network card now. It is in production

  Suggestions how to add vcenter to VDS?

  Thanks - AG

  Add a NIC temporarily and created a VSS with VM network. Low-pressure vCenter to VSS and then in the properties of the VM, replaced by NIC vDS.

  Thank you all.

• Remove the buttons off grid

  I'm just starting to learn Photoshop. I work with the CS3 version.  I made two styles of buttons with Photoshop. The buttons are on the checkerboard background Photoshop. Saved as .jpg files. I would like to know how to do the buttons on the bottom of checkerboard Photoshop? If I put the buttons like .jpg image files. I want to used the same vertically-positioned buttons. Seven times on the bottom. I have in my HTML file. I'll do the bearings of buttons using Javascript.

  If you don't want white or a checkerboard in the background then you shouldn't save in JPG format. JPG is not a transparent image format. You must save in PNG24, GIF or PNG8 to preserve transparency.

  The checkerboard is only an indicator of transparency. The checkerboard is never saved in the file.

• process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

  I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

  Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

  

  We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

  Turning off the Time Capsule

  Wait a few seconds

  Put in the Time Capsule market and let it run a full minute

  Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

  On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

  Just below this list, click on AirPort Express

  

  Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

  

  In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

  Click Next

  Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

  

  When you see the message Setup is complete, click done. Close the installation window, and you're done.

• Network Concentrator VPN access.

  We have a 3000 Concentrator and is configured with a remote vpn on it. All inside network is allowed once a connceted to the vpn user. It is quite behind firewalls. I can access an external IP.

  But I can't log in to the vpn from the inside network. I can ping the public interface; but when I try to log in from the client, the server report displays no records to my IP.

  Why can't I connect from the inside?

  Thank you

  = Internal network = Concentrator VPN = FW = off-grid

  Why try you to VPN from the inside? The purpose of the VPN is to encrypt the traffic between your PC over the internet to the VPN concentrator, once traffic arrives to your VPN concentrator, it is decrypted, and he'll be in the clear to your internal network.

  So, what's the purpose of attempting to connect from the network Cabinet?

  The reason why it does not work is because of the delivery. You are on the internal network, while traffic will exit to the firewall and return by the same firewall to connect to the public interface of the VPN concentrator, which is why it does not work and if the goal is access to the internal network, you are already inside the network which complicates things as your ip pool must then be routed to the inside.

  Hope that makes sense.

• Airport utility will not install

  When I try to install AirPort Utility on my iMac running OS X El Capitan 10.11.6

  I get the following message;

  AirPort utility cannot be installed to this disk.

  The version of Mac OS X on this volume is not supported.

  could you please help.

  concerning

  Stephen

  OS X El Capitan is already bundled with AirPort Utility v6.x. It seems that you try to install the older v5.x for the utility. Unfortunately, this older version will not install on later versions of OS X.

  If you require administer an older 802.11 g AirPort access point you will need a Mac running OS X Lion or earlier or a Windows XP or 7 PC.

• Extend an AirPort Extreme with a Terminal AirPort Express increasing the number of users?

  I have an AirPort Extreme 2 years ago. Based on the technical page of the product, the router can theoretically connect up to 50 users. That's more than enough if used at home.

  However, I intend to deploy a network of airports in our new office building and we have more or less 50 employees. Because everyone has a smartphone that it needs to connect, I try to at least 100 users/devices. Which includes all the network printers. Obviously, an AirPort Extreme is not enough. Another thing, I have considered is that the office building is 2 floors and all the walls are made of concrete, which means the distribution of the wifi signals is affected.

  I thought to extend an AirPort extreme with 3 more AirPort Expressare (mobile network). It's 2 APs on each floor. That should solve the problem of distribution wifi. I'm not sure the first problem - 100 or more devices into a single network.

  So extending an AirPort Extreme with 3 more AirPort Expressare (making a roaming network with 4 access points) increases the number of potential users of 50 to 200 (assuming that each access point can connect to 50 users)?

  In theory, Yes.  But you must take this specification of 50 users with a grain of salt.  Once there are 20-25 users on the same airport access point, things will slow down significantly. The system will operate as of cold molasses with up to 50 users on the same access point.

  Quite frankly, in a business application, you need a software router. Apple routers are designed for home use.

  Another way to say the same thing, is that Apple does not routers Apple at the Apple Store. Who could tell more than anything whatsoever about the suitability of the products in your proposed network.

  My advice would be to get an IT professional in and review your needs... before you move further.

• How can I reset my password forgotten on model express airport A1409.

  How can I reset my password forgotten on model express airport A1409.

  Not a big deal, but A1409 is not a model number of all AirPort Express. This is the model number for a Time Capsule.

  Please take a look at this user points by expert forum Tesserax.

  Airport - access to forgotten passwords

• Computer won't see airport extreme base station

  I bought a 6th generation Airport Extreme off eBay. Hooked up to the cable modem, but the computer will not see it. Open Airport utility, but it is not the base station.

  Help!

  We need a little more information to understand the best way to proceed at this point.

  Can you please provide the number of the brand and model of the modem?

  Who is your Internet service provider?

  Did you check that the Ethernet cable between the modem and AirPort Extreme works correctly by testing it on another connection?

• How to reset the password forgotten for the Airport express

  I hid says on my airport express and I don't remember the password for it. How to reset the password

  If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.

  AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.

  If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express

  Click Edit in the window that appears

  Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.

  Click Show passwords and you will see your forgotten password

  

  If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.

  Airport - access to forgotten passwords