Network Concentrator VPN access.
We have a 3000 Concentrator and is configured with a remote vpn on it. All inside network is allowed once a connceted to the vpn user. It is quite behind firewalls. I can access an external IP.
But I can't log in to the vpn from the inside network. I can ping the public interface; but when I try to log in from the client, the server report displays no records to my IP.
Why can't I connect from the inside?
Thank you
= Internal network = Concentrator VPN = FW = off-grid
Why try you to VPN from the inside? The purpose of the VPN is to encrypt the traffic between your PC over the internet to the VPN concentrator, once traffic arrives to your VPN concentrator, it is decrypted, and he'll be in the clear to your internal network.
So, what's the purpose of attempting to connect from the network Cabinet?
The reason why it does not work is because of the delivery. You are on the internal network, while traffic will exit to the firewall and return by the same firewall to connect to the public interface of the VPN concentrator, which is why it does not work and if the goal is access to the internal network, you are already inside the network which complicates things as your ip pool must then be routed to the inside.
Hope that makes sense.
Tags: Cisco Security
Similar Questions
-
Access Concentrator VPN GUI?
We have Concentrator VPN 3030 with software version 4.7.2.J. We use to manage graphical interface using HTTPS access. The problem, now, is that we are not in a position of HTTPS (on the private interface) to manage the hub by GUI. However, the device can be telneted to port 443 and is also accessible by telnet. We have also restarted the unit twice.
Is this some sort of BUG or something misconfigured?
Here is some information for you on this issue. I think you have to re - generate the certificate on the hub. HTH
-
ASA5505 can transfer clients to remote VPN access to the local network
I have currently ASA 5505 and 2911-router and I am trying to configure the VPN topology.
Can ASA5505 you transmit to remote VPN access clients LAN operated by another router?
These two cases are possible? :
(1) ASA 5505 and 2911-router are separate WAN interfaces, each connected directly to the ISP. But so can I connect an other interfaces LAN of ASA 5505 in a switch managed by 2911 router customers to distance-SSL-VPN to inject into the local network managed by the router?
(2) ASA 5505 is behind router-2911. May 2911 router address public ip or public ip address VPN-access attempts have directly be sent to ASA 5505 when there is only a single public ip address address available?
Long put short, ASA 5505 can inject its clients to remote-access-VPN as one of the hosts on the local network managed by 2911-router?
Thank you.I could help you more if you can explain the purpose of this configuration and connectivity between the router and ASA.
You can activate the reverse route on the dynamic plane on the SAA. The ASA will install a static route to the customer on the routing table. You can use a routing protocol to redistribute static routes to your switch on the side of LAN of the SAA.
-
VPN access to the not directly connected networks
Hello
I have a 5510 which is used for Client VPN access and there is something simple that I can't work.
The VPN part works very well with AAA on a CBS.
But what does not is access to networks that are not directly connected to the inside interface.
That is to say the VPN users can connect to the network within the Interface (say 192.168.0.0/24) but not a 10.0.0.0/8 network which is connected through 192.168.0.1 router.
I have the static routes in Routing and firewall all showing the way back to the firewall on all the other networks, but I don't get more far the 192.168.0.1 router...
I use split tunneling and pass all of the private over the VPN - internet networks is used through the own local access to clients.
Can someone help me out here?
Thank you.
Fraser
PS: have the same type of access on a 7206VXR and soft, everything can be consulted and which is necessary - but I would like to move this service to the ASA.
Fraser
I don't understand the ASDM parts as you suggest. The code would be great.
I would also recommend control ACL applied to the inside interface (if any) that it allows traffic as
inside_access_in list of permitted access 10.0.0.0 255.0.0.0 vpnsubnet vpnnetmask
If still no joy, attach your config sanitized, would be useful for me to diagnose.
Concerning
-
Access to a remote network through VPN remote access
Hello
I'm having a problem with users who access VPN from home. We currently have 3 offices facility, as shown below. When I VPN in the Philadelphia office, I am unable to access the resources of Connecticut offices or North Carolina.
The VPN subnet is 192.168.10.0. Inside the office of the PA, I have no problem with NC or CT. I have to add a static route from the Pennsylvania Treasury and NC? If so, could you give me a hand with the correct syntax?
Office <-----------IPSecVPN---------->Office <------------IPSecVPN------------->Office of Connecticut from Pennsylvania, North Carolina
192.168.5.0 192.168.1.0 192.168.2.0
Hello
Yes, basically the ASA accommodation the customer VPN service in this case well enough is the same configuration related to two sites with the exception of course which is obvious
- Networks/subnets
- Different ACL for each VPN L2L
Although naturally the problem for me is the WRVS4400N configuration.
Basically, you do the same things on this unit than the other remote site.
You add the VPN pool as another remote network for VPN L2L configurations. You also confirm that there is operation NAT0 for this network also. I don't know I can help you there as I do not know the device.
Can you please mark it as answered and evaluate other useful answers
Naturally ask for more and I'll try to help you if I can
-Jouni
------------IPSecVPN------------->-----------IPSecVPN----------> -
Cannot access remote network via VPN
Hello
I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
There is also a public oriented Web server in the office which must be accessible.I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.
I'm quite puzzled as to why it does not work. Please could someone help.
The results of tests and the router configuration are listed below. Please let me know if you need additional information.
Thank you and best regards,
Simon1. routing on the router table
Router #sh ip route
Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
C XXX.yyy.zzz.192 is directly connected, Vlan10
GGG.hhh.125.0/32 is divided into subnets, subnets 1
C GGG.HHH.125.34 is directly connected, Dialer0
172.16.0.0/32 is divided into subnets, subnets 1
S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
S * 0.0.0.0/0 [1/0] via ggg.hhh.125.342. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
> ping 172.16.100.1
Ping 172.16.100.1 with 32 bytes of data:
Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 2553. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
> ping 172.16.100.10
Ping 172.16.100.10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.4. ping the router to the successful local server
router #ping 172.16.100.10
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms5 see the version
Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
the availability of router is 1 hour, 9 minutes
System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
10 FastEthernet interfaces
1 ISDN basic rate interface
Configuration register is 0 x 21026. router Config
AAA authentication login default local
connection of local AAA VPN authentication.
AAA authorization exec default local
local authorization AAA VPN network
!
!
AAA - the id of the joint session
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto ASI_Group
key mykey
DNS aaa.bbb.cccc.ddd
domain mydomain.com
pool VPN_Pool
ACL VPN_ACL
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
!
crypto dynamic-map 10 DYNMAP
game of transformation-TS1
market arriere-route
!
!
list of authentication of VPN client VPN crypto card
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
!
!
!
IP cef
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
username admin privilege 15 password mypassword
Archives
The config log
hidekeys
!
!
!
!
!
interface FastEthernet0
WAN description
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
!
interface FastEthernet2
Description Public_LAN_Interface
switchport access vlan 10
full duplex
Speed 100
!
FastEthernet6 interface
Description Private_LAN_Interface
switchport access vlan 100
full duplex
Speed 100
!
interface Vlan1
no ip address
!
interface Vlan10
Public description
IP address xxx.yyy.zzz.193 255.255.255.248
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Vlan100
172.16.100.1 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Dialer0
IP unnumbered Vlan10
no ip unreachable
IP mtu 1452
IP virtual-reassembly
encapsulation ppp
no ip mroute-cache
Dialer pool 1
Dialer-Group 1
Authentication callin PPP chap Protocol
PPP chap hostname myhostname
PPP chap password mychappassword
PPP ipcp dns request accept
failure to track PPP ipcp
PPP ipcp address accept
VPN crypto card
!
IP pool local VPN_Pool 172.16.100.50 172.16.100.60
!
!
no ip address of the http server
no ip http secure server
!
VPN_ACL extended IP access list
IP 172.16.100.0 allow 0.0.0.255 any
!
Dialer-list 1 ip protocol allow
not run cdp
!
!Simon,
Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.
Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.
Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like
IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255
Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.
I hope this helps.
Luis Raga
-
Cannot access remote network by VPN Site to Site ASA
Hello everyone
First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks
ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificatecrypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostnameCryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPNtunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostnameCryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas
Would appreciate any help. Thank you in advance...
If the tunnel is up (phase 1), but no traffic passing the best test is the following:
Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.
inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside
The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).
Test on both directions.
Please post the results.
Federico.
-
VPN access no longer works after upgrade from 10 IOS! Any input to fix?
VPN access no longer works after update IOS 10! With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN. Suddenly, he broke Monday after the upgrade to IOS 10. We have experienced many versions of IOS, and it has always worked. Any patch available?
Hello howlindaug,
Thank you for using communities of Apple Support.If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:
Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
Alternatives for PPTP VPN connections
Try one of these other VPN protocols for authentication by user that are safer:
- L2TP/IPSec
- IKEv2/IPSec
- Cisco IPSec
- VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall
Best regards.
-
SRP526W to transmit or provide VPN access to clients
Hello
We have a SRP526W here, which replaced a cheap, simple router. Now, we would like to set up VPN access for outside clients again. So far, this was done by sending PPTP (TCP 1723 and GRE) for the Routing and Windows 2000 RAS server within the network.
According to this post SRP521W, and therefore I guess so the SRP526W, are not able to pass the GRE: https://supportforums.cisco.com/thread/2093204
Is it possible to provide external client VPN access with this router? Perhaps with L2TP (but then you should transmit ESP) or IPSec (ESP and AH as far as I know)?
If there is no solution, we need to replace this device again once with a cheap, simple, router that is able to convey the Grateful - as you can imagine, we would like to save this shame Cisco.
Kind regards
Dominik
Hello Dominik,
The SRP520 only supports IPSec site-to-site at this time.
Advancements are made, please check in the new year.
Andy
-
Concentrator VPN 3020 - wait of disconnection from the user before extinction
Dear Forum community!
We have a 3020 Cisco Concentrator VPN Balancing cluster configured, the device on main site with top priority. We would like to stop the master device due to short maintenance.
I wonder if there is an option in GUI of VPN concentrator, waiting for all active sessions for volunteers end before the start/stop. Does anyone have experience on this feature?
There are still about 80-100 remote user access VPN online and don't want to break the connections of these users with a simple poweroff.
Thank you and BR
Belabacsi
Budapest, Hungary
I just wanted to clarify two things.
I always save my configuration file before restarting. That's why I restart without saving the changes. I think that my wording could mislead.
If you need your customers to be re - authenticate the VPN session after a period of time, for example 10 hours, the VPN session will be moved to another Member of the cluster when the session is authenticated again. Each client must re-establish the VPN session on another hub in the cluster. If you do not use this feature, you will need to wait until each of them ends its VPN session.
-
ASA 5505: VPN access to different subnets
Hi All-
I'm trying to understand how to configure our ASA so that remote users can have VPN access to two different subnets (Office LAN and LAN phone). Currently I have 3 VLAN configuration - VLAN 1 (inside), VLAN 2 (outside), VLAN 13 (phone LAN). Essentially, remote users must be able to access their PC (192.168.1.0/24) and also have access to the office phone system (192.168.254.0/24). Is it still possible? Here are the configurations on our ASA,
Thanks in advance:
ASA Version 8.2 (5)
!
names of
name 10.0.1.0 Net-10
name 20.0.1.0 Net-20
name phone 192.168.254.0
name 192.168.254.250 PBX
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 13
!
interface Vlan1
nameif inside
security-level 100
192.168.1.98 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP X.X.139.79 255.255.255.224
!
interface Vlan3
No nameif
security-level 50
192.168.5.1 IP address 255.255.255.0
!
interface Vlan13
nameif phones
security-level 100
192.168.254.200 IP address 255.255.255.0
!
passive FTP mode
object-group service RDP - tcp
EQ port 3389 object
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
EQ-ssh tcp service object
vpn_nat_inside of access list extensive ip Net-10 255.255.255.224 allow 192.168.1.0 255.255.255.0
access-list extended vpn_nat_inside allowed ip Net-10 255.255.255.224 phones 255.255.255.0
inside_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
inside_access_in of access allowed any ip an extended list
Split_Tunnel_List list standard access allowed Net-10 255.255.255.224
phones_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 Mac host everything
pager lines 24
Enable logging
timestamp of the record
record monitor errors
record of the mistakes of history
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 phones
mask IP local pool SSLClientPool-10 10.0.1.1 - 10.0.1.20 255.255.255.128
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface (10 Interior)
Global 1 interface (outside)
global interface (phones) 20
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (10 vpn_nat_inside list of outdoor outdoor access)
NAT (phones) 0-list of access phones_nat0_outbound
NAT (phones) 1 0.0.0.0 0.0.0.0
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 X.X.139.65 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = not - asa .null
pasvpnkey key pair
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
VPN-sessiondb max-session-limit 10
Telnet timeout 5
SSH 192.168.1.100 255.255.255.255 inside
SSH 192.168.1.0 255.255.255.0 inside
SSH Mac 255.255.255.255 outside
SSH timeout 60
Console timeout 0
dhcpd auto_config inside
!
dhcpd address 192.168.1.222 - 192.168.1.223 inside
dhcpd dns 64.238.96.12 66.180.96.12 interface inside
!
a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
WINS server no
value of 64.238.96.12 DNS server 66.180.96.12
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout no
VPN-session-timeout no
IPv6-vpn-filter no
VPN-tunnel-Protocol svc
group-lock value NO-SSL-VPN
by default no
VLAN no
NAC settings no
WebVPN
SVC mtu 1200
SVC keepalive 60
client of dpd-interval SVC no
dpd-interval SVC bridge no
SVC compression no
attributes of Group Policy DfltGrpPolicy
value of 64.238.96.12 DNS server 66.180.96.12
Protocol-tunnel-VPN IPSec svc webvpn
attributes global-tunnel-group DefaultRAGroup
address-pool SSLClientPool-10
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NO-SSL-VPN Tunnel-group type remote access
General-attributes of the NO-SSL-VPN Tunnel-group
address-pool SSLClientPool-10
Group Policy - by default-SSLClientPolicy
NO-SSL-VPN Tunnel - webvpn-attributes group
enable PAS_VPN group-alias
allow group-url https://X.X.139.79/PAS_VPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Hello
Loss of connectivity to the LAN is not really supposed all remove this command UNLESS your network is using another device as their gateway to the Internet. In this case configuration dynamic PAT or political dynamics PAT (as you) would make sense because the LAN hosts would see your VPN connection from the same directly connected network users and would be know to traffic before the ASA rather than their default gateway.
So is this just for VPN usage and NOT the gateway on the LAN?
If it is just the VPN device I'd adding this
global interface (phones) 10
He would do the same translation for 'phones' as he does on 'inside' (of course with different PAT IP)
-Jouni
-
Wacky VPN access problem of ASA
Hi people,
I am currenty a situation, and I am in real need of advice...
The situation is that, if ASA helps my remote branches to access my home network and its allowing people to visit Internet inside, its not allowing the remote VPN client VPN access... R V to aid VPN client version of Cisco 4.6...
See a presentation of basic network that illustrates our network and configuration of the ASA...
Advice to solve this problem will be greatly appreciated...
Kind regards
Noman Bari
I see what rou are... Please see my attchement...
Please rate if it helps!
-
I went through the forum messages to allow VPN access to a DMZ host but miss me something and hoping another set of new look will see the question. Basically, need a VPN profile to allow the service provider to a host in the demilitarized zone. VPN connects but I can't access the host. Here is the config and Yes its an old Pix 515 running version 7.2 (5) - will get new firewall soon.
Thank you
Gary
PIX Version 7.2 (5)
!
!
interface Ethernet0
nameif outside
security-level 0
IP address xxxx 255.255.255.252
!
interface Ethernet1
nameif inside
security-level 100
IP 192.168.254.254 255.255.255.0
!
interface Ethernet2
nameif dmz
security-level 50
10.1.1.1 IP address 255.255.255.0
!
permit same-security-traffic inter-interface
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any one time exceed
access extensive list ip 10.254.253.0 outside_access_in allow 255.255.255.0 host 10.1.1.28
access extensive list ip 192.168.254.0 inside_outbound_nat0_acl allow 255.255.255.0 10.1.1.0 255.255.255.0
access extensive list ip 192.168.254.0 inside_outbound_nat0_acl allow 255.255.255.0 10.254.253.0 255.255.255.0
hvac_splittunnel list standard access allowed host 10.1.1.28
dmz_nat0_outbound list extended access allowed host ip 10.1.1.28 10.254.253.0 255.255.255.0
IP local pool hvac 10.254.253.1 - 10.254.253.50 mask 255.255.255.0
NAT-control
Global 1 interface (outside)
NAT (inside) 1 192.168.254.0 255.255.255.0
NAT (dmz) 0-list of access dmz_nat0_outbound
NAT (dmz) 1 10.1.1.0 255.255.255.0
static (dmz, outside) xxxxxx 10.1.1.2 netmask 255.255.255.255
static (dmz, outside) xxxxxx 10.1.1.3 netmask 255.255.255.255
static (inside, dmz) 192.168.254.0 192.168.254.0 netmask 255.255.255.0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 xxxxxxx 1
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-3DES-MD5 value
life together - the association of security crypto dynamic-map outside_dyn_map 20 seconds 86400
Crypto-map dynamic outside_dyn_map 20 the value reverse-road
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
management-access inside
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd ping_timeout 750
!
dhcpd address 192.168.254.100 - 192.168.254.200 inside
dhcpd allow inside
!
internal group CVC strategy
attributes of the hvac group policy
VPN-idle-timeout 30
VPN-session-timeout 1440
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list hvac_splittunnel
hvac xxxx of encrypted password username
attributes global-tunnel-group DefaultRAGroup
authentication - server (outer RADIUS) group
tunnel-group CVC type ipsec-ra
tunnel-group CVC General attributes
hvac address pool
Group Policy - by default-hvac
tunnel-group CVC ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Gary,
Configure "crypto isakmp nat - t" and test it.
If it still does not work, please download the following information from the configuration, after connecting the customer:
1 see the isa crypto his
2 see the crypto ipsec his
Kind regards
SIM.
-
Client VPN access to VLAN native only
I have a router 2811 (config below) with VPN set up. I can connect through the VPN devices and access on the VLAN native but I can't access the 10.77.5.0 (VLAN 5) network (I do not access the 10.77.10.0 - network VLAN 10). This question has been plagueing me for quite a while. I think it's a NAT device or ACL problem, but if someone could help me I would be grateful. Client VPN IP pool is 192.168.77.1 - 192.168.77.10. Thanks for the research!
Current configuration: 5490 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
2811-Edge host name
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXX
!
AAA new-model
!
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
AAA - the id of the joint session
!
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 10.77.5.1 10.77.5.49
DHCP excluded-address IP 10.77.10.1 10.77.10.49
!
dhcp Lab-network IP pool
import all
Network 10.77.5.0 255.255.255.0
router by default - 10.77.5.1
!
pool IP dhcp comments
import all
Network 10.77.10.0 255.255.255.0
router by default - 10.77.10.1
!
domain IP HoogyNet.net
inspect the IP router-traffic tcp name FW
inspect the IP router traffic udp name FW
inspect the IP router traffic icmp name FW
inspect the IP dns name FW
inspect the name FW ftp IP
inspect the name FW tftp IP
!
Authenticated MultiLink bundle-name Panel
!
voice-card 0
No dspfarm
!
session of crypto consignment
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
life 7200
!
Configuration group customer isakmp crypto HomeVPN
key XXXX
HoogyNet.net field
pool VPN_Pool
ACL vpn
Save-password
Max-users 2
Max-Connections 2
Crypto isakmp HomeVPN profile
match of group identity HomeVPN
client authentication list userauthen
ISAKMP authorization list groupauthor
client configuration address respond
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpn
!
Crypto-map dynamic vpnclient 10
Set transform-set vpn
HomeVPN Set isakmp-profile
market arriere-route
!
dynamic vpn 65535 vpnclient ipsec-isakmp crypto map
!
username secret privilege 15 5 XXXX XXXX
username secret privilege 15 5 XXXX XXXX
Archives
The config log
hidekeys
!
IP port ssh XXXX 1 rotary
!
interface Loopback0
IP 172.17.1.10 255.255.255.248
!
interface FastEthernet0/0
DHCP IP address
IP access-group ENTERING
NAT outside IP
inspect the FW on IP
no ip virtual-reassembly
automatic duplex
automatic speed
No cdp enable
vpn crypto card
!
interface FastEthernet0/1
no ip address
automatic duplex
automatic speed
No cdp enable
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
IP 10.77.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.5
encapsulation dot1Q 5
IP 10.77.5.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.10
encapsulation dot1Q 10
IP 10.77.10.1 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/0/0
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet0/1/0
no ip address
Shutdown
automatic duplex
automatic speed
!
router RIP
version 2
10.0.0.0 network
network 172.17.0.0
network 192.168.77.0
No Auto-resume
!
IP pool local VPN_Pool 192.168.77.1 192.168.77.10
no ip forward-Protocol nd
!
IP http server
no ip http secure server
overload of IP nat inside source list NAT interface FastEthernet0/0
!
IP extended INBOUND access list
permit tcp any any eq 2277 newspaper
permit any any icmp echo response
allow all all unreachable icmp
allow icmp all once exceed
allow tcp any a Workbench
allow udp any any eq isakmp
permit any any eq non500-isakmp udp
allow an esp
allowed UDP any eq field all
allow udp any eq bootps any eq bootpc
NAT extended IP access list
IP 10.77.5.0 allow 0.0.0.255 any
IP 10.77.10.0 allow 0.0.0.255 any
IP 192.168.77.0 allow 0.0.0.255 any
list of IP - vpn access scope
IP 10.77.1.0 allow 0.0.0.255 192.168.77.0 0.0.0.255
IP 10.77.5.0 allow 0.0.0.255 192.168.77.0 0.0.0.255
!
access-list 100 permit udp any eq bootpc host 255.255.255.255 eq bootps
access-list 100 permit udp host 0.0.0.0 eq bootpc host 10.77.5.1 eq bootps
access-list 100 permit udp 10.77.10.0 0.0.0.255 eq bootpc host 10.77.5.1 eq bootps
access-list 100 deny tcp 10.77.10.0 0.0.0.255 any eq telnet
access-list 100 deny ip 10.77.10.0 0.0.0.255 10.77.5.0 0.0.0.255
access-list 100 deny ip 10.77.10.0 0.0.0.255 10.77.1.0 0.0.0.255
access ip-list 100 permit a whole
!
control plan
!
Line con 0
session-timeout 30
password 7 XXXX
line to 0
line vty 0 4
Rotary 1
transport input telnet ssh
line vty 5 15
Rotary 1
transport input telnet ssh
!
Scheduler allocate 20000 1000
!
WebVPN cef
!
end
If you want to say, that after the way nat rules which I have proposed, you lost the connection to the VLAN native, so yes, it's because the subnet VLANs native has not been included in this acl with Deny statement. So that the ACL should look like this:
NAT extended IP access list
deny ip 10.77.5.0 0.0.0.255 192.168.77.0 0.0.0.255
deny ip 10.77.1.0 0.0.0.255 192.168.77.0 0.0.0.255 //This is not respected
allow an ip
In addition, if you want to go throug the other tunnel inside the subnet not listed above, then you should include that subnet to the NAT exemption rule with Deny statement.
-
Cannot ping inner network via VPN site-2-site
I have the following Setup of the site 2 site VPN.
The pain I feel is host 172.168.88.3 in site A is not able to ping 172.168.200.3 in site B and vice versa. Think I've added static routes and lists ACLs correctly on 3560 switches (acting as an access point) and the two PIX to access internal networks. 172.168.9.3 host can ping 172.168.200.3 very well. All advice is appreciated.
Thank you very much.
My configs are as follows:
PIX HAS
8.0 (3) version PIX
!
PIX - A host name
activate u18hqwudty78klk9s encrypted password
names of
!
interface Ethernet0
Speed 100
full duplex
nameif outside
security-level 0
IP address x.x.x.250 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
IP 172.168.9.1 255.255.255.0
!
uh78mklh78yMs encrypted passwd
connection of the banner it is a private network. Unauthorized access is prohibited!
Banner motd this is a private network. Unauthorized access is prohibited!
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BST recurring 1 Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS server-group Ext_DNS
Server name 82.72.6.57
Server name 63.73.82.242
the LOCAL_LAN object-group network
object-network 172.168.9.0 255.255.255.0
object-network 172.168.88.0 255.255.255.0
Internet_Services tcp service object-group
port-object eq www
area of port-object eq
EQ object of the https port
port-object eq ftp
EQ object of port 8080
EQ port ssh object
port-object eq telnet
the WAN_Network object-group network
object-network 172.168.200.0 255.255.255.0
ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field
ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper
ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services
Access extensive list ip 172.168.88.0 ACLOUT allow 255.255.255.0 172.168.200.0 255.255.255.0 connect
access-list extended ACLIN all permit icmp any what newspaper echo-reply
access-list extended ACLIN all permit icmp any how inaccessible journal
access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time
IP 172.168.200.0 allow Access - list extended ACLIN 255.255.255.0 172.168.9.0 255.255.255.0 connect
standard access list split_tunnel_list allow 172.168.9.0 255.255.255.0
Access log list split_tunnel_list note LOCAL_LAN
access-list extended SHEEP allowed ip object-group LOCAL_LAN 172.168.100.0 255.255.255.0 connect
access extensive list ip 172.168.9.0 inside_nat0_outbound allow 255.255.255.0 172.168.200.0 255.255.255.0 connect
access extensive list ip 172.168.9.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0 connect
pager lines 24
Enable logging
logging buffered information
logging trap information
host of logging inside the 172.168.88.3
Outside 1500 MTU
Within 1500 MTU
IP local pool testvpn 172.168.100.1 - 192.168.100.99
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image Flash: / pdm
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group ACLIN in interface outside
ACLOUT access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.45 1
Route inside 172.168.88.0 255.255.255.0 172.168.88.254 1
Route inside 172.168.199.0 255.255.255.0 172.168.199.254 1
Route outside 172.168.200.0 255.255.255.0 172.168.9.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 172.168.9.1 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac Set_1
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto dynamic-map outside_dyn_map 1 set of transformation-Set_1
Crypto dynamic-map outside_dyn_map 1 the value reverse-road
outside_map 1 card crypto ipsec-isakmp dynamic outside_dyn_map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set x.x.x.253
outside_map crypto 20 card value transform-set ESP-AES-256-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
No encryption isakmp nat-traversal
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
NTP server 130.88.203.12 prefer external source
internal testvpn group policy
attributes of the strategy of group testvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list split_tunnel_list
Viv ZdlkjGlOTGf7dqdb encrypted user name password
type tunnel-group testvpn remote access
tunnel-group testvpn General-attributes
address testvpn pool
Group Policy - by default-testvpn
testvpn group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group x.x.x.253 type ipsec-l2l
x.x.x.253 group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:bb6ead3350227b3745c14b9ba340b84a
: end
B PIX
8.0 (3) version PIX
!
hostname PIX - B
enable password ul; encrypted jk89A89hNC0Ms
names of
!
interface Ethernet0
Speed 100
full duplex
nameif outside
security-level 0
IP address x.x.x.253 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
IP 172.168.200.1 255.255.255.0
!
interface Ethernet2
Shutdown
No nameif
no level of security
no ip address
!
2ljio897hFB.88fU encrypted passwd
Banner motd this is a private network. Unauthorized access is prohibited!
passive FTP mode
DNS domain-lookup outside
DNS server-group Ext_DNS
Server name x.x.x.57
Server name x.x.x.242
the LOCAL_LAN object-group network
object-network 172.168.200.0 255.255.255.0
Internet_Services tcp service object-group
port-object eq www
area of port-object eq
EQ object of the https port
port-object eq ftp
EQ object of port 8080
the WAN_Network object-group network
networks WAN Description
object-network 172.168.88.0 255.255.255.0
ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq field
ACLOUT list extended access allow icmp object-group LOCAL_LAN all
ACLOUT list extended access permitted tcp object-group LOCAL_LAN any Internet_Services object-group
access-list extended ACLIN allow all unreachable icmp
access-list extended ACLIN permit icmp any one time exceed
access-list extended ACLIN permit icmp any any echo response
IP 172.168.88.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0
IP 172.168.9.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0
IP 172.168.199.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0
access extensive list ip 172.168.200.0 inside_nat0_outbound allow 255.255.255.0 172.168.9.0 255.255.255.0
access extensive list ip 172.168.200.0 outside_cryptomap_20 allow 255.255.255.0 172.168.9.0 255.255.255.0
pager lines 24
Enable logging
monitor debug logging
debug logging in buffered memory
logging trap information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group ACLIN in interface outside
ACLOUT access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.253 1
Route outside 172.168.88.0 255.255.255.0 172.168.200.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set x.x.x.250
outside_map crypto 20 card value transform-set ESP-AES-256-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
No encryption isakmp nat-traversal
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
tunnel-group x.x.x.250 type ipsec-l2l
x.x.x.250 Group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:ccb8392ce529a21c071b85d9afcfdb30
: end
3560 G/W
version 12.2
no service button
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
hostname 3560_GW
!
enable secret 5 $1$ cOB4$ Uklj8978/jgWv? TSSP
!
No aaa new-model
mtu 1500 routing system
IP subnet zero
IP routing
!
!
!
!
No file verify auto
pvst spanning-tree mode
spanning tree extend id-system
!
internal allocation policy of VLAN ascendant
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
uplink Description to Cisco_ASA
switchport access vlan 9
!
interface GigabitEthernet0/3
!
interface GigabitEthernet0/4
!
interface GigabitEthernet0/5
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
!
interface GigabitEthernet0/8
!
interface GigabitEthernet0/9
!
interface GigabitEthernet0/10
!
interface GigabitEthernet0/11
!
interface GigabitEthernet0/12
!
interface GigabitEthernet0/13
!
interface GigabitEthernet0/14
!
interface GigabitEthernet0/15
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
!
interface GigabitEthernet0/8
!
interface GigabitEthernet0/9
!
interface GigabitEthernet0/10
!
interface GigabitEthernet0/11
!
interface GigabitEthernet0/12
!
interface GigabitEthernet0/13
!
interface GigabitEthernet0/14
!
interface GigabitEthernet0/15
!
interface GigabitEthernet0/16
!
interface GigabitEthernet0/17
!
interface GigabitEthernet0/18
!
interface GigabitEthernet0/19
!
interface GigabitEthernet0/20
!
interface GigabitEthernet0/21
!
interface GigabitEthernet0/22
!
interface GigabitEthernet0/23
switchport access vlan 88
switchport mode access
spanning tree portfast
!
interface GigabitEthernet0/24
switchport access vlan 9
switchport mode access
spanning tree portfast
!
interface GigabitEthernet0/25
trunk of the description and the port of A_2950_88 1
switchport trunk encapsulation dot1q
!
interface GigabitEthernet0/26
!
interface GigabitEthernet0/27
trunk of the description and the port of A_2950_112 1
switchport trunk encapsulation dot1q
Shutdown
!
interface GigabitEthernet0/28
!
interface Vlan1
no ip address
Shutdown
!
interface Vlan9
IP 172.168.9.2 255.255.255.0
!
interface Vlan88
IP 172.168.88.254 255.255.255.0
!
interface Vlan199
IP 172.168.199.254 255.255.255.0
!
IP classless
IP route 0.0.0.0 0.0.0.0 172.168.9.1
IP route 172.168.88.0 255.255.255.0 172.168.9.1
IP route 172.168.100.0 255.255.255.0 172.168.9.1
IP route 172.168.200.0 255.255.255.0 172.168.9.1
IP http server
!
!
control plan
!
Banner motd ^ C is a private network. ^ C
!
Line con 0
line vty 0 4
opening of session
line vty 5 15
opening of session
!
end
Hi Robert,.
I went through the configuration on both the PIX firewall and see that trafficking is not defined for 172.168.88.0/24-->172.168.200.0/24.
If you check the card crypto a PIX configuration, it says:
address for correspondence outside_map 20 card crypto outside_cryptomap_20<--This acl="" defines="" interesting="">--This>
and the outside_cryptomap_20 of the acl says:
access extensive list ip 172.168.9.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0 connect
Is the same on the PIX B:
address for correspondence outside_map 20 card crypto outside_cryptomap_20
access extensive list ip 172.168.200.0 outside_cryptomap_20 allow 255.255.255.0 172.168.9.0 255.255.255.0
To allow users to talk to each other, apply to these commands:
On the PIX:
access extensive list ip 172.168.88.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0
access extensive list ip 172.168.88.0 inside_nat0_outbound allow 255.255.255.0 172.168.200.0 255.255.255.0
and PIX B:
IP 172.168.200.0 allow access-list extended outside_cryptomap_20 255.255.255.0 172.168.88.0 255.255.255.0
access extensive list ip 172.168.200.0 inside_nat0_outbound allow 255.255.255.0 172.168.88.0 255.255.255.0
Let me know if it helps.
Thank you
Vishnu Sharma
Maybe you are looking for
-
Myipone4.LockServer, Error403.404
Myipone4.IMEI: [deleted ed].Series: [ed removed].version:5.1.1(9b206)Can'tdownload Update.app, Game, iOS,.Software.NewVersion.initunesstore.Don'topensafarifile, Server.onmobile.Camera360.LockedServer.Error403.404Can'tChangenewappleIDpasswordiniTunesS
-
How to Flash with FF26 and Win8.1 work?
I understand that Windows 8.1 control now Adobe Flash, but have been unable to find a way to make Flash work in FF26. Everything I find is a lot of fingerpointing to each company to one of the other companies involved. There is no detailed explanatio
-
Audio stream OF Android to win 10 PC + Toshiba BT Stack
First of all, I don't mean ways to listen to music from the PC to the tablet. I am looking for a way to play music, e-books, etc. that I have on my Tablet and hear it through the speakers connected to my PC. I'm used to be able to do this with a lapt
-
Mobile: HP Elitebook 8560pBios: 68SCF worm. F.6.1 Modem: AGERA Systems HDA ModemHP hs2340 HSPA + Mobile Network: Intel (R) (R) Centrino Advanced - N 6205Intel (R) 82579LM Gigabit Network Connection OS: Windows 10.0 (build 10240) I've updated HP Elite
-
Photos martignetti 6520 past the test print then prints blank pages
Smart photo 6520 connected to Microsoft Surface running as Windows 10 prints blank pages. Have reloaded driver - assists print test, but all applications print blank pages.