Airport Extreme delay in navigation

Similar Questions

• AirPort Extreme - delays Loading Websites

  I have an AirPort Extreme for 1 year. Without a reason I could note, started having delays all webistes loading.

  Currently I have delays up to 30 seconds or more to load of hosting a Web site, but must of the times it does not load and I have to refresh to reload when I do that website faster and normal expenses.

  My AirPort Extreme is off (bridge Mode) connected via an Ethernet cable to a Modem ZTE (model ZX10 W300) provided by my ISP.

  Anyone has any idea what this could be?

  Thank you!

  AirPort Extreme 802.11ac / MacBook Pro (13-inch, mid 2012) Version OS X El Capitan 10.11.4 / iPhone 6 s

  I see the same thing in Safari on my iPad, I'm also interested in an answer.

• Airport extrem blocks my internet browsing

  HY

  I have an airport extreme with 2 Airport Express, and since yesterday evening, the wifi does not block my navigation. but when im connecting ethernet cable everithing is ok, it's really weird.

  do anyone have an idea.

  also, I CAN go on facebook and youtube wifi but not another site...

  Thank you.

  If you have access to Youtube and other Web site like facebook to check if the site you are trying to open is up or if you type the correct Web address.

• Airport Extreme and Broadband Modem/Router

  I have my Airport Extreme (5th generation) plugged into a Broadband Modem/Router combo. I would like to have both able to use their wireless capabilities. The Airport Extreme has been previously connected to a Modem broadband all my IP addresses came by Airport Extreme (192.168.2. *). With the New Modem/Router combo broadband, it uses 10.0.0 * so I would be able to use Airport Extreme to add the 192.168.2. * While having the 10.0.0. * the Broadband Modem/Router combo.

  Is this possible and, if so, how do I configure Airport Extreme to do?

  Normally, you don't want two devices on the same network as the two try to act as routers to the same network. Which will produce conflicts of IP addresses... which can possibly be addressed... and a Double NAT problem, which cannot.

  The Double NAT error can cause a number of unpredictable issues... things like the problems of communication between the devices on the network, slow navigation... or, not navigation in the case of certain websites, Internet access slower, to name a few.

  Yes, some users may get away with a Double NAT on a single home network, but unnecessarily complicating things over a network is normally something you want to avoid.

  We do not recommend it, but if you really want AirPort Extreme for use range 192.168.2.x however, you can easily make this change using AirPort Utility. If you are not sure how to do this and need help, then we will need to know which version of AirPort utility you are using.

  To find, open AirPort Utility, and then click the menu of AirPort Utility in the far left of the screen corner. Click on about AirPort Utility to see what version you have and post back with that info.

• AirPort Extreme - set time zone

  Greetings:

  I have seen a lot of traffic on the change of the parameter of time zone in an AirPort Extreme, but I can't find an answer.  It seems that it may be impossible.  There is debate if even a hard reset of the device clears the set time zone and allow it to be reset.  It also seems to be no access to the device to terminal implemented a manual correction.

  I left US mountain for the Eastern US time zone time zone.  I have an AirPort Extreme running firmware version 7.6.7 and use version 6.3.6 AirPort Utility.  My AirPort Extreme needs to operate in bridge, because of the way the Internet is provided by our service.  I use the 'access control Timed"to limit the time that my young children are able to access the Internet.

  It should be a simple matter to define the time zone of my AirPort Extreme to my current location (or so it should automatically and reliably).  I don't know if the bridge mode interferes with the ability of the device to find its time zone.

  Can anyone offer advice (other than to apply an offset from my control access timed two hours time difference)?  Can the Genius Bar at my local store to fix?

  Thank you in advance,

  WILX

  Unfortunately, Apple has removed a number of parameters that they feel that the users do not need. Setting the time is one of them.

  Finally, your airport will have the exact time, but it usually takes about 6 weeks for that to happen.  Until then, you will need to manually adjust the access delay settings to compensate for.  When the time of the correction is made, then you have to adjust again timed access.

  We have seen some reports from users who claim that resetting the airport to return to the default settings and then setting them up again will fix the issue of the time, but it has not always worked when I tried it.

  If the 'genius' can solve this problem quickly, then he won the title.

• Airport Extreme network orientation parameters

  Here is our network (diagram below) configuration:

  Internet is available through a pass by modem cable to the Sonic Wall set with a static IP address. The wall of sound, we have a port to a point of cradle that is not with a static IP and gives on a totally different range of the IPS via DHCP to our POS. Another port of the Sonic Wall, I had going to the WAN port on our new airport extreme. I have a switch with some control machines connected to the Airport extreme via an ethernet cable. All devices connected via wifi or hard cable with Airport extreme are placed for IPS via DHCP.

  I am trying to configure parameters on a new device extreme airport our Wi - Fi to my company. We recently had some problems of internet connectivity for a minute or two at a time and I wonder if it could be some sort of conflict of IP address or if it was just a failure of the internet that did not affect the status of the modem lights cable (all were green = connected). Brief history: the most extreme airport on a port of our Sonic wall with the airport extreme is default DHCP and NAT (he gave me the orange light, and he suggested that I put it in Bridge mode). Internet in all of our network seemed to work very well, so I just left it alone.

  30 days later we have a brief interruption in internet connectivity with our credit card processing POS two days in a row for a minute or two of. After the second case, we shut down the extreme airport just in case that was causing our problem. I had a technician COMPUTER down and he suggested I put the airport with a static IP (x.x.7.80) outside the range of IP addresses of our wall router Sonic DHCP-range (let's say it was x.x.7.100 - x.x.7.252) he has been giving and then configured the network settings for DHCP LAN only Airport (I used x.x.7.10 - x.x.7.70) with a range that doesn't overlap the IP of the Sonic Wall range. Part of the confusion, I had during the configuration of the airport was if I needed to plug in our Sonic Wall static IP address in the 'router' address and if I needed to use the DNS servers that appeared in the Sonic Wall settings (I thought he was shooting at those of the cable company). After you make these changes, I got a green light on the airport and the connection was working fine when tested. The next day, we had another interruption of connectivity where our treatment card and internet from WIFI got interrupted. I unplugged the power of WIFI and it seemed that our POS network has begun to process cards normally again.

  The point side cradle of the network is to grasp what IP the sonic wall gives him and give the address on a completely different system that is used in the other part of the network. Another question would be if I can just put the Airport extreme to DHCP mode under the 'Internet' parameter and go to the bridge on "Network" setting Mode I don't know how the bridge Mode would affect our network. I'm not wanting to do anything on the side POS (point of cradle) which is rather difficult with someone like me who is not an expert. Any thoughts are appreciated to help me resolve this issue.

  

  Brief history: the most extreme airport on a port of our Sonic wall with the airport extreme is default DHCP and NAT (he gave me the orange light, and he suggested that I put it in Bridge mode). Internet in all of our network seemed to work very well, so I just left it alone.

  There are two schools of thought on this.  The traditional method (better, in my opinion) would have the AirPort Extreme, put in place in Bridge Mode... Since you already have another router... (the Sonic Wall device which is upstream of your network)... providing routing services.

  Although you might be able to make a network work well with two different devices acting both as of the routers on the network, it complicates things, adds another firewall to the network, and also produces a base called Double NAT network error.

  Sometimes you can get away with a Double NAT error on a simple network, but the double layers of NAT may cause some unpredictable problems. The usual problem is slower navigation, or you will not be able to access some Web sites.  Network devices may not communicate reliably, or communicate at all in some cases.

  This is why Apple software configuration you advise to set up AirPort Extreme in bridge... Mode to fix the Double NAT error. This type of configuration simplifies your network... Since one device will put a router... not two.

  In recent years in particular, we have seen some tips on forums that goes against the rules of traditional networking.  These people that it is OK to have two devices both try to act as routers to the same network... and to 'ignore' the Double NAT error on the network.

  It's interesting tips, since the Apple software advises you avoid having a Double NAT on the network... and some advanced features like Back to My Mac specifically Apple advise to avoid a Double NAT error on the network.  If you have a console online game and you want to play interactively on Internet, you already know that a Double NAT error will not allow this.

  My suggestion would be so... If you have not already tried it... to set up the AirPort Extreme in Bridge Mode.  Apple calls this setting off (Bridge Mode)... which simply means that routing services are turned 'Off' Mode bridge.

  You can still assign a static to AirPort Extreme IP address, if you want, but the devices that are connected to the AirPort Extreme will receive the Sonic Wall router network IP addresses... Since the airport acts as a simple device to "go" when he returns and in Bridge Mode.

• Are not relayed queries ARP on bridged Airport Extreme

  I have a router Xfinity and set up Airport extreme as a router jumpered to connect LAN devices on a different floor.

  Looking at network traffic, I noticed that the ARP requests are delayed or not relayed on the router bridge making it appear that these devices are offline.  These applications should get relayed?  Is there a special way to configure this option to get there?

  I used tcpdump to monitor network traffic.

  It is one of these small problems that make it difficult to use sometimes Apple routers... ARP is a problem.

  Apple recommended using the extreme double NAT... I don't like it, but you can see why.

  I recommend using static IP approach.

  Re: time capsule Airport Guard disconnection

  You sound like you know what you're doing, so it's not difficult for a person with some networks nouse.

  Post again if you find this difficult.

  One thing I added is the default domain in the Airport extreme is local and it seems never even change in bridge... I doubt that you can change the domain of the Xfinity router setting but if you can do then. Do local as well since you can not change the configuration of the router from apple.

  Finally if you still want to use the bridge... try connecting to the WAN port ethernet port LAN of the extreme... In bridge WAN is connected to the local network, but it may be less accurate in bridge, you can even set a static IP address and with the connection to the LAN port ethernet customers should get all the information directly from the Xfinity... If your extreme is the KT model... There is definitely something wrong with the extreme WAN.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• Bridge of Airport Extreme wireless

  Hi all

  I have an airport extreme and I wanted to install a wireless bridge.

  IM on the 2nd floor and my router is on the 3rd floor

  my wireless signal is weak on the 2nd floor, so I wanted to bridge so that I get full signal wireless 2nd floor also

  I do not want to use cable (from the router to the most extreme airport)

  can someone explain to me how to do this

  Thank you

  Hi irfan_mu,

  Check this help page: AirPort base stations: install and configure a wireless network extended (802.11n) - Apple Support

• How to fill Airport extreme wth my DSL router

  I am interested to buy an airport extreme and I currently have a DSL WiFi router. can I fill my current setup and then copy it into the new airport extreme, and then turn off my WiFi in my DSL router? in other words, I wish the Airport extreme to be the main WiFi, I hope I'm supposed?

  You cannot copy between dissimilar model routers.

  And there is absolutely no reason and without having to turn off the current router wifi and every reason to leave it on.

  The extreme must be in bridge including the Apple Installer mode to remove the wireless of comments. So I encourage you to just run two wireless networks... (there bandwidth to run 3 without causing problems).

  Create the wireless on the extreme with your own new values wireless... and you connect some Apple devices you want.

  But you can do what you want... just use the existing router SSID in the airport and use his password... However, this can cause problems for clients who expect a single Assembly and find that they are connected to something unknown.

• I want to register to a new Airport extreme

  I am trying to record a new extreme airport bought on Amazon, I don't see where I can do I also bought a 2-year warranty that I have not yet received

  AS FAR AS I KNOW... Airport extreme is a device and not important in the Apple of things.

  There is no available for an Airport Extreme applecare... If you have purchased an extended warranty of 2 years, this is by a third party.

  AppleCare on a computer, an ipad or apple TV covers the Airport Extreme as well.

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• AirPort Extreme: extend only 5 GHz network

  I have a Time Capsule 802.11n (4th generation) set up to expand my WiFi network at our show in the stairs.

  The WiFi hotspot, upstairs in my office, is an Airport Extreme 802.11n (5th generation).

  Attached to my TV Sony is a transmitter Brightech DoublePlay HD Bluetooth 4.0, running on the band 2.4 GHz effects seriously communications on my WiFi network (demonstrated unequivocally by the device to the USB port on the TV).

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  I named the Base Station Airport Extreme 802.11n 5 GHz network (5th generation) and have set up time Capsule 802.11n (4th generation) in my living room to expand the 5 GHZ network named (not WiFi Dual Band network) but me uncertain whether time Capsule 802.11n (4th generation) in my living room is locked on the band of 5 GHz. is there a way to check this.

  Appreciate your help, any...

  WiFi performance was dreadful while listening to the sound of movie via Bluetooth head sets, take several hours to be ready to play a movie in iTunes or play will stall and plans several hours to be ready to resume.  If I can lock the time Capsule 802.11n (4th generation) in my living room on the network of WiFi 5 GHz, I think I'll have the trouble of sorting.

  

  

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  Sorry, but no. When you extend an Apple base station, two radio stations are extended.

• My ipad 3 has stopped communicating with my airport extreme.

  My ipad 3 has stopped communicating with my airport extreme.  I rebooted, both so that made a network reset on the ipad.  He sees the airport but does not connect.  It will work on the personal hotspot on my phone.

  Hello

  If your ipad works with a hot spot that's the Aiirport is the problem

  Go to the Apple Web site

  support. Apple.com

  You may need a software update for airport how old is this do you have another

  Router, you can try?

  See you soon

  Brian

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you