Airport extrem blocks my internet browsing

Similar Questions

• A network that extends with AirPort Extreme is causing Internet failure.

  A network that extends with AirPort Extreme is causing Internet failure.  When I unplug the extreme internet works fine.  What is the problem?  The extreme old used to be the main, but I reset when I bought the new Time Capsule.  Time Capsule is now the principal.  We had extensive network in the House for over a year with no problems until I put the Capsule in the mixture.  Why they arrive as well as the other?

  Is AirPort Extreme 'extension' of the network by wireless connection to the Capsule of time... or... AirPort Extreme connects to time Capsule using an Ethernet cable connection?

• Airport Extreme and Cox Internet IPv6 problem

  This is one notification to others as well as a question:

  I have Cox Cable high speed Internet in several places using an Airport Extreme 3 GB connected as a router to the modem cable Cox.

  For more than a week, we would find regularly in the morning that the outside connection to internet DNS servers were lost.  We called Cox several times and they have done the usual reset of the router and the modem and things seem to work for some time.  But the next day again.

  They came out and replaced the connections, I I had to buy a new cable modem and I replaced a digital switch.  Every time things seem to work for some time.

  I thought to replace the Airport Extreme (I read others did in a similar situation without result).

  After much frustration, I started looking for Airport Extreme and DNS and found similar stories.

  After that several unproductive calls with Cox Internet of first level support, I finally reached a level which acknowledged that Cox was the IPv6 deployment and he was having a problem with Airport Extreme routers.  They said Apple was working on it and gave me a number to call for support from router from apple.  Unfortunately the number they gave was no longer valid.

  I persisted and finally got the Apple support and indeed they knew the problem and said Cox was working on that... But there was a temporary problem - and that was to disable iPv6 on the airport extreme (more precisely (internet > Internet Options > configure Ipv6: link-Local only).)

  For now it seems to have stopped the decline during the night which seems to happen between 12:00 and 02:00.  By experience, I do not think that its really a problem of compaibility IPV6, but how the router meets some kind of rebate to zero/test signal signal service is done in early morning.

  So the question is - does anyone know with certainty what happens or who really works on this.  From my point of view, both sides think it's the other problem.  BTW - I've read about other people with Non Apple routers running after something similar.

  GABarber,

  I also had a similar problem.  Prior service of Cox Communications in Phoenix AZ has been rescinded and recently restored (March 1) yesterday afternoon.  After the departure of the technician, the wi - fi failed to produce a valid connection, citing DNS error and no response from the server.  We have a new modem, CISCO, at an Air Port/Time Capsule 2 TB ethernet cable.

  After talking with support for level 2 level 1 and then Cox, there was sufficient evidence for a correct signal via the modem, but the Port of the Air was not picking up or he issued (by Cox).  Check my Air Port Utility apps on iMac and iPhone shows a signal Internet or Air Port casual, but never the two together.  The modem and the Air Port so would show appropriate green led lights up, but in vain to work wi - fi.

  The only thing that has worked so far is your solution listed above: Air Port utility > Internet > Internet Options > configure Ipv6: link-Local only.

  Thank you, GABarber.

• Airport Extreme, loss of internet connection of 5 GHz

  When I connect one of my devices (iPad, iPhone or Mac) to Airport Extreme, I see that the internet connection is down at any time. I started a continuous ping to an internal device and the external website using the ip address and I see a time-out from time to time to the external site, which may be more then 30 seconds. Internal devices remains accessible for ping on intellectual property. This occurs only on the 2.4 GHz and 5 GHz wifi doesn't have this problem.

  I'm confused because the problem is only with external destinations after the modem, and only for the 5 GHz range.

  The version of the software is 7.7.3

  The modem is a modem cable Docsis, Ubee EVW320

  Any help is welcome!

  Ubee EWV320 is not a simple modem, but a combination modem/wireless router or a gateway device. How did you get your AirPort Extreme configured to work with this device? What exact model of the extreme you have, and it is connected to the Ubee by wire or wireless?

• Internet connection with XP Pro SP3 and Airport Extreme - possible only Internet with no secruity, WEP - "status is always acquiring network address.

  IMac seen the router and connected flawlessly, Sony Vaio however under secruity always gives me "absorbing the network address", I was looking around and heard xp pro sp3 has problems with wpa2 so I changed the settings for wep on apple Airport extreme and it STILL does not work. If I have no secruity that it picks up the signal from the internet and everything is fine. I tried to update the drivers for the wireless LAN card already, any input would be great

  SOLVED... apparently xp pro sp3 has problems with wpa2, it refuses to connect. I went to settings on extreme airport secruity but wep was not an option, I had to click on OPTION on my MAC keyboard, then click the settings secruity and wep is there, so I removed all the "preferred networks" and restarted the process 'learning' on the vaio and everything's fine. Thanks for all the help, I can get some rest tonight

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Looking to block Ports on AirPort Extreme

  I'm looking to block specific ports when you access a particular service online. I the number of ports I need to block already, but I do not know how to block. I use an iMac running OS X El Capitan 10.22.6 and an AirPort Extreme v7.6.7. Any tips?

  To the airport

  By default all IPv4 ports on an AirPort base station are closed (not ' hidden') to the incoming traffic from the Internet, like the base station uses a simple based on NAT "firewall." However, all ports are open going out.

  If you use a service on the Internet that you send the traffic, the return traffic will access specific ports that the application told him, to complete the loop. If your goal is to 'close' this loop, then you will need to port forward that return traffic to a client is no local network as a potential solution. Not sure how your app will be with some communications being blocked.

  Nevertheless, the solution is to port before the unwanted incoming ports to a local IP address that is outside the DHCP for the network scope. By default, the DHCP of the airport service provides addresses in the 10.0.1.2 - 10.0.1.200 range. You would then be the port forward to attack from 201 up to 254.

  For example, if you want to block the 800 port, you would put in place a port card in AirPort Utility as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the network tab.
  • Select it '+' plus button under Port settings.
  • Enter a description in the Description box.
  • Public UDP ports: 800
  • Public TCP ports: 800
  • Private IP address: 10.0.1.201
  • Private UDP ports: 800
  • Public TCP ports: 800

  For your Mac

  To block all incoming connections to a specific application, use the system preferences, as follows:

  • System Preferences > Security & privacy > select it '+' plus button to add the application.
  • Select the option "Block incoming connections" for this application.
  • Click OK.

  Note: If you want more control over the software firewall in OS X, you need to look into a third party app that does this. Some of them are: Murus and Little Snitch

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• AirPort Extreme AirPort Extreme extension causes a loss of the internet

  I extend an existing AirPort Extreme of 5th generation (a year or so old) with a new one. When I connect a new one for the network and power, airport utility sees the two airports and asks me if I want to extend the existing one. I clicked on extend and every thing seems to be well - within the parameters, he said that the new airport will extend the existing wireless network. Unfortunately this seemed to cause my modem to lose its connection to the Internet. I have reset the modem a few times, but it wasn't until I disconnected and "forgot" to the new base station that I was able to retrieve internet. Previously, I had an airport model more old where I was trying to find a new one, but it had its own wireless network, which is kind of a pain. I would really like to have just a single network for both airports.  Is this possible or do I. To keep them separate?

  Thank you for any help or advice.

  If you spread by wireless, you can't have the extreme new plugged in by ethernet.

  If you do not want to extend wired you don't use wireless extension... you use create a wireless network with the same SSID (name Apple Wireless speaks) and the same password.

  Please give us more information.

  What is the brand and model of the main modem?

  Is this also a router? How the most extreme main airport is connected to the network?

  This mode is in there... router or gateway?

  Please take a few screenshots of the existing configuration using airport utility to show how the current airport is the installation program. We can then tell you the right way to connect the new airport.

  Just to be clear is the New Extreme a nine Gen6... or you want to say you have an another Gen5. The Gen6 is now more than 3 years on the market... No gen5 were therefore sold for 3 years.

  Are mix you models?

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.

• Internet connection Cox Cable & Airport Extreme

  I had the last three or four months a problem with Internet cable fall suddenly. All the lights on the modem cable have no problem with the modem. The Airport Extreme base station has a green light, as well. I have to keep resetting the modem cable 3 - 4 times a day. The ISP is Cox Cable.

  It affects all the iPhone, phone Android, iPad and other Apple computer, we have. All lose connectivity at the same time. If I connect to the Mac mini directly to the modem cable by the cable network the internet connection gets dropped without using the WiFi network.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  2. what else can I check or try to fix it?

  Airport Extreme: How would I test for a problem with the unit master of AE? The only thing I can think to do is reconfigure AE units and using one of the older AE devices as master and see if that makes a difference, but it's a headache to do if there is an easier way.

  Our WiFi network consists of a base station Airport Extreme 802.11ac with two base stations older AE acting as slaves to the base ac station to expand the network throughout the House. All base stations are running the latest firmware from Apple (7.7.3 & 7.6.4 on two more former slaves). The light remained green for disconnects. We have previously disabled IPv6 in Airport utility on the base station to avoid potential conflicts with the Cox' months before the start of this issue of network.

  Cable modem: Motorola MB 7420 - Cox says he could be the modem, so I bought a new modem cable Motorola MB7420 to replace the former Motorola cable modem - always have the same reduced connection problems. The cable modem shows any change in status or lights during connections has dropped, but only reset the cable modem seems to fix the problem. The two modems are not any lights/status change, but there is no internet connection, even if a computer is connected directly to the cable modem once the connection is released. I kept it connected and had it remove the connection to the internet again after resetting the modem (hours between the drops).

  I tried to connect a computer directly to the modem cable with a network cable and had the same problem, so I thought that I had deviated from the Airport Extreme base station as the problem. Now Cox claims that something came out last week, discussing the problems with Apple routers and cable modems or their network. I can't find anything, but they are supposed to send me information later.

  Coaxial connection: Cox is not finding any disconnection or time in their voting for our modem registers. We had three times to check the lines as he first seemed extremely windy Cox and had a problem before with problems connecting to the pole. Who was waived. They tested the connection between the pole and the cable modem, and we get a signal strong; some problems on the survey for our modem logs (every two hours). There is no water in the connections between the pole and the House. We have checked all the connections of the coaxial cable between the outer box and the cable modem. Cox is to revisit all connections around our House to see if they can find no evidence of a problem upstream or downstream from our part.

  Network cables: I replaced network between the cable modem and AE cables as well as AE to a computer next to him - no change.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  There are at least two known issues with Cox here on Apple's Support communities:

  1. Cox started the IPv6 role. The current workaround is to configure your AirPort base stations to use IPv6: link-local only.
  2. The series of Arris/Motorola SB61XX modem is incompatible with 802.11ac AirPort base stations (potentially, 802.11n models as well.) This is not bad in themselves, they just don't "play well" together. I have not heard of all reports on the series of MB74XX... so maybe it's not the question on this point.

  To test the incompatibility, check the ARP cache. It must contain only around a dozen entries. Considerably more could possibly indicate a problem.

  Run the network utility > Netstat tab > select the option "Display routing table information" > click Netstat

  Note: For OS X El Capitan, network utility can is located in Macintosh HD > system > library > Basic Services > Applications, OR via the Apple Menu > about this Mac... > system report > Tools menu of System Information > window > network utility

  To change the IPv6 configures your airport most convenient base stations you use AirPort Utility, as follows:

  From a Mac:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the Internet tab and then, select Internet Options...
  • Change the IPv6 configuration to: link-local only
  • Click on save and then click Update.
  • Allow the base station restart.
  • Do this for each of your base stations.

  Starting from an iOS device:

  • Tap the AirPort Utility to run it.
  • Select the base station.
  • Press Edit.
  • Tap advanced.
  • Tap on IPv6.
  • Change the IPv6 configuration to: link-local only
  • Type actually.

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• My Airport Extreme is connected to a cable modem from Arris Surfboard, overtime, I try to set up it tells me that I am not connected to the Internet if I use a router TP - Link AC1750 can I connect is not my ISP. What I am doing wrong?

  I followed the instructions on how to set up my Airport Extreme, but he says that I am not connected to the internet.

  I can connect with a wireless router TP-Link is not a problem with my service provider. I want to connect with my Airport Extreme.

  What I am doing wrong?

  What exact model of the modem Arris do you have? Is your service provider Internet Cox, by chance?

• Need help to repair the internet connection; Airport extreme and microsoft xp pro

  I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

  Hi Julie,.

  1. do you receive an error message or error code?

  2 have you made changes on the computer before this problem?

  WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

  This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

  Method 1:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Refer to the steps in the following Microsoft article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us updated on the status of the issue.

• Internet provider DOWNLOAD speed vs Airport Extreme

  Hello

  I had download speeds slow on my Airport Extreme for ipad, iPhone and imac.

  I have a modem connected via Ethernet cable to an ac Airport Extreme 802.11 Optimum.

  Ran to the application of speed test on my ipad II (within 5 feet of the airport).

  The results showed that the download is only 2.12mbps and upload is 24.97mbps. I pay for the 50mbps service.

  I tried the same thing by using a new iPhone SE and timed to 22,93 download and upload to 23.95. A little better but still not enough good.

  I contacted Optimum and they ran a couple of tests showing that my modem is online, signals are ideal, there is no loss of data to the modem and there is no failure in the region.

  They recommended connect a laptop directly to the router and without going through the airport. Will try it tonight to see the results.

  Assuming that the connection of the cable between the modem and the laptop is fast, what I can do to improve the speed of the WiFi?

  There is something to put in place at the airport? I guess there will be a reduction in speed between wired devices and WiFi but not this bad. What is the maximum number of devices (iphones, ipads or imacs) airport can support? I have at least 6 or more WiFi sharing schemes and wonder if this is the problem.

  Thank you

  Bob

  Please read using the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

  What is the maximum number of devices (iphones, ipads or imacs) airport can support?

  Apple recommends 50. I got that three dozen sharing an Apple base station AirPort simultaneously with no noticeable performance degradation.

  The factor limiting the bandwidth will be the most restrictive of what follows, in no particular order:

  • your ISP
  • your local wireless environment, including other interference and competing wireless networks
  • the performance of the client machine
  • out of your control network conditions

  Your AEBS will not limit the bandwidth, but if you have reason to believe that it is, a "hard reset" is the only possible troubleshooting step. On rare occasions, an internal parameter becomes corrupted and this is the only way to fix it. By 'rare', I mean "almost never" and the last thing you should consider, after rule out all other possible causes of poor wireless performance.