Airport Extreme with a USB hard drive

Similar Questions

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• The Airport Extreme with Time Machine and HD 1 t

  I have an Airport Extreme with built-in hard drive of 1 t. My iMac has a 1 t hard drive too. Time Machine has successfully supported the HD integrated for a few years now, but he can't. The message said: he needs 2.7 T. Why would it need to back up a hard drive of 1 t?

  I have a few other connected external drives but I made sure to remove them from the Time Machine backup list, so everything there should be backup is the HD 1 t, which still has unused space on it. Anyone have any ideas?

  I have a few other connected external drives but I made sure to remove them from the Time Machine backup list

  I think that you include perhaps instead of with the exception of the...

  If you look at time Machine... the list of disks, you should have is excluded... If remove you it from the list of the excluded, they are included...

  It is opposite to almost anything else, I saw where you include on the list of things.

  In this menu area, you must have all of the listed external hard drives. Because they are excluded not included... If your list is empty as mine... then all are INCLUDED.

  

• Windows 7 computer to connect to Airport Extreme with an external USB drive attached. Flash drive appears for the network map but not the hard drive.

  original title: drive hard extreme airport

  Using Windows 7 and the Airport Extreme.  The Airport Extreme has a USB port that can be used to mount an external hard drive which is accessible via the wireless connection.  Only thing is, I can't get a 2 GB flash drive will appear for mapping.  When I use the other hard drives, they never show upward for mapping.  They show that it is connected to the Airport Extreme, but are not seen by my PC.   The internet has a rumor according to which hard drives will show up only on a PC if they are to FAT32... which would work without another formatted hard drive.  What do you know about my problems of compatibility with hard drives?

  Hello

  Check updates firmware for the Airport Extreme.

  Airport Extreme
  http://www.Apple.com/WiFi/

  Airport - Support
  http://www.Apple.com/support/airport/

  ---------------------

  Although I think that the question is really the Airport Extreme also updates Windows 7 WiFi.
  Check with the system manufacturer and the real device manufacturer updates the driver.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

• Connect to airport extreme USB hard drive

  I have a drive external hard Iomega LDHD-UP that I want to connect to my Airport Extreme (running the 7.6.4)... version but I can't seem to do.)

  Currently, the airport is set up as a bridge to my Verizon Fios router.  It all works very well.

  The instructions from Apple don't seem to help me, because I do not have "Airport disk utility" - only "Airport utility" - and I'm hit a roadblock there.
  (Airport: how to mount a volume of Airport Extreme USB hard drive in Mac OS X and Windows - Apple Support)

  Normally, I can understand something like this, I thought I would ask for help rather than making circles for another hour.

  Any advice?  Thank you.

  OK, so I read all the info in this article,where to get the Airport disk utility >

  ... and I now know that 'The airport disk utility' is no longer (and does not have the article I cited above), but I'm not even see my drive hard when it is connected to the Airport Extreme.

• The airport no longer recognizes my hard drive Seagate

  I have a macbook pro mid-2010 with the latest operating system. For months, I was able to access a Seagate hard drive via the airport. After attempting to import pictures into my library of photos on the external hard drive, the app won out, and suddenly he could not find the hard drive. My AirPort Utility application still showed the drive hard, but with a yellow "!" triangle and said she had lost its connection to the server. My wifi works, the airport still works. My hard drive works when I plug it into the USB port on my macbook, it just no longer works as part of the airport.

  Any suggestions?

  At this point, I would say that you do a ' default ' reset on your AirPort base station. Then set up again for the two goals of networking and to share the USB hard drive.

• How to change the icon of the USB hard drive?

  My external USB hard drives have this icon,

  http://photoserver.WS/images/N2684b7563a181ccc.PNG

  I guess because I deleted somehow autorun.inf file. I tried to change, guide following from this link

  http://www.astahost.com/info.php/change-drive-icons-labels_t7859.html

  but failed. Make a right click on the (H) does not give me the option to change the icon. How to change? Is it possible to do so directly, by selecting another one of shell32.dll, or more must do something with the registry?

  Also failed, recommendation with file autoran.inf

  [AutoRun]
  label = hard USB
  Icon = slick_hd_green.ico

  in accordance with the instructions of the

  http://www.WikiHow.com/change-the-icon-of-removable-drives

  In meentime, I changed his computer management Label, now it is hard USB and then noted:

  http://photoserver.WS/images/eYZB4b758eb2be362.PNG

  and here is happy about its autoran subfolder

  http://photoserver.WS/images/MRmz4b758eb2c5113.PNG

  What should do?

  And another question: what is the best (small) software to create data photos icons?

  Hello

  Your ad is a bit confusing
  Which external HARD drive, you have exactly?

  I know for readers of the icon can be changed in the Windows registry but is it really so important? I doubt that

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• AC2400 (E8350) router cannot map USB hard drive in Windows network.

  Hi all

  I recently bought the Linksys AC2400 wireless router and a USB 3 Western Digital Elements 2 TB hard drive.

  The network works perfectly, except for the USB hard drive. The firmware on the router recognizes it okay, but in the windows network, I can't access your hard drive. I simply get a path not found error.

  I tried:

  Y access inside or outside Windows Homegroup.

  -Re - formatting in the linksys configuration (Fat32... There is room for improvement)

  -Test the USB drive directly into the PC, works perfectly and formatted in NTFS.

  -Turn off all firewalls.

  -Tried the port USB2/Esata instead of the USB3

  Also, from another computer on the network, I get the same error.

  Pre-installed on the hard drive was a mediaserver program called Twonky. He wants autoconnet to my router using port 9000, but the web interface I get then does nothing. Also when I enable the mediaserver configuration linksys website, he created a mediaserver in windows network, wth pilots twonk. But I can't change that.

  When I test the ftp server, I had access to the hard drive without any problem. This suggests that it is not a compatibility problem.

  I could also map the Windows ftp server, but that does not work on my mediaplayer, I need for this network interface.

  Does anyone have an idea of what I'm doing wrong and why windows is unable to connect to your hard drive?

  I didn't install the new version of firmware, because the changelog mentions nothing about the functions of the USB or storage.

  I've added a few photos with the settings, it could be useful.

  THX in advance for any response.

  

  Map of old-school reader:

  1. Open the file Explorer or (right click computer and 'Map network drive')
  2. Click "Map network drive" in the top menu
  3. Choose the drive letter
  4. Enter "\\192.168.1.1\" or "\\192.168.1.1\your-share-name".
  5. Add identifying information if access to the secure folder is enabled "Admin" and password

• Synchronize folders with an external hard drive.

  Can anyone help? I want to be able to sync my library and office with an external hard drive (Freecom on USB) files.  The goal is to be able to maintain an up to the minute backup of all my files, so that the next time my hard drive failure I have to absolutely all backed up. I am aware that that is not only the problem of accidental deletion of files so periodically I will also manually save the backup to a different folder on the same hard drive, or is it also possible to get windows to schedule this backup type automatically)? Or y at - it another way to achieve this level of security of the files without a mirror raid arrays (or spend more money on hardware or software)?

  Try this:

  MS SyncToy

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 and problems with my external hard drives

  I have 2 Lacie (Big Disk Extreme) 1 TB external hard drive attached to my desktop system.

  When I press the Start button and go to devices and printers, the "yellow icons exclamation point warning" are located next to each external hard drive icon.

  Right click on each hard drive icon and going to solve problems, I learned that for each hard drive drivers are missing.

  When I let Windows 7 try 'Apply this difficulty', it is failed every time.  It is said that it cannot search the drivers of these drives.

  Go directly to the site Lacie, there are no drivers to download for these external hard drives (which are around 18 months of age).

  What gives?  How can I get Windows 7 to stop warning me of these external hard drives?  I don't remember having to download all the drivers for these external hard drives when I was with Windows Vista.

  Help!

  Try this...  I found a solution now using Partition Wizard Home Edition 4.2, - its free, then open it to find readers and by assigning a different letter on the external drive - Bingo... applying the changes the disk with the icon is displayed in the pane of the computer and I am able to open the drive!

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• VMHost and USB hard drive?

  Is it possible to setup a VMHost to access a USB hard drive? VMHost running ESXi 5.0.

  Still not clear as to why you need to do. It may be possible, but I don't think that's how VDP was intended to be used.

  Here are the steps you should try:

  • Mount the USB drive to the host and make sure that it is not 'automatically' for use by the VMs.
  • Locate the VMDK with backup files.
  • Determine the size of the VMDK.
  • Determine if there is enough space on the USB drive to the file system.
  • Create a VMFS5 file on the USB system.
  • If the USB and the VMDK are visible both from the vSphere client, copy the VMDK to the USB port.
  • If it is not visible from the customer vShpere, use the tools of command line (vmkfstools, CLI power) to copy or clone the VMDK on the USB.

  This seems too real similar work, isn't it?

  Given that the amount of disk space available for the device .5TB is 850 GB, it won't probably enough space on a USB drive, if you have been backing up virtual machines for any amount of time.  An SSD or a SATA hard drive would be more likely to have sufficient capacity.

  If you succeed to move the files to a USB/SSD/HD, what would be your next step?

  If you move the files, wouldn't be simpler to use Storage vMotion?

• 6.04 MB/s max on a USB hard drive

  I have a USB hard drive, I used for a backup. I use to be able to get 30-50MBps on it, but after that I reinstalled ESXI 4, I was able to get 6.04MBps MAX I tried different guests, different usb ports, nothing seams to help. Any ideas?

  Even if you could a USB key as data store, performance will be slow due the unique axis of key USB and PAHO are / s of SATA would also be very little.

  What a fight, creating an old server with openfiler and presenting as iSCSI?

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points