Ajouter.1 with a loop for?

Similar Questions

• Help with a loop For passing parameters...

  Hello

  I am creating four cubes in Papervision using a loop for. The cube class requires, as the first parameter, a MaterialsList. I created four different MaterialLists in my code with the names materialsList1, materialsList2, materialsList3 and materialsList4. In a loop for, I'm trying to pass these variables as MaterialsList parameter. It does not work. If I use the variables themselves in the code, it works fine, so I know that my problem has something to, with how I'm data, type the dynamic name (see Actionscript below). Can someone please? Thank you!

  The Actionscript code:

  for (var i: int = 1; i < 5; i ++) {}

  
  

  var cube: Cube = new Cube like MaterialsList (("materialsList"+i), 396, 40, 494, 8, 8, 8);

  
  

  container.addChild (cube);

  
  

  Cube.x = i * 430;

  
  

  cube.rotationY = 180;

  
  

  Cube.Name = "the cube" + i;

  
  

  trace (cube. (Name)

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OVER, objectOverHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_OUT, objectOutHandler);

  
  

  cube.addEventListener (InteractiveScene3DEvent.OBJECT_PRESS, objectDownHandler);

  
  

  }

  You are welcome.

  If you're still able, please mark this thread as answered.

• Assign variables with a loop for

  Hi all

  I'm variable loading for a quiz of xml using Ajax:

  $.ajax({)

  	type: 'GET ',.
  	URL: "loadVars.xml",
  	data type: "xml."
  	success: {function (xml)}

  The data that I get are the following:

  word1 = $(xml).find('word1').text ();

  word1distracter1 = $(xml).find('word1distracter1').text ();

  word1distracter2 = $(xml).find('word1distracter2').text ();

  word1distracter3 = $(xml).find('word1distracter3').text ();

  There are about 20 words and I want to use a loop for assign variables on both sides of the equation.

  for (var i = 1; i < 20; i ++) {}

  What's the syntax? I tried:

  "word" + i =

  eval("word'+i) =

  etc.

  Any help much appreciated.

  OK found!

  window ["word" + i] = $(xml).find("word"+i).text ();

• In any case, to use transform activity with a loop for storage of the iterative purpose?

  Hi all
  
  
  I have a question about the processing activity. As I am new to BCI, I want to learn more about the processing activity. If we use a transformation inside a loop activity, all other records other than the last ones will be overwritten. I want to avoid this situation and s output
  
  Scenario of
  -------------------------------
  
  (1) inside a loop for, I keep a DB adapter that will choose 1 row of table. So in each loop iteration for, we will get a line.
  
  (2) in the same loop, we maintain another DB adapter which will retrieve multiple records.
  
  (3) these values, I need to map it to an output variable (output xsd is able to contain multiple records) in the following order.
  < 1Adaptateur out >
  < data1 > < / data1 >
  < data2 > < / data2 >
  < 2 adapter output >
  < data > < / data >
  < data > < / data >
  < / 2 adapter output >
  
  for example)
  < Person > - 1 adapter Db I st iteration
  < name > xx < / name >
  < 23 > < / Age >
  < address > - 2nd iteration of st adapter 1 DB
  home address < address > < / address >
  address of the < address > < / address >
  permanent address < address > < / address >
  < address >
  < / person >
  
  
  < Person > - 1 adapter Db iteration nd II
  yy < name > < / name >
  < 23 > < / Age >
  < address > - 2nd iteration of st adapter 1 DB
  home address < address > < / address >
  address of the < address > < / address >
  permanent address < address > < / address >
  < / book >
  < / person >
  How can I pass the data that we have read from the db adapter in the above format
  
  Pls suggest a solution for this.
  
  Published by: user_ds on June 15, 2011 02:38
  
  Published by: user_ds on June 15, 2011 02:47

  HI'.

  1.) initialize a new variable 'counter' of type int, and assign inside initialize counter = 1
  2.) put the card1 DB and DB map2 invoke the of inside a while loop, then put it
  condition (that you want to use) for the number of times you want to hit the DB again and again
  3.) use affect the activity and inside this use Add and put the [$counter] on the expression of xsl to map to the next node
  4.) now use a beneficiary within an Assign activity where increment you counter + 1

  Yatan-

• Manipulate the subdashboards with a loop for?

  Hi all

  Here is a picture of what I'm trying to do: basically, I want to choose the (3 x 3) A subarray, manipulate data, then

  Select the subarray B (2 x 2), manipulate data, and finally select the (4 x 4) C subarray and manipulate its correspondent

  data. In my real problem, I have more than A, B, C. I have a number any variables.

  I have a 1 d table, below, that I use to make a kind of mapping to my 2D table so I can choose the appropriate sub-table.

  Please see the VI attached and see if my approach is logical. To be concrete, the end result of my VI must be a 2D array containing

  A, B, C and for each variable, I want the sum total of all the numbers corresponding to this sub-table.

  For example, for A, I want 1 + 2 + 2 + 2 + 1 + 5. My real data manipulation would be more complicated, but if I can understand this simple case,.

  the real case will follow.

  I do not know where to store each subbarray in my loop and WHEN to do my manipulation of data, it must be inside of the inside of the loop, outdoors, where? See the attached VI.

  Thanks in advance.

  

  I think you need a boot and wiring through the case of fake.

  Note that the output is a table to a dimension.  Because pages can be of different sizes, the pages 'A' and 'B' contain empty elements. If no match is found fo a 1 d, a full page table element will be empty. To see this 'B' to replace in the table 1 d with "D".

  To make your number a string number followed by conversion table amount works well.

  Lynn

• Write to the file of measurement with a loop For using the value of the dynamic data attributes

  I looked and looked, but couldn't find a solution for this.

  I currently have 15 points of different data that I try to write in an Excel file.  I have all combined in a table and lie with the function "write into a file position.  However, the column names are always "Untitled", "Untitled 1" etc.  I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes.  It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.

  I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '.  The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:

  The source type is dynamic data table 1 d.  The type of sink is Dynamic Data.

  How can I fix it?  I have attached a picture of my installation; Sorry if this is gross (I'm new on this!).  Thank you!

  It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.

• shorten the few lines of codes with a loop for?

  Hello, I have a few lines of code I want to shorten.
  
  , Someone has any idea how to make this right?
  
  Thank you!
  

  :

• Cursor inside a loop FOR?

  Hello
  
  We will declare or define a cursor inside a loop FOR?
  
  -Vijay

  Yes, it is possible that the definition take place inside the part of the plsql block code, the syntax looks like:

  for rec in (/*here you define cursor with select query*/) loop
    ...
  end loop;
  

  I think that if you do not use a variable/slider several times, it is advisable to set the cursor with the loop for. If you want to use the cursor over a school then it should be defined in more global place.

• Dynamic MC Layered syntax for loop FOR

  what I'm trying to do is to access the data of several clips from movies, that are inside several other video clips:
  
  MC1.insideMC._visible = false (which works, but is not dynamic)
  
  but dynamically with a loop FOR I tried:
  
  For (ball = 1; ball < 5; ball ++) {}
  "MC" + bullet.insideMC1._visible = false (it does not) ".
  }
  
  Does anyone know the rating by point or another way to do this?  I'm stuck

  To have interpreted as instance names string values, you use the notation of support/table...

  for (ball = 1; ball)<5;>
  This ["MC" + ball].insideMC1._visible = false;

  }

• creation of the loop for a Boolean value

  Hello
  
  I'm still a beginner at so forgive me if this sounds simple...
  
  I created 16 Boolean values with all the false value.
  
  Now with a loop for, I try to create 16 buttons, and when each button is pressed, the respective boolean compared to this button will change to true. Looks something like below:
  
  Somehow, this does not work... someone can point me to an error in the coding? Thank you very much!
  
  
  

  Couple things...

  It is standard for a button work onRelease, not delivery.

  -at your service delivery made reference to the button. Not the root
  panel mounting as you probably want to target. The real problem, however, is the
  the reference to I in the button. If you do a trace (i); within the delivery
  you will find that each button will trace 17. This is because the button don't
  not to maintain a local reference to i - just button refer to the final
  value of i in the main timeline... it's called scope. Sometimes issues of concern
  can be a real challenge. What you need to do is to create a local variable
  in the buttons and I store it in this variable.

  for (var i = 1; i)<= 16;="" i++)="">
  This ["button" + i] .i = i;
  This ["button" + i] .onPress = function() {}
  This ._parent ['status' + this.i] = true;
  }
  }

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Help with the efficiency of the program, stop a loop for?

  Hi all

  I need some advice programming General to help my VI to operate more effectively.  I have a table in which the program runs each point and 2d compares the value for the surrounding points.  The user can select the range of cells to inspect range, so if the user selects 1, then, it will compare the point (0,0) to all cells in a single cell.  If the user selects 2, then all the cells in a range of cells 2 and so on.  If the point (0,0) is superior to everything around him, then he writes this point in a table.

  I made more notes in the VI to explain what is happening, but I think that the program would be more effective if I could stop a for loop to run as soon as it detects a false condition, i.e. the point (0,0) is not more than one of the surrounding points.  As it is right now, it compares at all points around him, writing TRUE/FALSE for a table, then checks if all conditions are TRUE.  That takes a lot of time if the user selects a value of 8, for example.  It would reduce a lot of processing time if he just threw to the next point as soon as it finds a FALSE condition.

  Any other advice would be appreciated as well.  Try to be a more effective programmer!

  Thank you!
  Alex

  I do not attach the data file, because it is too big.

  In versions before the invention of the loop For with conditional stay terminal, you can do it, but you have over what a while loop to stop when your condition is True, OR when the terminal i is equal to the size of the incoming array - 1.

• loop for and while loop with empty table entry

  Hello

  I have a question with loop and loop.

  When a constant empty array (zero element) is connected to the loop For with "allowing the index", there are no interactions performed in loop For. But, if the loop is replaced by any loop, no problem.

  LabVIEW 2010

  Hello

  It is ok. I have no problem at all.

  For the 'loop' For when you connect the table thanks to indexing, the number of iterations is set to the size of the array. The iteration number assigned to N (in your case 10) is ignored.

  For the 'While' loop the number of iteration is defined by the Boolean Condition and the size of the array is ignored.

  Paul

• Problem with loop "for".

  Hi all

  How can I solve this problem

  

  Disable indexing on the right side of the loop for.

  Consider using shift registers.

• Do nothing in the case structure with loop For

  Hello

  I am trying to extract data from my signal (0.3 0.4 0.6...). I want to extract values greater than 0.5 and put it in a table. If I use a loop For which I can determine each index of my data to be compared and it happened in the structure of the case. In the 'Real' box, I wanted the value to extract outside the loop For. And I want to "do nothing" if my value falls within the box 'False. ' However, it displays error, saying "' Tunnel: lack of assignment to the tunnel '."

  I tried to select 'Default', but it does not work since I use a Boolean comparison. I tried to use the registry to shift, but in vain too.

  Someone could guide me on this to extract only a value greater than 0.5 and index them?

  For example "0.6 0.7 0.8; 3 4 7 index.

  Satisfaction will be given.

  

  

  Here you have

• Help with Mathscipt and loop for

  I have a Mathscript/matlab code and I need to output the table on. One option is my first code, the other option is to use a loop for, but I get only the last exit. I need to get the set of output.

  Any help.

  Thank you

  This is how it should look.