Alarm for the latency of disk esxi-home
I would like to set a new alarm to monitor all esx host disk latency in our vCenter.
We found the settings, to set up this point for a virtual machine.
[vCenter alarm-> add new detector for a virtual machine-> trigger Type: disc Total VM Max (ms) latency]
So we need the same alarm, but for the esx host. But I can't find the right trigger type neighter events on the right (for which we can configure an alarm).
The problem is that sometimes the Raid Controller battery is defective and then we notice everything by checking the performance of the disks-esx table:
We need an alarm for exactly this measure: drive higher (ms) latency.
I also searched for setting up an alarm in the store of data according to, but without success.
Maybe someone has an idea how to set up such an alarm.
Hello!
There isn't any support in Client vSphere or vCenter. You can use esxtop to know but there is a lot of work to get a sort of wake-up call.
A VMware product for this is vCenter operations, but it might be too depending on your environment.
There is many products from 3rd party who will do that for you. vKernel VoP (formerly called vFoglight and I think that Veeam One will do this for you.)
-Martin
Tags: VMware
Similar Questions
-
Can we ignore alarm for the use of the disc on the disc?
Hello
There is a data store of close to 2 TB, assigned to a cluster of servers ESXi 5.
We performed P2V to a number of physical hosts and now only get about 80 GB of free space left. And we get an alarm for the use of the disc on the disc.
We wonder if it will be a problem to keep only 80 GB of free space on the disk (we will not add another VM in this datatsore more in the future).
Your opinion is requested.
Thank you
Yes. Veeam - as well as other applications of image - based backup creates a temporary while backup it VMs. depending on the activity of the drive of the guest during this time the snapshot could develop and fill the instant capture data store. More you customers backup simultaneously more risk. Unfortunately there is no rule on the amount of space free disk is needed, but the 80 GB seem to be really low. With a 2 TB data store, I suggest that book you at least 10% (preferably more) for snapshots.
In addition to this, you need to monitor the disk space on a case where something goes wrong with a backup and snapshot cannot be cleaned automatically!
André
-
Help! I can't change the search engine for the Firefox widget on my home screen
OK, so my engine failure to research on FF for Android is Duckduckgo. It is also the only one I have in my list of search engines in FF settings. I also use the search widget FF on my homescreen for quick search. It is and has always been, Duckduckgo. But, all of a sudden after the recent update (I use the FF, 36 beta something), for my search widget on my home screen, switched to Google search engine! I don't know why... I never use it. But this applies only to the search engine for the FF search on my home screen widget, not when I'm looking for something in FF itself. Does anyone else have this problem? Because I can't find a way to change the search engine in the FF widget... Looked everywhere in search widget settings and in FF itself. Thanks for the help of any body!
I found a way to implement back to DuckDuckGo after a bit of fiddling with the default search engine in the browser.
I think that the update should have overridden the setting somehow. What you need to do is to any other search engine default, then set DuckDuckGo returned as default. This will also update engine of the widget's default search.
I hope this helps.
-
When does support for the end of windows vista Home premium
When does support for the end of windows vista Home premium
Original title: support
Watch the news of Vista on this page:
http://Windows.Microsoft.com/en-us/Windows/products/lifecycle
-
How to check the file for the virtual machine size Esxi shell
Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.
Have you checked "ls-lh', it will provide information as the attached screenshot." "
-
Configuration of Vlan SG300-20 for the desktop and server ESXi
Hello
I'm fairly new to network so please, be gentle. I'm setting up a number of VLANs for my lab at home.
I recently moved jobs and took an Oracle Apps of the Middleware & role has therefore need to start picking up the Apache, e-Business Suite, etc. of the load balancers so need to segragate my network to allow different configurations, I want to install in my lab ESXi.
My setup is detailed below:-
I have a router of dryatek 2860n which is my entry for the installation of the internet on IP 192.168.1.1
My Cisco switch has been set to 192.168.1.2 and the installer to use the 3 layer.
I have a number of PCs connected to my switch I want to use to administer my ESXi server and have access to the different VLANS.
VIRTUAL LANs, I need are the following
VLAN 1 192.168.1.x/24 By default / Internet Uplink VLAN 12 10.0.12.x/24 Workstations VLAN 13 10.0.13.x/24 Server management interface VLAN 14 10.0.14.x/24 Public Interface Server VLAN 15 10.0.15.x/24 Private server interface VLAN 20 10.0.20.x/24 Storage My esxi server has two network interfaces that will have traffic MGMT, Public and private configured as virtual interfaces in ESXi and one that runs my traffic of storage/nfs mounts on a QNAP NAS, I want to make it work on my network
Here is how I have the ports
A Port VLAN membership G1 VLAN1 G13 - 20 VLAN 12 Need to access the VLAN 1, 13, 14, 15, 20
G9 VLAN 13, 14, 15
G10 VLAN 20 G7 - 8 VLAN 20 LAG configured to QNAP NAS G13-20 are my workstations that need to be on VLAN 12, but must also be able to connect to 13, 14, 15, 20, SSH, RDP, NFS
G9 is the Interface of MGMT of ESXi who need to have traffic on VLAN 13, 14, 15
G10 is ESXi storage Interface that needs to access the VLAN 20 only
G7/g8 are connect to QNAP that ideally I want to configure as a LAG. When I get more interfaces in my ESXi Server I'll finally the team to match.
I set up an ip interface in my CISCO switch to 10.0.12.1 as gateway to my workstations and created a static route in my router to allow traffic to the switch. This does not quite yet.
I also installed a default route to 0.0.0.0
I followed a number of guides, but struggling to get my head around concepts and how to achieve the above configuration.
Ideally, I want to configure this through the CLI as Ive had no end of problems with the web interface of the Cisco switch.
I believe need g9 of trunk, and other ACCESS is it exact.
How the workstatations to access the other VLAN?
Any help would be appreciated
Thank you
Paul
Hi Paul, to break it down a little.
Host A connects to port 13.
config t
int gi0/13
switchport mode access
switchport access vlan 12
ESXI connects to port 9
config t
int gi0/9
switchport mode trunk
switchport trunk allowed vlan add 13-15 (keep in mind this vlan 1 is unmarked here and is the IP of your server interface)
This translates
ESXI = 192.168.1.x 24 gateway 192.168.1.2
interface vlan 1
IP 192.168.1.2 255.255.255.0
no ip address dhcp
Host A = 10.0.12.x 24 10.0.12.1
interface vlan 12
name of the workstations
10.0.12.1 IP address 255.255.255.0
With this basic host configuration at shall communicate to ESXI (no other config on the switch)
If please try to get the connectivity of base first, then can work on the roads and DHCP.
-Tom
Please mark replied messages useful -
IX-2; energy in safe mode for the spin off disk HARD does not work
After downloading the first 100 GB of data to safe mode energy enabled for the rotation of the disk (5 min, 15 min,...) no longer works on my unit IX-2. The HD - LED flashes regularly and form from time to time I can hear the HARD disk activity. Even if the LAN cable is unplugged and no connection is possible, there is no change. Before moving on to the actual FW Version and downloading data on the device after the update FW drive HARD off spin has worked well. Are there ideas except the reset of the device or Exchange the device?
Thank you, best regards Martin
Problem is solved. Resetting the device and re-create the rais has helped, the machine works fine now.
-
Can I change the default settings for the latency time Serial Windows with LabVIEW
I have a wireless data collection device that my business is that I am using for the test one of our other wireless products. The device sends data series to a PC via a USB port. I wrote an automated LabVIEW program to test all the functions of my new product. However, after firing in the data, I realized that the serial data coming very fast and requires me to change latency of Windows by default for the port COM 16ms 2ms Miss not nothing. It's pretty easy for me to do locally on my machine, but much more difficult for me to spec for an off-site CM.
Is it possible to have my LabVIEW program change the latency time of the COM Windows port of 16 ms to 2 ms automatically?
Are you talking about the FTDI driver? I know that they allow these changes through registry settings. Thus the approach would probably be to have a small registry script that updates the parameter of function. Most likely, this will have to be run with elevated privileges, as these parameters resident generally in the HKLM or HKCR rather than the HKCU one hive.
-
How can I obtain a license for the free version of ESXi?
Where can I obtain a license for the free version? I installed ESXi 6 and it asks me to enter a license key.
I tried to follow these instructions , but I don't see the option for requestion a license for my type of installation.
That's what I'm running: VMware-VMvisor-Installer-6.0.0-2494585.x86_64-Dell_Customized-A00.iso
Thank you.You can get the license of VMware site as described on the blog post that you posted above, because there is no different license for OEM ISOs.
-
Should what Management Interface I use for the free version of ESXi
I plan on the implementation of the free version of ESXi on a server with Intel VT technology.
I have a management interface for my free version of ESXi.
I was told by someone that I need to manage VSphere.
I can just purchse VSphere and should be fully compatible with the free ESXi?
If so, should what version of VSphere I buy?
What are my alternatives to a manageable GUI that won't cost too much? (I intend to manage only 5 virtual machines on the ESXi server)
Thanks in advance!
When you download the VI client from the http://
-
How do I reinstall the drivers for the printer to windows vista Home premium
original title: How do I reinstall the driivers from printer to windows vista Home premium
my hp 3900 series drivers are corrupted, the HP site says just the drivers are loaded in the Vista operating system, I need the driver and do not have the disk for my printer HP Deskjet 3940.
Consider asking your question to HP - software and drivers forum
http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/BD-p/software
-
Wrong message 'VMware Tools can be updated' for the virtual machine within ESXi 4.1
These VMware tools in my guest operating system keep on the list "VMware Tools can be updated" and the yellow exclamation point.
Host operating system is ESXi 4.1.0 build 348481
VMware Tools version is 8.4.8 build 491717
It is not on the files with the extension.001 as described in the following article
I checked and there is no file with this extension.
I think that VMware tools is unable to read or to compare the correct numbers. Or is there another reason?
Reply to my own post:
The answer, in fact the procedure, is inside this article:
https://communities.VMware.com/docs/doc-31365
For some reason VMware Tools is not installed correctly (for example files from previous versions are left inside the hard disk). So I have to do a manual cleaning before you reinstall the tools.
-
I am not able to connect Stor-E for the other computers on my home network
I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.
I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.
Someone has an idea what I am doing wrong?
But in general your Stor-E works correctly when you connect it directly on different computers, right?
-
Laptop Compac XL580EA #ABT can't do a repir for the operating system disk
Hello
A problem in the operating system is causing a problem with Microsoft office.
Attempted to create a repair disk, get an error: 0 x 80070057.
When I called HP customer service and asked for help in getting a disc, the F11 recovery has also not worked, I was informed by the representative I was road and it is out of line to ask.
Please help :-(
Thank you
Jasmine
Hi Jasmine,.
You can buy a recovery disk set of HP or an HP partner online.
You should try to run the windows system file checker.
Go to a command prompt and type sfc/scannow. Let it run until the end replaced and Windows system file checker instect will all the files he found to be corrupt or otherwise damaged.
-
How to copy "c" for the largest hard disk drive?
My 'c' drive is full, and I need to move to a bigger drive. They do a free program like superduper for mac? I don't want to go through the hassle of reinstalling xp and everything. My xp disk is one of the originals and it takes forever to do all updates. I was amazed when I found a FREE Mac program that copied the disc to start on another drive, nothing for mac is free. Now, to find the same thing for windows.
Kurtmy suggestion is probably the easiest method without hassle by simply installing this new HDD as slave disk because all motherboards can handle at least two hard drives.
(Incidentally, hard drives have few riders can designate the device as a master or slave).
the main drive with the operating system is the master, and you can leave it as what. No software purchase, no worries with imaging or backup and no formatting.
the second hard drive, IE. your new hard drive will be the slave drive. then, you can move all your personal files from the master to the slave.
by moving and separating your personal data system data, you relieve your master drive with as the abundance of data and establish a methodology that will preserve your personal files where system drive is damaged.
If you do not use the method described above, I can share the steps to moving your personal files on the hot spare.
Maybe you are looking for
-
Hello, I'm trying to transfer bookmarks from firefox 8 using the profile of appdata windows 7 for firefox. Everything I read says that there should be a places.sqlite in mozilla profile directory, but only records I see are "cache", "offlinecache", "
-
Change of email on LiveGallery program
How can I change e-mail program used on the Windows Live Photo Gallery? I want to use Outlook Express.
-
Because you are trying to enter my computer, I get the incorrect checksum
Hello When starting my computer, I get a screen I get "Bad CMOS /GPNV checksum".I have a Pentium 4 and then I get to press F1 to enter the BIOS and F2 to enter Windows.I have a hard drive and I installed Windows XP.I checked the BIOS settings and eve
-
after user, login and welcome screen, the screen is black no office
after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the
-
Problems printing reports from Magny accounting V16 (win7 32 bit)
Hello I am haing issues with our Hp C7180 (connected wifi printer) We have 2 printers on the system, a Lexmark is also installed. When you try to print a "notice of pay" Magny accounting V16... If the Hp C7180 is the default printer... MYOB breaks do