Album art disappears for songs from the same album.

Similar Questions

• Is there a way to create a smart playlist without several songs from the same album?

  I would like to create a smart playlist without several songs of his same albums.  Is this possible?

  Timo,

  Unfortunately not.

  Smart playlist logic analyzes each song individually and includes those who correspond to rules.  There is no way to write a rule that depends on other songs in the same album.

• Songs from the same album are organized in different versions of the album

  Several songs on the album are purchased on iTunes so when weve deviated our own music library on tends them to be several versions of each album it appears each with different songs on the album. The problem still persists when viewing music on any of our apple devices, even when you look at the 'albums' category there are several versions of many albums that have only 1 or 2 songs each. We tried to manually change how the songs should be sorted and nothing seems to work?

  If iTunes displays multiple instances of an artist or an album then generally what works is to select all the associated tracks and use read information to add say end X for each of the areas that the slopes have in common:

  • For an album. Album, artist of the Album and artist (if the artist is the same for all tracks) *.
  • For an artist; Album artist (artist and unless there is the comments/featured artists listed that should not be changed)

  Apply the change which merges things together, then remove the excess characters. Occasionally, it can help to close and reopen iTunes between two renaming operations. Part of a compilation should also be set in a consistent manner.

  * If the titles must be synchronized to a non - iOS device, there should be a common artist and/or album must be defined as a Compilation.

  Use the view of songs and display fields, Album, genre, Album, Album artist, genre artist Album, artist and genre artist side by side to see you whether or not it is necessary to change the artist and if sorting values could be the cause of additional problems. See grouping in albums, titles for help if necessary.

  Another tip duplicates stubborn reality. At one point, I had three batches of various artists in the view of artists in my iTunes game library that wouldn't meet usual backward X treatment. What I found worked was adding the final X, but with each group, iTunes wanted to separate start typing a value and let iTunes autocomplete of the Var... for various artists. Collection of AutoComplete lists seemed to work when the full value of collage/montage does not.

  TT2

• Songs from the album split into separate albums/artists, even with the same name

  I have three songs from the album, all by the same artist, but for a reason, that they aren't bringing together under the same album or artist on iTunes. All the songs are listed separately under different artists even if the name of the artist (and album) is exactly the same:

  

  The same artist and album has duplicated only three times.

  I made sure all the info of the song are exactly the same as here:

  

  And sorting is the same too:

  

  So I don't know what else to do.

  If you see unexpected songs groups when you browse an album - https://support.apple.com/HT204538 - 'songs from the same album may not be grouped as expected when you view them in display Albums in iTunes."

  The following sections provide additional solutions.

  Steve MacGuire alias turingtest2 - iTunes and iPod tips and tricks - grouping beaches in Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (old post on Apple Discussions http://discussions.apple.com/message/9910895#9910895)

  Quick response: select all the tracks on the album, file > info (or right-click > news > Details) and give them all a single "album artist", or check the indicator of "compilation" (as in https://discussions.apple.com/message/17670085#17670085).

  If they are several CD sets, you will also need to enter the appropriate information in the fields of number of disk.  If they are not a set of multiple CDs that you must always make sure any vacuum or disc number fields are properly defined.

  Another explanation of hhgttg27 August 2015 - https://discussions.apple.com/message/27784417#27784417

  If they won't even really check this August 2008 post by turingtest2 group temporarily change labels - https://discussions.apple.com/message/7904806#7904806 or http://www.samsoft.org.uk/iTunes/merge.asp - add a letter at the end of the name of the artist, close the read information, then open it again and remove the letter. This works often but I had cases where securities combined when a letter has been added but divorced when he was kidnapped again.

  If they are mp3 files are trying to change the version of the ID3 tag, which can cause iTunes to re - write the tags and clarify inconsistencies.  I use iTunes 7.5 (Yes, from 2007) so I can't tell you where it is in later versions.

  I had a case of grouping stubborn reality.  The tracks will be re-group in a way that has no meaning when I changed metadata.  Without going into details, I deleted tracks iTunes completely, then add the files and they are all grouped together correctly.

• The song of the same artist groups it as a different artist?

  When I add a song from an artist in my ipod, the group as a different artist songs from the same artist that were already on my ipod. I checked the name information and artists are written correctly. On Itunes, it includes the songs under the same artists, not jut not on my ipod itself.

  I have a 7th gen ipod nano

  Hi goodybear,

  I understand that you have questions about the collection of songs in your iTunes library and your iPod. I have a story for you that might be able to clear up this issue, and it is found below:

  Why the songs with the same album art are not grouped together? -Apple Support

  https://support.Apple.com/en-us/HT204538

  Be vigilant and thank you for visiting the communities of Apple Support.

• iTunes separating artist for each song by the same artist

  This is something that concerns me for a long time. After you add a few Radiohead songs to the collection, it wouldn't put them in the same section of the artist. In this case a very large number. So I thought that any other time in this case, I have just remove the artist artist name and album for all of the music of this artist and works in general.

  Not this time. Instead, what it's done is divide the artist for each song. Strangely, if I switch to the display of the album, each song is where it should be. I tried re-entry sorting and grouping information, but nothing seems to work.

  Hello winningbagoafx,

  I understand that iTunes is unable to well to bundle a number of songs together under the same artist. The article linked below, although written for a slightly different situation, details information that can also be applied to a similar situation involving the artist rather than the album.

  Why the songs with the same album art are not grouped together?
  https://support.Apple.com/en-us/HT204538

  All my best.

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

• I live in the United States and would like to buy a song from the Germany. Is this Possible?

  I live in the United States and would like to buy a song from the Germany. Is this possible?

  Hello

  You can buy songs that are available on iTunes Store for your country.

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.

• I just got a call from the same thing with the eventvwr in the race, I wrote down everything, is it a scam?

  I just got a call from the same thing with the eventvwr in the race, I just wrote it down at the bottom, if it is a scam What are they actually accomplishing?  This gives them access to our computers?  They do not seem to be asking for money or that comes up when they try to "fix"?

  You are not alone! See...

  I received a phone call from someone who claims to have a Virus (August 10, 2009 &ff; 40 pages)
  http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001

• Large number of unwanted emails that all appear to come from the same source

  Original title: spam E

  Currently, I get a lot of junk emails that all appear to come from the same source. I was put in my blocked list but the sender then change the address source slightly and I get more. Does anyone know how I can stop this. My address change my only option

  You use Windows Mail? Assuming that the subject field also changes, you could do a message like that rule.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want that messages not in the address book to go to deleted items.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• WMP 12 plays 2 songs at the same time. If a piece is played and I spend almost another song, the second song starts to play and the first

  A frustrating problem with wmp on my new laptop of ASIS Windows 7. During playback of an mp3 file, if I hover near a second file, the second file starts to play in the first.

  The system is used for dance classes, and I need to have the ability to choose a second track spontaneously.

  This does not happen with the previous version of wmp (11).

  The problem would be the touchpad on the laptop?

  Charles Todd

  Hi Charles,

  The description of the problem, it looks like Windows Media Player plays 2 different songs at the same time when hover near a second file in Windows Media Player.

  You can run the troubleshooting Windows Media Player Settings Troubleshooter & check if the problem persists.

  Troubleshooting of Windows Media Player settings

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Please come back with more queries on Windows, we will be happy to help you.

• How to display the scroll bar on every page of the tab where the content from the same block of data?

  Hi gurus,

  Is it possible to display the scroll bar on each tab on Web tab page where the display of content from the same block of data?

  for example:

  Block of data elements used:

  1. employee ID

  2. first name

  3 first name

  4 date of hire

  scroll bar appears on the page 1

  5 salary

  6 commission

  scroll bar appears on page 2

  Many thanks in advance,

  Kind regards

  Ferrere

  Dear fendy_chang,

  A data block can have only 1 scroll bar. If the form is for display purpose, you can create several data bloks that points to the same table for each tab.

  Manu.