Alienware aurora r3 question

Similar Questions

• Small RAM upgrade question for Alienware Aurora R5

  Hello! Currently, I have an Alienware Aurora R5 with 2 x 4GB 2133 MHz RAM sticks and am really happy with it so far!

  But I would add another stick of 8GB 2133 MHz to bring it up to 16 GB, thing is, I'm not quite sure if I can simply another 8 GB stick fit into the slot XMM3 and make it work.

  partly because I couldn't find any documentation on what the latency of tensions/schedules/AR are on the 2 RAM sticks of 4 GB in the pc are currently, and I think as those that are important for the upgrade of ram,

  And because of this thing I found in the online manual for the R5

  

  Seems to say that there are only 5 configuration, I can have this set in stone or is it just that they tested?

  Thanks, Saucybagel

  P.S. I moved here instead of "office computer Forums (Audio, General Hardware, video) ' as advised.

  P.P.S. well, positions of copied it exceeds in any case, I don't know if I can move, heh

  Hello

  Yes, the 8 GB will work on the slot XMM3.

• Upgrade to an Nvidia geforce gtx 1080 on an Alienware Aurora R3

  I was wondering if someone could answer the question of would be upgraded to a Nvidia Geforce Gtx 1080 on an Alienware Aurora R3 or if there is no problem of compatibility or even if someone tried it and it works made me know thank you.

  Hello

  Is not officially supported, but unofficially it should adapt and work (SINGLE CARD).

• Alienware Aurora ALX lights does not work master of e/s part #.

  I tried to get the lights on my Alienware Aurora ALX job. The only lights that works are the head alien and the flange. Work, I mean that they are white. When I Command Center, it doesn't even show fan/readings of temperature or light speeds. I think that my I/o card is bad.

  I can not get something to change in Comand Center.

  I tried all the solutions on the forums and nothing seems to work.

  I reinstalled windows 3 times. Nothing.

  I reinstalled Alienware Command Center 6 times (correct version and the different)

  I tried shutting down the computer, unplug the power cord and hold the power button for 1-2 minutes thing, didn't work.

  I went to reset the map using the Green rider, did not work.

  I ran a diagnosis and everything seems fine, don't know if it's testing the Master Control I/O Board.

  I'll order an Alienware Aurora ALX Alien FX / Master Control I/O Board, because I am sure that my i/o board is bad.

  The reference is 02JXP2 and version 1.1 mine said A02

  The white mark on my map of IO said A02, but it has the same part number 02JXP2 and version 1.1.

  My question is can I use a Board with the same part number but it says A04?

  Here is a picture of the map of IO with the A02, I want to buy a economy part number 02JXP2 and at the bottom says A04 instead, but is a version 1.1.

  

  If anyone as any advice before ordering the card / advice to see if I can get the lights work on my computer?

  ThatOne_Gamer

  I don't have the cable that connects the motherboard to the MIO card.

  I'm sure that's why my ect lights do not work.

  Right... If it is not connected, it cannot work.

• Alienware Aurora R2 - have SATA 3 (6 Gbps) connection for SSD?

  I need to replace my faulty hard drive on my Alienware Aurora R2.  I was going to get an SSD, but only if I have SATA 3 (6 gb/s).  I think that I searched for at least an hour trying to figure this out with no luck.

  Can someone help me?

  Thank you

  Please edit your post to remove the Service tag. This is a violation of the terms of the forum to post a Service tag. You should consider the Service tag as info personal and private, to be shared with employees of Dell and never in an open forum.

  You'll have a better answer to your question if you re - post (without serial number) in the forum of the Club of Alienware .

• Alienware Aurora R4. The system fan problems

  Hi, here is my story/problem...
  My computer is a desktop, Alienware Aurora R4. It is less then a year old. This problem started about 5 days ago now. I called the support technique dell twice. and they don't seem to help, I got frustrated with the phone so im hoping it will work...

  So here's the question: my system fan continues to operate at 4150-5000 rpm and only goes to about 1400-2200 rpm at idle. Today, it has begun to stop randomly. I watched 3 ambient temporary sensors all remaining 24-26 degrees Celsius. The PPI and the fans of hard drive are good at all about 1456 and 1089 RPM.

  Initially the RPM increased while I was gaming. but it did not take long and now whenever I try to do anything he will get very hard and RPM goes crazy. Originality, my PC would be slowed to about 1200-1400 rpm and only go up to 2200-2400 RPM, where the game. its almost as if it was under high load when it is not. and its cool so I'm sure that's not over heating.

  I disassembled the pc and cleaned all the fans and dust with the correct air boards. I have confirmed that everything is properly connected. When that didn't help, I found BIOS version A05 then I updated to the A07.  I ran the Dell PC Diag and it passed, the autopsy of alienware last, Ive ran several analyses of McAfee antivirus, reinstalled the Alienware command center and down the stock of dell pc - which posed problems. I paid and installed the mechanic system and fixed these issues.

  The first time I called Dell tech support guy was very friendly and I have not heard his name. He did lose his time with my settings of video card (not sure why as its only the system fan connected to the wheel and the pump, that is the question) he said that he had to be updated so it updated my video card, and that's all. told me he would send me the next day to check if it worked or not. There has never been back in contact with me, and I have no e-mail address. But all that adds to the question... because since he did this update my gaming experience is terrible. I only play World of Warcraft currently. Normally, my FPS are 75 to 100 FPS and now they jump around a bit, but mostly to sit at 2-17 FPS and sometimes go to 50 FPS, if I'm not moving. So im guessing the settings it's fair question... my card is a 2 GB AMD Radeon 7870

  Then, I recalled once again a day later. and the next guy was not as friendly. don't give me his name either. he wouldn't do anything, he just told me that the notes from the last call said that it was not a problem, and that it was quite normal heating. I'm sorry but my house is way cooler in the summer then it's winter and temperatures are always flat and stable. its blowing cool air and a large amount of air. He didn't listen at all.

  then the next day it remains to 4150 rpm for 90% of the day instead of 60% of the day. even if im not using it. And she randomly stopped several times. from what I can find on these forums and online that is as a module fail safe mode... so obviously it is not normal!

  As today is the first day it started to close I wanted to re-run the diag tests, but whenever I try, it runs for a few minutes, then the pc stops. The computer is running too slow, but this may be a different problem. I managed to get the dell diag and system mechanic to run tests, and they spent too. IM at a total loss...

  The air coming from the fan system is very strong and cool so I don't think there are more heating goes on. As far as I can tell the pump works properly and all the fans are running.

  This pc is less then a year old, so it is still warranty on it, as well as I, have purchased another year of warranty shortly before it started actually... And I don't want to try something else without help, because I don't want anything damage or damage my warranty coverage

  I'd appreciate very much any help im at a loss to know what to do, and feel the support tech will start ignoring me if I recall more. If you can help out you can reach me at my email which is [email protected]. Or respond to this conversation.

  Thank you and hope to hear from you,

  Katelin

  Hi, looks like your processor is overheating and your system shuts down in order to avoid that the components of frying. Install the utility core temperature and set up the readings of temperature on your hearts. www.alcpu.com/.../download.php  Your thermal paste can must be reapplied or your water fountain might need to be replaced. Let me know what your temperatures are for the carrots and the ambient temperature.

• Re-install windows alienware aurora r4

  Ive had a little problem with a previous problem and now I decided to reinstall windows 8.1 and I need some adivice to install windows on an alienware aurora r4

  I have the "Alienware Aurora R4 resource, but from what ive read that I shouldn't use DVDs that on it because it's old sofware.» Instead, I have to download all on the Dell.com site upadtes

  What I really need advice or a tutorial for someone who has never restore or formatted your desktop.

  Suppose that I have installed windows 8.1. will be the liquid cooling sytem processor, fans, and fans will work? im a little scared that nothing works form the beginning and can cause damage due to overheating.

  I also lose my service tag and the express service code which is on my system?

  Before you do anything on my computer, I'm on the Dell.com product support page were all the drivers for my computer are

  ON order of the instalation

  application is first (part of it is alienware command center)

  drivers

  then the BIOS

  My real question, that's really what I really need to use the resource dvd for something or technical support dell gives all the drive required for installation.

  Thanks in advance

  Drivers on the Support of Dell for the R4 page are likely to be newer than what's on your DVD of resources, so you must download them from the site and save to USB or other external device for installation on the R4.

  Probably get you a better answer to your other questions if you re - post in the forum of the Club of Alienware . And it might be a good idea to provide details of your problems and why you want to reinstall Windows. Maybe someone out there can help you fix things without having to do a clean reinstall...

• I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

  I buy my fiance an Alienware Aurora with these stats:

  Base: Alienware Aurora ALX 875W matte black frame w / AlienFx ColourPre
  Processor: Intel Core i7-4960 X processor Extreme Edition (6 cores, 15 MB of cache, up to 4.3 GHz overclocked)
  ASETEK liquid cooling CPU
  OS: Windows 7 Ultimate SP1 64-bit
  Graphics card: Double 6GB GDDR5 NVIDIA GeForce GTX 780 SLI
  Memory: 32768 (4X8Go) MB 1600 MHz DDR3 Quad Channel
  Hard drive: 4 TB RAID 1 + 0 (4 x 2 TB SATA 6 GB/s, 7200 RPM, 32 MB of Cache)
  Optical devices: 8 X RW Blu - Ray (Blu - Ray, DVD, CD read & write) & 24 x DVD +/-RW
  Sound card: Integrated HDA 7.1 Dolby Digital capability
  Speaker system: Logitech Z506 5.1 Surround pregnant 75W Total
  Game keyboard: UK (QWERTY) Alienware TactX keyboard
  Gaming mouse: Razor Naga Molten
  Two monitors: 2 x Dell UltraSharp U2713HM 69 cm(27") LED monitor DVI, VGA, HDMI (2560 x 1440), DP black UK

  I went to very difficult to leave my boyfriend to buy this pc.  First of all, that we now live in different countries.  I live in the United States and he lives in England.  We met on a PS3 game online called DUST 514 and played a lot of pc games together as well.  It is difficult to have to steal it back, but we're getting married soon and I'll come to England.  He needs a new PC for years and was jealous of my Alienware Aurora R4. So I decided to buy one that is still better than mine since it's even greater player I am . This will also allow us to play more games together .

  Then I he wired the money and thought that everything would be ok, but you wouldn't believe the amount of screw - rises, that Dell threw on him!  They had even cancel a bunch of commands of the peoples, b/c, trying to control his spec-ed on Alienware has revealed a major screw-up affecting many clients... (Sorry, it made me delete/modify-this until his order passes through.  Dell representatives were concerned about what happened past.  I don't know if they told people that they had to cancel the real reason why orders and the possible impact on customers with currently Alienware Aurora...  I'll tell you what they have done after that his order is finally through.  Just a hint... inside your Alienware Aurora, check if you own to make sure that everything you ordered is actually there...)  He tried to do this for a week now...  I thought Dell was a little better than that... I knew they had bad grades, but really?...  In any case, it is a complete system stressed mess of it all back and on phone calls and e-mails with different people of Dell.  So I thought that, if it still manages to get the Alienware, maybe I can do even better!

  He really should have an SSD, so I'll get a. He was talking and drool on the maps of Titan, so I'll give him two EVGA NVIDIA GeForce GTX TITAN Superclocked 6 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express cards in SLI config! : http://pcpartpicker.com/part/evga-video-card-06gp42791kr

  I've never built a pc or tinkered with all hardware.  I want to make this even more impressive pc by adding an SSD.  I think I can install an SSD without any problem (I want the Samsung 849 EVO Mz-7TE1T0BW 2.5 "1 TB SSD)... Oops... I just thought of something... 4 TB SATA is actually 4 2 TB SATAs, put in place with 2 as the mirror...  I think that there are only 4 connectors for extension for SSD/HDD... Is this correct?  I have to replace one of the SATAs 2 TB with the 1 TB SSD?  What configuration I would define then the three SATAs 2 TB?  Would it be to say that he would have only 1 TB SATA? Could I set up so that it has SATA 1.5 TB (with SATAs split with half active and part of the half of the mirror for a RAID configuration)?  Furthermore, I have really no idea what RAID is or fact, just that you only half of total storage really active and the second half is as a backup in case of failure of a disk or something to avoid any data loss total... It is also the thing that I'm confused about that I don't know if it is also possible to install two graphics cards of Titan in SLI configuration on the micro ATX motherboard, I guess its Alienware Aurora will be, and still less 1 Titan.  Yes I know it is exaggeration lol, but the game is very important for us, especially since this is how we met.

  Sorry for the long post... Finally, the MAIN POINT & QUESTION:

  I have to install a different motherboard like the Asus Rampage Black Edition IV: http://pcpartpicker.com/part/asus-motherboard-rampageivblackedition in order to install two Titan GPU in SLI configuration?  If so, how this O_o...?  Also, I heard that there is a 'girl' Council that controls the Alien FX LED lighting and ventilation Active... How to connect to the new motherboard (if I need to get a new one)?  Also if I get the other motherboard (if this motherboard work with everything) this motherboard would have space for 4 x 2 TB RAID 1 + 0 and the 1 TB SSD SATAs?

  Please answer.  Thanks, ~ value

  Setsuka

  to install two Titan GPU in SLI configuration?

  Don't know why you config-ed with two years 780 in SLI if you want two Titan-SLI but this guy did:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19512935/20402844.aspx#20402844

  Personally, I'd keep just 780 - SLI, since the two configs end up being very similar to the performance. Either they're going run hot (in the game of max.).

• Graphics card problems: Alienware Aurora R4

  Hello

  Today, I tried to install a new 770 GTX graphics card in my system, replacing the 1 GB GDDR5 NVIDIA GeForce GTX 555 I had initially installed in the system, the graphics card by default. Having no experience with computers, I talked to my friend who gave me the correct warnings to recognize with respect to electrostatics.

  I followed this official video on YouTube and came out of my old graphics card and replaced it with my new. When I started the computer, Alienware logo appeared (with messages you can press F2 or F12) before turning into a black screen with a flashing icon of cursor/underscore (_) in the upper left corner. No key worked.

  Then I tried to replace it with the original graphics card, that had the same issue - but I noticed the blinking cursor was slightly further away from the upper-left corner of the other graphics card. Even if there is a difference, however, neither worked.

  Given that the system has two PCI Express slots, I pulled the screws for metal which has blocked the second and tried to move the GPU. Yet, I was getting the same error.

  After having looked up, some said they had the same problem (on the YouTube comments for linked above video), as well as vary the technical support forums. An answer to this is that the motherboard had blown perhaps. To test this logic, I took the charger for my mobile phone and plugged into a USB port on the computer... the phone has started to load.

  The BIOS does not seem to load, I tried the keys so many times. I contacted ASUS, who did the graphics card, but they do not seem to know, either. This is literally my last resort.

  Thank you.

  --

  Precision on the plan before that:

  Intel Core i7-3820 (four main, 10 MB of cache) 3.60 GHz
  Alienware Aurora: 875W matte black chassis
  Memory: 8192 MB (4x2Go) 1600 MHz DDR3 Quad Channel
  Hard drive: 1 TB SATA 6 Gb/s (7200 RPM) 32 MB Cache
  Graphics card: 1 GB GDDR5 NVIDIA GeForce GTX 555
  Operating system: Windows 7 SP1 Home Premium (64-BIT) English

  camlem

  Hello. I have what I believe, it's a very simple question, I want to just make sure before I invest the money.

  Can I use any card Nvidia GTX 780 on my Alienware Aurora R4? In my opinion, there are different brands (Asus, EVGA, Gainward, Gigabyte) and I wonder if this would work ok. Are there significant differences between those marks and, if so, which do you recommend?

  My current characteristics are exactly the same as the original poster:

  Intel Core i7-3820 (four main, 10 MB of cache) 3.60 GHz
  Alienware Aurora: 875W matte black chassis
  Memory: 8192 MB (4x2Go) 1600 MHz DDR3 Quad Channel
  Hard drive: 1 TB SATA 6 Gb/s (7200 RPM) 32 MB Cache
  Graphics card: 1 GB GDDR5 NVIDIA GeForce GTX 555

  Thank you!

   
  With 875 watt PS, it should work.
   
  Most of the eVGA cards have lifetime warranty (exact model of watch no./SKU you buy actually). I would buy eVGA.
   

• Cooling system Alienware Aurora R4

  Due to several accidents on my R4 Aurora, I google after the reason because these crashes, and I read that a problem could not work liquid cooling system. I live in Zurich in Switzerland, where I can buy a new cooling system?

  eBay Europe... examples of US stock cooler ... 'none' wide wide 120x25mm or 120x38mm should be ok... Google images Corsair H80i

  

  replace the stock R4 Alienware Aurora CPU cooling pump

  R4 (need advice)

  

  R4 premium 38mm large radiator manufacturer 01YGW (google/bing/eBay or Dell Sales)

  The thermal high quality grease if your cooler is delivered without any substantive multi-orientation

• (Redirected) The R2 of Alienware Aurora upgrade

  Hi all

  I've had my Alienware Aurora R2 now in 2012 and I was completely happy with it - she has never missed a beat.

  I want to upgrade the video card and RAM to deal with some upcoming games.

  Current specifications are:

  i5 CPU 650 @ 3.2 Ghz

  6 GB OF RAM

  RADEON HD5670

  I'd appreciate some tips on the best compatible card and RAM to buy.

  Best regards and thanks,

  vs_ursus

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• How to reinstall a Windows 8 dell alienware aurora r4 to factory settings?

  A friend of mine had his PC scammed (guy calls, said you that they are Microsoft and you are infected, enter your PC and then you lock out and ask $ money to let you back in).

  Anyway, he has a PC Dell Alienware Aurora R4 (comes with) running Windows 8 or 8.1 - I don't know but I know that he has not improved/changed anything. The system came with a DVD resource (nothing else).

  Now all we want to do is to restore factory default, there is nothing about this of any importance to save...

  I looked on the internet and found what looks like the right solution:

  -Enter advanced service options (holding shift at the start), select "troubleshooting."
  > "Icon Dell Backup and Recovery" is missing (how could it be?

  Without that, I'm totally stuck...
  Any suggestions? Recommendations? Ideas?

  Thank you

  After that a clean installation of Windows and the drivers of Dell system, Dell backup and restoration facility will create a new recovery partition of your own installation that you can restore as new factory settings.

• Delivery of Alienware Aurora

  I bought a new Alienware Aurora desktop computer Thursday morning (August 25, 2016).  What is the average time to build and deliver my new computer?

  Please share your experiences.

  Mine shipped 5 days after ordering even if my estimate has been a few weeks.

• What should I get my alienware aurora r4 to run a nvidia gtx 690

  Hi I bought an Alienware Aurora R4 year last May. Here is my card of gooseberry. Although I'm upgrading to 8 GB ram 16 GB.

  I want to know if I can just buy and put in an Nvidia GTX 690 or if I need to update some things before hand, I'm pretty new on pc and do not understand all the terms then do the answers as simple as possible please. Also links to things I should buy would be great, I live in the United Kingdom

  Operating System Microsoft Windows 7 Professional 64-bit SP1CPU  Intel Core i7 3820 @ 3.60GHz    57 °C Sandy Bridge-E 32nm TechnologyRAM   8.00 GB DDR3 @ 800MHz (11-11-11-28)Motherboard  Alienware 07JNH0 (CPU 1)    59 °CGraphics   DELL U2410 (1920x1200@59Hz)   DELL 2405FPW (1920x1200@59Hz) NVIDIA GeForce GTX 560 TiHard Drives    932GB ATA ST31000524AS SCSI Disk Device (RAID)    932GB ATA ST31000524AS SCSI Disk Device (RAID)Optical Drives    DTSOFT Virtual CdRom Device   DTSOFT Virtual CdRom Device   DTSOFT Virtual CdRom Device   PLDS DVD+-RW DH-24ABS SCSI CdRom DeviceAudio    Creative X-Fi Audio Processor (WDM)
  

  I can not find my powersupply sticker anywhere, I have even opened up case and looked inside so no idea what my power input is.
  

  I really want to upgrade my graphics card so that I can play on 3 screens as well as have a higher FPs and play at ultra, although the 560 allows me to play in ultra in some games, it does however become super jumpy in Skyrim.
  

  Thanks
  

  Well assuming that your diet is 875Watts and your current GPU GTX 560 ti is using power connectors 2 x 6 pin. The 690 GTX requires however power connectors 2 x 8 pin.

  All you have to do is to give the GTX 690 the right amount of power giving him connectors 2 x 8 pin.

  Just make sure that you remove your current video adapter and install the GTX 690 in the same dwelling.

  GTX 690

  

  GTX 560 TI

  

  Food-

  the image above shows the power supply, (hidden by a side cover) all the extra cables are hidden there and should be easily accessible.

  

  

  The image above shows a 2 connector pins for power in the green zone. When you take out GTX 560 Ti power connectors and place inside 690 GTX you need to add additional power connectors 2-pin.

  PS, you might be able to find 8 connectors there though.

  Good luck

• Need help with Dell Alienware Aurora

  My brother has just given its Alienware Aurora to my boyfriend and the computer doesn't turn on by the power button, but it turns on with the button in the back while my boyfriend is now but turns off immediately after.  It works great when my brother had therefore no idea of what the problem might be now.  Please help, thanks.

  Alienware Aurora ServiceTag: Service tag removed by privacy policy >

  Express service code: abducted by the Express service code privacy policy >

  You will probably get a better response if you re - post it in the forum of the Alienware Club.