ALIENWARE R4 - fan noise problem. HELP PLEASE

Similar Questions

• Satellite A500: update BIOS V1.50 is fan noise problem reappears

  I have a Toshiba Satellite A500 with fan noise problem.
  It has been partially resolved the upgrade of BIOS from v1.20 to v1.30, according to this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=46719&start=0&TSTART=0
  

  Yesterday I updated the BIOS v1.50, and the sound of the fan returned.
  I do not recommend this upgrade if you have had the problem of fan noise.
  

  I have downgrade BIOS v1.30 and fan noise problem is solved again.
  I know that people have problems to get the downgrade to BIOS, so I describe the process in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577&TSTART=0

  Thanks mate for sharing this with us

  But perhaps you could use the v1.5 BIOS and could reduce or reduce the activity of module cooling in Vista/Win7 power management settings.
  It would be interesting to check it out

  In any case thank you for this info

• The payment change ADOBE info Web page fails - I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  catsrock

  Great salvation,

  We are sorry for the inconvenience caused to you!

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul

• Satellite 2450 S203 fan noise problems

  Hi guys

  I had a Sat 2450 S203 since October 2003 and have recently noticed that whenever I run memory intensive programs fan noise levels are excessive and constant!

  If someone could Advisor on the replacement of the fan and know if I should do it myself. Please also comment on the impact on costs as well. Are there other ways around to get rid of this problem?

  Hello

  After this long period, your device must be cleaned properly. I guess that dust inside the unit don't allow adequate cooling and cooling fan must often runs and faster to cool the hardware components. It is not only specific for your device, but for all laptops.

  I'm sure that after cleaning, your device can take a deep breath and will work a lot better and calmer. I noticed the same thing with my Satellite P20. After cleaning the laptop runs very quiet and cooling fan just works sometimes. I'm very happy now.

• Import and copy from one catalog to another has some problems-help please

  Hi people,

  I have two catologs on two different disks. I imported a number of raw images from one to another using the copy. He did also copy xmp files, but most of the images do not appear to have been developed. I did something wrong? Is this a new stage so these images acknowledge the work accomplished since the xmp file?

  Second, the virtual copies have been copied not more as well. They are in the first catalog, but not when I imported and copied.

  Help please while I can still understand what images I imported because they are in every sense, and maybe I need to recreate my steps.

  Lightroom 3 more up-to-date, Windows XP.

  Thank you.

  ~ Bob

  Bob,

  You import or catalog? You need to do the latter.

  

  If you are importing a catalog, remove the images that you have brought to and use the above menu option.

  HAL

• Dell studio 1558 fan noise problem

  Hello dell.

  I wonder how many people got prob with studio dell 1558, just google and found most of them (all) having prolem with the dell studio 1558 fan noise.

  What happens in my case:

  The fan noise was ok before a few weeks ago, and he started 2-3 weeks back. aaftre fans of 20-30 sec noise suddenly and during idle sound Inc. is not normal/quiet a bit different than usual.

  The fan noise is really annoying and it constantly happens not even a minute, it stops.

  So in my case I think that it may be hardware fan prob because I wasn't this prob when I bought this system may be fan is going to jam in a near future?

  It's my system config:

  Studio 1558:

  : Processor Core i3 M350 2.27 Ghz processor

  RAM: 4 GB

  Gfx card: ATI Mobility Radeon HD 5470

  HARD DRIVE: 500 GB

  Backlit keyboard

  Slot load CD/DVD player

  P.S.: My CD/DVD drive and HARD drive recently prob SO dell replaced both.

  Thank you

  Manan

  Today engineer came to my house and the replacced he fan + heatsink. Thermal paste is already on it I guess, it has not applied separately.

  Fan runs smoothly.

  Failure: in fact the outer part of the radiator is responsible for this when the engineer came out the part and he hit an outside party who is also visible (Manager) of air is broken.

  It was broken when an engineer trying to clean the fan lol.

  I've also attached the image of the broken part. Image is not good but always visible

  .

  Another view:

  

• SG200 fan noise problem - 50 p

  Hello, I need help to solve the problem with the fan control. Sometimes, once a day, the switch to start to run the fan at full speed. I understood when we increase the temperature. But running this full speed all the time, only power off assistance. Thank you, Marek Ján

  Are you running the latest firmware 1.3.7.18 and boot 1.3.5.06?

• TV noise. Help, please

  I have a Sony Bravia kdl55hx925 and having problems Power Board I think. It makes a humming noise and it stays on after that I still walk off the TV after I turn it off the unit. It switches off only from the point of power. Military of Sony replaced the power twice Board and capacitor once anything will do. They now have it and it is there can not hear as it is random. Anyone had this happen before? What is it and what do I do? Warranty is exhausted, the week last car I bought March 2012 and paid $3500 $

  Hello

  See the link below and check if it helps.

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C158567

  If the problem persists, the service is required

  http://eService.Sony.com

  Kind regards

  Jeevan :-)

• Playlist problems HELP Please!

  Hello! First post here and unfortunately, its about some problems.

  I'm having problems with plalists and don't know how to fix. Okay, I create the playlist in Nero M3U format, encode files

  off a CD to MP3 and then using Wexplore, copy them into the Clip. The playlist is in the Playlist folder and MP3s

  in the folder of songs. OK, it sorta well worked during the first three playlists.  Herer are now the problems:

  1. when I try to play a playlist in the playlist folder, it shows the playlist in a vacuum. The playlist appears however

  in the Albums folder and the first three have played fine from there.

  2. ok, the fourth one that I've added shows in the unknown album for a title folder. He plays very well however songs.

  He appears in the playlist as unknown and 'empty' folder when I try to play from there.

  3. the fifth one I added does not appear in the Albums folder at all (the only place I can play any of the playlists).

  It appears in the playlist folder, but appears as empty when I try to play.

  I used the exact same design and copy for each method and of course make me different results. All the songs

  I copied to see the place of songs and play very well. The playlist feature is not very reliable at this point.

  If anyone has experienced this problem and have a solution, please let me know. I enjoy my video, when it acts right.

  I just properly finish loading all my music and playlists so I can listen to my favorite things when I practice my golf

  Swing on the driving range.

  Thank you people!

  Did last night and got the problem solved using WMP. Thanks for your expert advice :-)!

• Have lost the coloum on the left was next to the windows mail inbox cannot solve this problem help please

  Have lost the information column on the left side of my page of the Inbox, please help

  SE repair Vista and recovery Forum.

  On the view menu at the top, choose "layout... '. "and make sure that the list of"files"is checked, then the left side displays.

  

• satellite boot and recovery disk problem, help please...

  Hello

  Well, here's the question. My satellite is a few years old all of a sudden, she leaves the start. Gets the starting address windows xp mode then hangs and repeats the process. So I thought, well... I just install my recovery discs...

  Well well, thank you for a reason, and his frustration as what... I get an error of bad machine. Don't allow me to install my recovery disks. Call toshiba, they say my warranty has expired have to go pay a service representative... Arrgh...

  This was purchased new and this is the correct machine...
  Anyway... when I'm bad machine, I get:
  Failed installation aborted/a process!
  A:/>_
  I'm assuming, there is something I can type here to recognize my machine... Any ideas? Toshiba was no help. Or... If you have an idea how can I start this thing without recoery disks.

  Thanks in advance...

  Hello
  before anyone can say anything, I would be nice to know what type of laptop you have.
  Cause Toshiba has in the meantime changed the recovery process.

  Good bye

• File size problem - help please!

  I have an Officejet 6500 E709n series, which I use with Windows 7. I used it for several years very well, now for some reason when I scan a document to PDF, it comes out as a huge file. When I just scan a page, it comes out more 2 meg. It shows as not compressed, but I can't find all the parameters relating to compressingthe files. I need to be ready for the email, so it is a serious problem for me. Can someone let me know what happened? Thank you!

  Try the following steps:

  1. open the Solution Center application.
  2. click on the button of Document Scan.
  3. Select "Document in PDF format. Do not select the ' searchable PDF '.
  4. click on the button 'change settings '.
  5. Select the Type of output as 'black '.
  6. click on the 'Advanced settings', and then select the "output resolution" 200.
  7. click on OK. Click done.

  Now, try to scan and check the size of the file.

• Internet connection problem help please

  When I try to connect to the Internet it will not and when I click to troubleshoot the convenience store does not open. Also through cmd, I used fig icon and everything saying media disconnected

  You have McAfee?  The problem is only recently emerged?  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary.  There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as other listings of McAfee said since then, the application did not refer to his database of threats correctly. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• Driver problem help please

  Im having a problem with my laptop it says that I need to get this driver---> Intel Centrino Advanced-N + WiMAX 6250 and try to do it in the Device Manager but it says failed?

  Intel Driver Update Utility allows you to get the latest drivers for audio, network, other components:

  http://is.GD/jQGR7

• Adobe Acrobat 2.0 problem - help please!

  I had Adobe Acrobat Standard 2.0 works well for years (and it is quite appropriate for what I need for) until about 2 weeks ago, when it stopped. My OS is Windows 7. I uninstalled the software and reinstalled several times without result. When you create a pdf from a Word (my usual task with Acrobat) document, it starts the process and then reached a point where it freezes, and eventually I have to close the program. The progress window "Adobe PDFMaker" reached a point where it says: "convert to Adobe PDF...". "and then freezes. All advice and help to solve very much appreciated! Thank you, John

  If you have Windows 7 Pro or better you can try to use XP mode (assuming that you can always get it to Download Windows XP Mode from the official Microsoft Download Center ).

  For more information on the installation of Acrobat 7, see: error "Activation of server" unavailable in Adobe CS2, Acrobat 7 and hearing 3