I need help restoring iTunes from Time Machine

Similar Questions

• Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Fusion drive: restore from Time Machine - "the disc cannot be erased."

  Hello

  On a new iMac (end of 2015), I need to wipe my drive of Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition) and then restore a backup Time Machine (made on a previous iMac, also with disc Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition).

  According to the document from Apple: https://support.apple.com/en-us/HT204904 'restore from a Time Machine backup' I...

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 selected "backup restore Time Machine"

  3 selected my external backup disk, Time Machine

  4 choose the most recent backup

  5 selected "Macintosh HD" as a destination and click "continue".

  ... but then the following message appeared "disc cannot be erased.

  

  Then I tried to erase 'Macintosh HD' via disk utility:

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 choose disk utility

  3 choose "Macintosh HD"

  4. click on tab "delete".

  5. click on the button 'clear '.

  ... then I got the error message:

  "Clear process failed..." Details: Dismantling DIS3 - deletion of logical volumes of the logical volume group - cannot remove the basic storage logical volume. Operation failed... »

  I was in the 'loop', the only way out was to "Reinstall Mac OS X", and then after many hours, he had once again my old installation flubbed with everything I wanted to get rid of!

  How to restore my backup Time Machine - nothing more or less - to my new iMac?

  I lost 3 days now with this problem. I really hope someone has a solution.

  Thank you very much!

  Apple did not provide an easy way to recover from this condition. If you are not able to carry out these instructions, please someone more experienced to help you get. One option is to take an appointment 'Genius' on an Apple Store.

  Starts the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe.

  Note: You need an Ethernet or Wi - Fi connection permanent Internet to use recovery. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  In the OS X Utilities screen, select

  Utilities ▹ Terminal

  in the menu bar at the top of the screen, not one of the items in the OS X Utilities window.

  Follow the steps in this thread to ASC to split the fuser unit. The long string of letters, numbers and dashes you will need to enter will be different in your case. Copy and paste into the command in the Terminal window.

  This will remove all data from the fuser unit, then you had better be sure of your backups.

  Quit the Terminal, and then repair the Fusion drive (see "Troubleshooting" on the linked page.)

  Quit disk utility. Then you should be able to install OS X and restore your data from a backup in the main screen.

• Merger VMDK file after restoring from time machine recognized not

  Hello

  I'm having a problem with Fusion 3.1 recognizes no not my Virtual Machine copied from time machine. I did what I did and the below error code.

  Question: I just installed a new hard drive and performed a clean installation of Fusion 3.1. After that, I used time machine to restore my virtual machine to Windows 7 x 64 at the previous address. I then open vmware fusion and looked for the virtual machine and click Open. The virtual tried to start but I received the following error message:

  Could not open the file "/ users / / Documents/Windows 7 x64.vmwarevm/Windows 7 x64.vmdk ': the system cannot find the specified file.

  I checked the contents of the package, Windows 7 x64.vmwarevm and the file is there. I don't know why he is not recognized. I have attached a screenshot of the file hard text, text log file and the contents of the package.

  Thanks for your help.

  Dmillz80 wrote:

  WoodyZ - is there a way I can rebuild this section?

  If you can find the file "Windows 7 x 64 - s010.vmdk" within the structure of the backup folder Time Machine which is closest to you, you might get lucky, but really all depends on what exactly in this segment of the disc.  I use the find command in a Terminal to find this file because I do not think that you will find with Spotlight.  If you can find the file "Windows 7 x 64 - s010.vmdk", then in an attempt to at least be able to mount the drive with VMDKMounter in order to try to recover all the data, you can you can always replace the file "Windows 7 x 64 - s010.vmdk" with a segment of fake or another as duplicate file "Windows 7 x 64 - s011.vmdk" and rename it file "Windows 7 x 64 - s010.vmdk.  FWIW, it will really depend on exactly what was in the file "Windows 7 x 64 - s010.vmdk" about what you might be able to recover with VMDKMounter or even to start the Virtual Machine.  I actually had the results mixed in the past where only data could be retrieved and cases where all data have been recovered and in some of these cases, the Virtual Machine is bootable and in some not so it all comes down to what was in the missing segment.

  At this point you have nothing to lose and everything to win then to give a try.

• This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  Please correct this update security update 2016-001 El Capitan and security update 2016-005 Yosemite.

  My screen freezes during my login on my i - Mac!

  I tried 2 times with the same result. Restored my i - Mac 2 times!

  My iMac after this update of market with gray screen too, very bad update in safe mode.

• Photos say too old version after restoring from Time Machine

  I tried to update my wife 5 c's iPhone but iTunes (version 12.4.3.1) kept saying unknown error (-50). I read that a possible problem might be something on an xml file in the pictures with a conflict or missing. I thought that this might be a good time to try my first restore with Time Machine. I thought I would restore Photos only a few hours of this day. While I was doing that in the middle of the restore, Time Machine was trying to make it's hourly backup and I got an exclamation point saying that he was unable to save. After the backup is complete, I tried to open the pictures and it says "library old Version, please update your library 'Photos' using iPhoto free library upgrade available at Apple. So I downloaded the file .dmg and still nothing. I don't want even if an earlier version of Photos, I want to what I had and I thought of making a time Machine would be restore was supposed to get back to how I had it. My Time Machine works again but the new backup, he's trying to back up my photo library. I know because I recognize the size of the backups as being the same size as my library of Photos. I went about this Mac and checked the storage. He showed my disk as empty and my regular hard drive on my Macbook Pro (retina 13 "- beginning 2015") showed use of backup almost exactly the same size as my library of Photos. A few moments later my external drive shows correct usage, but big backup on my regular HD space always shows the same backup use suggesting that it stores my library as a backup, or at least that's my guess. One thing that I tried was the Option key pressed when opening pictures to try to select another library that I have an old migrated iPhotos library in my folder of photos I thought that maybe Photos was trying to open. As a side question I was wondering if I could remove the migrated iPhotos library as whenever I click on it, more or less said that he has already been migrated, he discovers in a compatible version of Photos. I hope that I have given all the good news. If I'm missing something I apologize. I'm under El Captain 10.11.6

  I thought I would restore Photos only a few hours of this day. While I was doing that in the middle of the restore, Time Machine was trying to make it's hourly backup and I got an exclamation point saying that he was unable to save. After the backup is complete, I tried to open the pictures and it says "library old Version, please update your library 'Photos' using iPhoto free library upgrade available at Apple.

  What did restore exactly the time Machine? You write "Restore Photos", indicating you restored the Photos app, but the error messages seem to apply to the photo library.  You have restored a library of old Photos?  If you restored the photo library, try to open it directly by double clicking it or dragging it to the Photos icon in the Dock.

• Impossible to restore a file from Time Machine

  I messed up a data file and tried to restore from Time Machine. It produces the message "the operation cannot be performed because you have not granted access to the Finances of 2016 VDJS. I use an iMac 2009 beginning running OS 10.8.5. I checked permissions, and since I'm the only person using this computer all read - write permission. The version of the file I am trying to use to replace the messed up one was recorded only a few days ago and should have the same permissions. I apparently can't use disk utility to verify or repair permissions on the time Machine if the problem is with the saved file. I have another backup using DropBox, but I organized "intelligently" so that it records the changes made to the files they are saved on the computer, if the vehicle has currently the messed registered version. Others have reported this problem as a result of this message on the permissions, but not in similar circumstances, while the situation I'm in.

  Start with E10 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• iMac in suspension after restoring from Time Machine

  Sorry - closed my previous thread by mistake then publish again for assistance:

  Hi - I had a late 2012 27 "IMac El Capitan 10.11.4

  A few days ago a reboot is required after (I think) an upgrade of the El Capitan, but the machine hanging after the reboot, showing a gray screen, a small circle in the middle with a grey diagonal line in the circle. Under the circle turning another circular graph which gives the feeling that I have to wait for the machine to do something.

  In any case, the machine was stuck in this mode then after a lot of messing around, I went for a full restore from Time Machine (which is held on a NAS). Everything seems to be going smoothly, taking 20hours. He said full restoration and did a restart, but I am now stuck on the circle of greg with the diagonal line through it again that does not heal a re-boot. Utility disk V13 (450) shows on the left:

  • Drive internal
    • Macintosh HD. I can select Macintosh HD disc and verify and repair run correctly. It shows 852 MB free space of 1.11 TB of capacity
  • Disk2
    • System basis of Mac OS x, check disk is fine. It shows 38.3 MB available 1.19 GB capacity

  Maybe some sort of thing disk permissions?

  Thank you

  Try to start in Safe Mode, as in > try safe mode if your Mac does not commissioning - Apple Support

• cannot restore from time machine

  MacBook pro 10.11.3 time machine backup data of the computer but cannot restore when entering time machine.

  When you select an item and click on restore, nothing happens?

  What you save up to? Some may not restore from a NAS device.

• Problem restoring from Time Machine complex

  BACKGROUND:

  I never tried to do a restore from Time Machine.

  PROBLEM:

  2009 iMac internal drive is unreadable. *

  Previously saved on Time Machine before the problem of disk internal.

  Replaced the internal drive with 500 GB ssd

  When I try to restore the iMac via Time Machine, after providing the Time Capsule password, I get the following error:

  "There was a problem connecting to the server"Xxxx - airport-Time Capsule.local.""  Contact your system administrator.

  When I try to connect the iMac to time Capsule, which sees the iMac, after providing the Time Capsule password, I find myself in the same place above.

  When I try to use the Migration Wizard, same result.

  * I am told by the technology that has installed the new SSD, the system on the old internal drive is corrupt... but the data files are always accessible if the old drive is installed in an external enclosure that appropriate connector and wiring.

  Then... :

  1. How can I check the Time Capsule password?

  2. What is the answer to ' there was a problem connecting to the server "Xxxx - airport-Time Capsule.local." "  Contact your system administrator. » ???

  3. what other methods can I use to restore the backup?

  1. How can I check the Time Capsule password?

  The password is fully accessible using a soft reset.

  Press the reset button on the TC 1 s (that is, between 1-3 s).

  All passwords will be at default for 5 min.

  You can access the passwords via airport utility... No other router in the world, it is so easy and, therefore, has such low security like the Apple.

  

  Everything is revealed.

  

  2. What is the answer to ' there was a problem connecting to the server "Xxxx - airport-Time Capsule.local." "  Contact your system administrator. » ???

  The correct answer is $$ @ # $% * (! TC darn stupid..!)

  There's a good chance you have permissions issues. This makes life that little bit more difficult, but all will be revealed.

  I highly recommend you plug the TC by ethernet on the computer and do a full factory reset on it... and then set it to the top of all operating system has been installed on the iMac.

  No files are lost on the hard drive and you will delete all the other problems.

  So if you can't access the backup, it really is a permissions problem.

  3. what other methods can I use to restore the backup?

  Connect the original on the Mac disk using a USB key on his birthplace of SATA. See if you can get your files directly from the original source.

  You can also do something similar... Buy a USB... format correctly in Mac extended if it isn't already... and connect it to the TC... didn't check the TC on the disk. In any case, it's a good idea to protect your backup. You have to start no new backups on top of the old before you get your files.

  

  Plug this drive into the iMac and set permissions... you can not do this TB... only with the drive connected locally. You should then be able to access the backup.

  Migration is the best way to make the transfer, assuming that you have loaded a new computer specific OS...

  Just be careful of issues using a different user or the same user as the original computer.

  See here the instructions of Migration... which are a little outdated but show details much more than what apple has documented.

  http://pondini.org/OSX/MigrateLion.html

  See also questions still arise.

  http://pondini.org/OSX/MigrationProblems.html

• is it better to restore from time machine or from a backup cloned

  I just got my replaced Mac hard drive. Of course, I did a backup first - two, in fact. One is my Time Machine stored on my Time Capsule backup. The other is a backup cloned, made with SuperDuper!, stored on an external hard drive.

  Now, the mac is back with it's all new hard drive, and I was wondering: is there an advantage to restoring from a backup vs the other? Is "Restore from Time Machine backup" a better option than with SuperDuper! to restore the clone bootable? Or vice versa? Or does really make any difference at all?

  Additional info: the TM and Clone were both looking at the same time (give or take a few minutes) and the Mac, at the time where it has been saved, ran the Mavericks. I also asked Apple to install the Mavericks on the new hard drive instead of El Capitan.

  Display?

  Thanks in advance.

  It really makes no difference that you are restoring from.

• InDesign crashes at startup after restoring from Time Machine

  I had to restore a backup Time Machine of yesterday. Everything works fine, all the other CS5 programs. InDesign does not start. I have setup a test user account and InDesign is working very well. Help! I reinstalled, deleted the prefs, no luck.

  Here's my crash report: http://pastebin.com/ztWPgVWC

  THE FIXED!

  I noticed "fetch...". "when I watched the permissions (I command) on a few files. Should say "tonyfletcher" my user name. Do not "get...". »

  This led me to this article: http://reviews.cnet.com/8301-13727_7-20121641-263/file-group-permissions-constantly-displa ying-extraction--os-x /

• Missing utilities after installing SSD and restoring from Time Machine

  Today, I installed an SSD on my mid-2012 13 "MBP (Mavericks running) and then ran the restoration of service Time Machine to bring back everything that I used. All right, except that now I have discovered that Time Machine never backup my Utilties like disk utility, same Terminal is missing.

  I have a bootable USB with the Mavericks installation app on it, but now if I run, it's going to destroy everything Time Machine has done to restore (my CC Adobe apps and plugins, for example)? I would upgrade to El Capitan, but I use an old Wacom which does not have the drivers for the last OS X, so I'm stuck for now (do not want to buy a new Wacom immediately).

  Any ideas on how I can get these dos utilities without using the re - install or upgrade process? I watched the old backups TM and they aren't there either.

  You will have to reinstall the operating system to get the dos utilities.

  Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• How can I copy files from Time Machine without going through Time Machine

  I had to do a clean OS X El Capitan on my iMac install because something prevented it from closing properly. I now El Capitan without any of my old files and applications.

  I want to copy my Time Machine backup, but the record has been marked by a red dot. I can't transfer manually. I don't want to go through a Time Machine, because the last time I did it, it just restore the old configuration that basically had the problem that stopped my computer of closing.

  How can I manually copy the files?

  Do not restore complete.

  You can 'enter Time Machine"to select files and folders to restore.

  Alternately, when restoring from Time Machine backup, customize the restoration as follows: under Select the information to transfer, select only your previous user account. Do not select 'Applications', 'Computer and Network Settings' or "Other files and folders". Deselect these choices. Potentially corrupt applications, lists of properties and changes in the operating system will be migrated and will be any problem that may have been caused by them.

• How to restore mail using Time Machine data

  Sunday my iMac that runs 10.8.5, had problems with Apple Mail. Email correctly loaded at 7:30 and was fine, but at 6:30 I opened the program to retrieve e-mail. The program crashed. I restarted the program and it quickly crashed again. After a 3rd reboot it crashed again. I restarted the iMac and when I tried to start the Mail, he acted as I've been setting up Apple Mail for the first time, wanting my e-mail address and password.

  I thought there is a data file that creates that so corrupted Mail, you can go back in time Machine and restore it. OSX does not allow me to change the Mail or restore from Time Machine, it gives me an error message that Mail is part of the OSX system and cannot be changed.  I have 5 email accounts that keeps track of the mail and so far it has only one account setup. I would like to restore all the email accounts to backup Saturday night before all this started.

  Is there a way to do this? Any thoughts on this is appreciated.

  John boubacar diallo

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  In Finder and hold the option/alt key while clicking on the menu item Go. Select the library. Then go to the Mail folder. Enter Time Machine and restore this file.

  If this does not work, there are additional e-mail folders in Library/Application Support, covers and containers.