Align the Group

Hello

How can I align a group of objects in the center of the artboard or elsewhere. RT now it aligns each object in the group toward the Center, but I need the group as a whole to be centered.

Kind regards

Frank

You have in fact the Group of grouped objects?

Commannd + G or CTRL + G, of course, you select all the objects first.

Select the group with the selection tool, and then choose alignn to the art Council. Should do the trick!

Tags: Illustrator

Similar Questions

  • Alignment of Group at the centre and at the bottom of the artboard?

    How can I align a group of shapes in the Center and at the bottom of the artboard? I select forms, group them and choose horizontal centering and vertical align the base, although nothing is happening.

    You must check "Align to the work plan" first of all, it is located in the lower right of the palette of transformation. If you don't see it, click on the fly on the menu and choose "options".

  • Scrolling group problem: not all the group with scrolling content?

    Helloooow peoplez script wise.

    I was biting my nails on this problem, the last two days and still have not found a solution. Go here:

    I tried to make a window (or Panel actually, because ultimately it must be run from the EI > window > scriptname.jsx), with a scroll bar, which can scroll content in a group beside him. I can get the scroll and all group, but is the problem, just now, that the elements of x in the group, the last get cut. Like this (it is supposed to be 500 buttons):

    Screen Shot 2015-10-13 at 21.40.05.png

    The only way that I was able to get the 'internal' group grow is by not using do not align properties and manually set the .size. I know that the content is here because the last element arises, when I move the last location of points [1] upwards until he reached the top of the group. I tried to refresh the page layout (layout.layout (true); layout.resize (()) to each call of the function onChanging() of the cursor, but without success. Read a lot of forum posts beautiful and discussion by @Marc Autret and other users of scriptUI/extendscript long has this far been without success.

    TL; DR: I'm doing a group with a lot of content that I can scroll with a scroll bar.

    Here is the code snippet, I hope fairly well commented:

    {
//scroller test
// uncomment the temp path (replace with some image file path) and the lines inside the populateGrid() function to reproduce my problem better
// I'm ussing an image 512x288 pixels


//var tempPath = "/Volumes/Verbinski/02_SCRIPTING/After_Effects/stockholm/ROOT/EXPLOSIONS/Fireball_side_01/Thumbs/Fireball_Side_01_024.jpg";


// create window
var mWin = new Window('palette');
  mWin.size = [500,500];
  mWin.orientation = 'row';


// If you like it, then you better put a scroller on it.
var scroller = mWin.add('ScrollBar');
  scroller.size = [20,mWin.size[1]-40]
  scroller.minvalue = -5;
  scroller.value = scroller.minvalue;
  scroller.maxvalue = 10000; // tried changing this to all sorts of interesting numbers.


//This should move the group, created further down.
scroller.onChanging = function(){
  grid.location = [grid.location[0],-scroller.value];
}


// "Boundary" for grid (see below)
var gridArea = mWin.add('panel',undefined,'gridArea');
  gridArea.size = [mWin.size[0]-40,mWin.size[1]-40];


// The grid... a digital fronteer... and also container of stuff
var grid = gridArea.add('panel',undefined,'grid');
  grid.size = [gridArea.size[0]-20,9000000000] // no matter how high I put this, it doesn't change a thing


// Just an array for all the images to go
var clips = [];
// Total height gets calculated in the populateGrid function.
var totalHeight = 0;


function populateGrid(rows){
  var img;
  for(i=0;i<rows;i++){
  // img = grid.add('image',undefined,tempPath);
  // clips.push(img);
  grid.add('button',undefined,i);
  }
  for(i in clips){
  clips[i].location = [0,(clips[i].image.size[1]*i)]
  }
  // totalHeight = (img.image.size[1]+grid.spacing)*rows;
  // grid.size = [grid.size[0],totalHeight]
  // scroller.maxvalue = totalHeight/2;


}


// put x number of buttons/images into the grid
populateGrid(500);


// shwo to window
mWin.show();
mWin.center();
}

    Reaally hope someone here sees this and can help out me.

    Cheers, Fynn.

    My Control Panel:

    retina 5K, 4 GHz Intel Core i7 iMac

    32 GB of RAM, 512 GB SSD HARD drive

    OSX Yosemite: 10.10.4

    AE: CS6 |  CC 2014: 13.1.1.3

    Aaalrighty, guys. It seems to me have cracked... Sort of...

    David, your version worked quite well, I just modified a bit to get the right calculation.

    The wheel now works as expected and the scroller.maxvalue is calculated as ((number of items) * height of the first item).

    Everything works fine until I have started using the automatic layout manager. The option 'fill' at least makes it really hard to understand the final height of the internal objects. So they must be defined accordingly.

    Indeed, here is my modified code (sorry, @David for resources according to the version string, you may simply copy the scroller.onChanging () and populateGrid() x parts))

    {
//scroller test
// I'm using an image of around 512x288 pixels

var tempPath = "YOUR IMAGE HERE";

// create window
var mWin = new Window('palette');
  mWin.size = [500,500];
  mWin.orientation = 'row';

// If you like it, then you better put a scroller on it.
var scroller = mWin.add('ScrollBar');
  scroller.size = [20,mWin.size[1]-40]
  scroller.minvalue = 0;
  scroller.value = scroller.minvalue;
  scroller.maxvalue = 3000; // tried changing this to all sorts of interesting numbers.

//This should move the group, created further down.
var scrollDiary = 0;
scroller.onChanging = function(){
  var scrollVal = Math.abs(scroller.value)-scrollDiary;
  for(i=0;i

  • How do I Center Align a group of layers?

    0 down vote favorite

    I work with Photoshop and make a java script file to automate Photoshop.

    But I can not find a method to center align the layer according to a document.

    For example I have a psd file in which layer five are horizontally side by side to side, I remove the third layer now there is an empty space against this layer, now, I want the fourth layer comes to the third place and the fifth to fourth place and all these four layers of center line according to a document.

    What is the shortest and simplest solution to this problem?psd.png

    Here's a script that are contiguous and centre of a group of layers. This script has no error checking, if you need to add that, if you wish. To use this script, you must have all of the layers that you want centered and aligned in a group. You must have this selected group when you run the script. The layers will be aligned in the order that they are in the the layer stack, so if you want to rearrange the positions, you must reorder the layers. You must either create a user interface to set the vertical height (in percentage) or you need to modify the script and enter the desired value. You can also modify the script so that it aligns all layers to the first layer. Right now it aligns the layers to 20% of the height of documents.

    #target photoshop

var doc = activeDocument;
app.preferences.rulerUnits = Units.PIXELS;

var vertPos = 20;// percent location top of layers to top of document
var layerArray = new Array();
var layersTotalWidth = 0;
var layerGp = doc.activeLayer;
var docCenter = doc.width/2;

for(var i=0;i

  • Align the largest object of two objects

    Hello

    Let me explain with an example. Suppose I have two horizontal lines spaced 1 in. I have a square box with sides 2 inches wide. I would like to focus the housing vertically between the two horizontal lines. Is there a quick way to do this without grouping?

    A way of centering the box is horizontal lines of group two in an object, and then align the box in the middle of the group object. But I would like to know if I can do it in fewer steps without grouping. If the box was smaller that 1 in., about I could place the box between the two lines, select all three objects (box + two lines), and distribute the portrait. Alas, the box is larger than the space between the two horizontal lines, so it does not work.

    This is for CS4.

    Thank you.

    sPretzel,

    I am afraid that grouping is the easiest and simplest. There are of course other ways (worst).

  • align the JLabels and JTextFields vertically in different areas

    I have 3 TitledBorders to 3 different areas of my frame.
    Each region has its own components - JLabels, textfield, etc..
    How to align the JLabels and JTextFields vertically in different areas?
    for example, for the following test program, how to configure label1, label2, label3 so that their right sides all align them vertically and
    TF1, tf2, tf3 so that their left ribs all line up vertically?
    import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.GridLayout;
import java.awt.Insets;

import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
import javax.swing.border.TitledBorder;

public class TitledBorderDemo extends JFrame {
  public TitledBorderDemo() {
    super("TitledBorderDemo");

    JTextField tf1 = new JTextField("hello", 6);
    JTextField tf2 = new JTextField("hello", 12);
    JTextField tf3 = new JTextField("test");
    JTextField tf4 = new JTextField("test2");

    JLabel label1 = new JLabel("1234567890ertyuiyup label");
    JLabel label2 = new JLabel("zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz long label");
    JLabel label3 = new JLabel("short label");
    JLabel label4 = new JLabel("test");

    JPanel panel_tf = new JPanel(new GridBagLayout());
    JPanel panel_pf = new JPanel(new GridBagLayout());
    JPanel panel_ftf = new JPanel(new GridBagLayout());
    
    GridBagConstraints constraints = new GridBagConstraints(0, 0, 3, 3,
            0.0, 0.0, GridBagConstraints.WEST, GridBagConstraints.NONE,
            new Insets(10, 10, 10, 10), 0, 0);

    constraints.gridx = 0;
    constraints.gridy = 0;
    constraints.gridwidth = 2;
    constraints.anchor = GridBagConstraints.WEST;
    panel_tf.add(label1, constraints);
    
    constraints.gridx = 2;
    constraints.gridwidth = 1;
    constraints.anchor = GridBagConstraints.EAST;
    panel_tf.add(tf1, constraints);

    constraints.gridx = 0;
    constraints.gridy = 1;
    constraints.gridwidth = 2;
    constraints.anchor = GridBagConstraints.WEST;
    panel_pf.add(label2, constraints);

    constraints.gridx = 2;
    constraints.gridwidth = 1;
    constraints.anchor = GridBagConstraints.EAST;
    panel_pf.add(tf2, constraints);
    
    constraints.gridx = 0;
    constraints.gridy = 2;
    constraints.gridwidth = 2;
    constraints.anchor = GridBagConstraints.WEST;
    panel_ftf.add(label3, constraints);

    constraints.gridx = 2;
    constraints.gridwidth = 1;
    constraints.anchor = GridBagConstraints.EAST;
    panel_ftf.add(tf3, constraints);

    constraints.gridx = 3;
    constraints.gridwidth = 1;
    constraints.anchor = GridBagConstraints.WEST;
    panel_ftf.add(label4, constraints);

    constraints.gridx = 4;
    constraints.anchor = GridBagConstraints.EAST;
    panel_ftf.add(tf4, constraints);


    panel_tf.setBorder(new TitledBorder("JTextField1"));
    panel_pf.setBorder(new TitledBorder("JTextField2"));
    panel_ftf.setBorder(new TitledBorder("JTextField3"));

    JPanel pan = new JPanel(new GridLayout(3, 1, 10, 10));
    pan.add(panel_tf);
    pan.add(panel_pf);
    pan.add(panel_ftf);
    this.add(pan);
  }

  public static void main(String args[]) {
    JFrame frame = new TitledBorderDemo();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.setSize(600, 450);
    frame.setVisible(true);
  }
}

    I forgot how tedious GBL can be straight out of the box, since I usually use a helper class that I wrote for the work of constraints (a common approach).

    Anyway, here's a sample program ussing the technique I described previously. Note the horizontal on the panels of 1st and 3rd spacers that are used to "take out" the text fields so they line up on the left with the text of Group 2 field. I also added some glues at the end of these panels to make each Panel to fill in the same width.

    import java.awt.*;

import javax.swing.*;
import javax.swing.border.*;

public class TitledBorderDemo extends JFrame {
  public TitledBorderDemo() {
    super("TitledBorderDemo");

    JLabel nameLabel = new JLabel("Name");
    JTextField nameText = new JTextField(20);

    JLabel addressLabel = new JLabel("Address (City & State)");
    JTextField addressText = new JTextField(40);

    JLabel phoneLabel = new JLabel("Phone");
    JTextField phoneText = new JTextField(20);

    int longWidth = addressLabel.getPreferredSize().width;

    GridBagConstraints constraints = new GridBagConstraints();

    //--------------------

    JPanel p1 = new JPanel(new GridBagLayout());
    p1.setBorder(createBorder("Name"));

    constraints.gridx = 0;
    constraints.gridy = 0;
    constraints.anchor = GridBagConstraints.EAST;
    constraints.insets = new Insets(4,6,4,6);
    p1.add(nameLabel, constraints);

    constraints.gridx = 1;
    constraints.anchor = GridBagConstraints.WEST;
    p1.add(nameText, constraints);

    constraints.gridx = 2;
    constraints.anchor = GridBagConstraints.WEST;
    constraints.fill = GridBagConstraints.HORIZONTAL;
    constraints.weightx = 1.0;
    p1.add(Box.createHorizontalGlue(), constraints);

    constraints.gridx = 0;
    constraints.gridy = 1;
    constraints.fill = GridBagConstraints.NONE;
    constraints.weightx = 0.0;
    p1.add(Box.createHorizontalStrut(longWidth), constraints);

    //--------------------

    JPanel p2 = new JPanel(new GridBagLayout());
    p2.setBorder(createBorder("Address"));

    constraints.gridx = 0;
    constraints.gridy = 0;
    constraints.anchor = GridBagConstraints.EAST;
    constraints.insets = new Insets(4,6,4,6);
    p2.add(addressLabel, constraints);

    constraints.gridx = 1;
    constraints.anchor = GridBagConstraints.WEST;
    p2.add(addressText, constraints);

    constraints.gridx = 2;
    constraints.anchor = GridBagConstraints.WEST;
    constraints.fill = GridBagConstraints.HORIZONTAL;
    constraints.weightx = 1.0;
    p2.add(Box.createHorizontalGlue(), constraints);

    constraints.gridx = 0;
    constraints.gridy = 1;
    constraints.fill = GridBagConstraints.NONE;
    constraints.weightx = 0.0;
    p2.add(Box.createHorizontalStrut(longWidth), constraints);

    //--------------------

    JPanel p3 = new JPanel(new GridBagLayout());
    p3.setBorder(createBorder("Phone"));

    constraints.gridx = 0;
    constraints.gridy = 0;
    constraints.anchor = GridBagConstraints.EAST;
    constraints.insets = new Insets(4,6,4,6);
    p3.add(phoneLabel, constraints);

    constraints.gridx = 1;
    constraints.anchor = GridBagConstraints.WEST;
    p3.add(phoneText, constraints);

    constraints.gridx = 2;
    constraints.anchor = GridBagConstraints.WEST;
    constraints.fill = GridBagConstraints.HORIZONTAL;
    constraints.weightx = 1.0;
    p3.add(Box.createHorizontalGlue(), constraints);

    constraints.gridx = 0;
    constraints.gridy = 1;
    constraints.fill = GridBagConstraints.NONE;
    constraints.weightx = 0.0;
    p3.add(Box.createHorizontalStrut(longWidth), constraints);

    //--------------------

    JPanel panel = new JPanel(new GridBagLayout());

    constraints.gridx = 0;
    constraints.gridy = 0;
    constraints.fill = GridBagConstraints.HORIZONTAL;
    constraints.weightx = 1.0;
    panel.add(p1, constraints);

    constraints.gridy = 1;
    panel.add(p2, constraints);

    constraints.gridy = 2;
    panel.add(p3, constraints);

    this.add(new JScrollPane(panel));
  }

  private Border createBorder(String title)
  {
    TitledBorder b = new TitledBorder(title);
    b.setTitleColor(Color.RED.darker());
    return b;
  }

  public static void main(String args[]) {
    JFrame frame = new TitledBorderDemo();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setVisible(true);
  }
}

  • Align the STROKE problem

    Dear all,

    I created an art brush two colors that I use to add a stroke to a path that is not closed (it's just a bandaged line). However, I hold out to be inside the line (the alignment of race options are grayed out). Is there anyway to control the alignment of a line on a path not closed?

    In addition, the projecting cap option does nothing, but I need the race to throw a little.

    Any help is greatly appreciated.

    Alex

    Drag the brush in the brushes Palette and drop it on the artboard. This will be a group. The object the most backward in the group will be the invisible rectangle. Select and change with the white pointer. Then select the entire group once again, AltDrag it and fall back into its place in the Palette shapes. The brush will be updated.

    JET

  • Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

    I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

    Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

    Hello

    To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

  • Move the group between several windows tab

    Is it possible to use the function "Move to the group" from the contextual menu to move a tab from one window in a group of existing tab to a different window?

    By default, Firefox does not show me my groups of a window in the other window.

    Thanks for your help!

    Robert

    guigs2 said

    Use tab groups to organize a large number of tabs is what I have, and that's what I could find in Add ons: https://addons.mozilla.org/en-US/fire.../?src=search
    It seems that currently, it is not a feature of the right click menu in Firefox.

    Thank you. It seems that this feature will never be made the devs plan to remove the feature of Panorama of the heart.

    Bugtracker: https://bugzilla.mozilla.org/show_bug.cgi?id=836758

  • How can I put several addressed in a 'group' that I can send using the group name?

    I have an address book and you can send an email to several at once by adding each in hand and the cc or BCC fields. As I often do, I need to 'collect' in a group, so I can use the name of the group to send to several people.

    _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

  • Disable the group messages

    My group of messages has been turned OFF and yet I keep getting responses from people outside the message.  In other words, my mother's iMessage me.  It will look like that just only my mother until I get a text separated from someone else, that she sent the Group message.  Then... My texts do not arise in the form of group messages, but I get RESPONSE of EACH and their.  I end up getting texts from 1 million foreigners and answers to everything from everyone.  How can I stop this? Someone please help - it is becoming so annoying!

    This is because your mother included you in a text for the group. You have no control over this. Separate responses are because they always have you included in the created group your mother. Your mother needs to withdraw from the draft of the group.

  • with Thunderbird, the name of the sender of my yahoo groups no longer put up, but it is rather the name of the Group

    It started on May 11,

    1. go in any position of the Group
    2. on the email itself, right-click on the name of the group in the column 'from '.
    3. click on "edit contact".
    4. click on 'change details '.
    5. make sure that "Always prefer full name on the message header" is checked.
    6 remove the display name, so it's empty.
    7. click on 'OK '.

    That should do it.

  • I have a large group of students to the text but I don't want these numbers shared by the group that I can bcc texts?

    What is the community for my question? Students enrolled in a course using their cell #s and I want to text them as a group, but I don't want the numbers shared by the group.

    No ITC in Messages

  • I don't get any messages I send to discussion groups. The message is sent to everyone in the group, but me. Why?

    do not receive any messages sent to the group. It may be a problem with gmail. messages sent by me are not returned to me

    Gmail offers aggressive spam filtering. Can you check if the messages can be in a junk folder or if you can fine rune of all rules for messages on your behalf (a lot of spam is sent with your own address as the sender inserted)?

  • align the cells with shared values

    3.6.1 the numbers

    I would like to compare two columns and align the cells, if they are equal. Ideally, I would like to include the adjacent cells in the second column in the alignment.

    Example:

    Run the formula (if possible) to format the following text:

    As follows:

    Hi cnickflight,

    Easy to do by transferring the data to another table.

    Table 1 contains the original data. I reduced the names of fruits to three letter codes to reduce type them, but this does not change the process.

    Column A of table 2 contains a formula that copies the existing data in column A of table 1 and insert null strings when there is no data in the table 1.

    The formula is entered in cell A2 and filled down.

    Table 2::A2: = IF (ROW () −1 > COUNTA (table 1::A),"', SHIFT (table 1::$A$1,ROW()−1,0))))

    Fill until the end of the column.

    Columns B and C contain a VLOOKUP formula. The formula is the same in the two columns, with the exception of the number indicating which column of the table, the returned value must come. The version of 'testing' of the formula in B2 is shown. When filled to the bottom, this formula should copy the names of fruits where they are both on the table 1, in the line that they appear in column A, and display a triangle of error in the lines where there is no name in column B to the one in the column (and in the rows where column A is empty). The error message for each of them should be "VLOOKUP couldn't find the requested value."

    Table 2::B2 (trial version): = VLOOKUP ($A, table 1: $b$ C, 1, FALSE)

    (FALSE appears in the formula as 'exact match' editor)

    If the behavior is as described, add IFERROR before VLOOKUP, and , "") after the closing parenthesis to match the 'final version'. " (See "why two versions? below.)

    2::B2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,1, FALSE),' ')

    2::C2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,2, FALSE),' ')

    Fill both until the end of their respective columns. Results should now be as shown above.

    Note: Why two versions?

    Function SIERREUR is ideal for use as a trap for the error, but it acts on all errors, not only the one you plan to trap. Best practice is to add to this trap only if you are sure that the formula generates other error messages that awaits you and using in this case we know VLOOKUP, who has been charged with finding an "exact match" will throw an error when it does. Function SIERREUR catches this error and puts a string anywhere in the cell, making it appear empty.

    Kind regards

    Barry

Maybe you are looking for