Keypad will Flash only on appeal. difficult to use the digital menus
Ive found that 95% of the time when I am in a call, the dial pad starts flashing. Fading in and out. It's really hard when you wanted to access it during a call as for these digital menus. Press 1 to push blah blah blah blah 2. where is the one that says stay on the line if your droid won't let you push a button?
I think this thread is on the sensor.
It is in the upper left corner of the screen. All touch screen phones have a similar model, designed to detect the proximity of the face and the vacuum screen out so the face is not accidentally touch the screen and cause something happens. Why the behavior is different in speaker, is that the proximity sensor is off... which would put a speaker directly to their ear.
So... If the screen does not load make sure that the area of the sensor is 2-3 inches of skin and not blocked by hair or clothing.
If the screen fails to unblank (quickly)... Make sure that the thumb or finger is not close, even on the side of the upper left corner.
To better understand the sensor, try this:
Make a call
Put the phone on a table
Slowly move your hand down to the screen... about 3 "of the phone, the screen should blank.
Place your hand back. the screen should unblank and be ready for use.
Try this with a few fingers and a finger near the sensor.
If this does not work... the phone is defective.
Now, pick up the phone in the way that you usually do. Did the test to white phone? Move this finger. If this isn't the case, hold the phone in your left hand with your thumb on the side. It move a bit on the edge of the phone as you could if you were in a call. Did the empty screen? Now, you know, do not hold the phone like that. :-)
Tags: Motorola Phones
Similar Questions
-
I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, although the only files I have to use the old are the .xml, .itl and current music files. Is this enough information to do it, and if so, how should I do?
I lost the other information by following the instructions found online of other attempts. I have unfortunately seem to have lost all that concerns my old library with the exception of the foregoing. I have been using an external hard drive to make this attempt. When iTunes opens it is empty, and when you try to import the .xml I only get playlists, although there is nothing inside of them. It would not be the end of the world for me to start all over again, I've not lost music files, but loading in my all of my old info is much, much, much more desirable. Thank you!
I'm sure that the sides are stored with the file of 80%. (wav mp3/4 whatever)---> or at least the should be!
Just install itunes.
Copy the contents of your old folder in the itunes directory and start itunes--> it will do the rest.
PS...
However, I wouldn't bother with itunes more... windows media player is pretty cool in 7, does all the same things.Personally I stick with the purchase of CD (mp3 downloads are a rip off)
'Cool' apples, however, is not it... and what would we do without our podcasts (what happened to the embedded html objects I don't know) computer nerd who serves the grannies
-
My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.
You must connect prove you are currently subscribed.
-
Printer will be only woek when I disconnect from the Internet
Original title: I have a HP Deskjet 3050 a J611 printer all-in-one. Wireless also. I had plugged in my computer on another wireless service, but since I changed it does not connect to the online services service
I have a HP Deskjet 3050 a J611 printer all-in-one. I had plugged in my computer that was on an internet service. I changed my service and now the printer
join the network only when I unplug the printer from the internet and click on connect to the printer?
E-mail address is removed from the privacy *.
Hello
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.Sound like a hardware issue-setting up the printer using the HP installation methods.
HP - DeskJet 3050 a - Product Support and troubleshooting<- set="" to="" your="">->
http://WWW8.HP.com/us/en/support-drivers.htmlHP - DeskJet 3050 a - drivers<- set="" to="" your="" version="" of="">->
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5061082&LC=en&cc=us&DLC=en&lang=en&cc=usSupport HP & drivers<- search="" driver="" for="" your="" model="" and="" then="" put="" in="" windows="">->
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/======================================================
The main issue is probably hardware or drivers but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Why my text will appear on my photo when I use the text tool?
Using the horizontal type tool I can do a text box, but no text - the flashing light appears in the box and when I type any text will not appear. Although, in the layers of the right side panel, he named the layer what I typed then why it will not appear on the photo? Even if you do all of the other layers invisible text layer still does not appear on a white background.
Help, please! My only other option I can think about is text transfer in other locations. Then I need to erase all white space around the text and its super boring.
Select the text tool and try a reset.
-
Difficulties to use the swf file that is hard-coded to display flv files
Hello
I created a swf player using the flvplayback component to display flv files. The document in flash is 275 pixels wide by pixels long 130px. I also have my video component (flyPlayBack) set to 275px by 100px to display the playback controls. My flash code this is my simple as follows:
Fl.video import. *;
var myflashvars:Object = new Object();
myflashvars = this.loaderInfo.parameters;
var fullVideoPath:String = "";
(point var: string in myflashvars)
{
If (point == "filename")
{
fullVideoPath is myflashvars [point];.
}
}
videoPlayer.source = fullVideoPath;
So, using the above it should play the video and made.
(1) the first question is that I tried to play 2 different videos in my html code.
< object classid = 'clsid:d27cdb6e-ae6d-11cf-96b8-444553540000' codebase =' http://download.Macromedia.com/pub/Shockwave/cabs/Flash/Swflash.cab#version=10, 0,0,0 'width = ' 275' height = "130" > < param name = "allowFullScreen" value = "true" / > < param name = "movie" value = "moviePlayer.swf" / > " < param name = 'wmode' value = 'window' / > < param name = "scale" value = 'showall' / > < param name = "of the flashvars value ='filename = sample_sorenson2.flv" / > < embed width = '275 "height ="130"allowFullScreen ="true"type = ' application/x-shockwave-flash' src =' moviePlayer.swf"pluginspage =" http://www.Macromedia.com/go/getflashplayer 'wmode = "window" scale = "showall" flashvars =' filename = sample_sorenson2.flv "/ > " < / object > Just like above works fine. But I tried to play 2 different videos, the first video image is less than
The second video is less than
I noticed the video formats are different, but not the size of the video player, is - do a thing called elongation? Is it possible to change this by using my simple actionscript code above?
(2) I also tried the button full screen, but the video takes a part of the screen, as shown below. Sorry for the size of the image.
It is a common occurrence, is it possible to access the buttons of the flyplayback instance using actionscript and overridding the behavior? Any advice on my situation would be very much appreciated. Thank you.
For me the first two screen captures look like you set bad size l / h/screen. I don't see any scaling of the player at all... only the black bars on the sides because the video did not fill the video player display together.
And Yes, there are way to display Flash video NetStream, much more powerful and versatile called. You can design your own player and better control the display. I always use NetStream rather than the FLVPlayback instance.
But if you're having sizing issues presented during the creation of the video... then the drive itself will not necessarily fix it. You need to know the correct display size and the report l / h for each video that you want to display.
However, you can adjust slightly the size of the screen for each video using some actionscript... as you see here:
http://www.cataractvideo.com/CV/physicians/cataract_surgery.html
an example of a larger version (high brandwidth) and a smaller (low bandwidth) version... According to the button you click.
More about NetStream:
http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/NET/NetStream.htm l
Here's a good tutorial on building your own video player NetStream:
Scroll all the way down the page "Video Basics.
Good luck!
Adninjastrator
-
I live in Indianapolis and only 5 school are listed in my city. But it is very difficult to use this rebate if your school is not listed.
Hi Magseven,
If you try to apply your student discount on a purchase on the Online Store from Microsoft, use the phone number for purchases and questions at this link.
-
Last downloaded Update Flash, Windows says it can't use the path of the file
I have Win 7 Starter on a net book, and my user is administrator. I never had problems to install Adobe Flash, because it normally takes care of itself as soon as I get the update process.
During the week, I tried to update Flash Player several times. I am angry.
I have download the binary file and it is 1 MB in size (is this correct when the download page says that it's going to be 17 MB?), I try to execute the binary file only to receive a local saying "Windows cannot access the specified path, device or file. You can not have the appropriate permissions to access the item.
The .exe file does not have the usual Adobe icon, only a generic file icon.Also, when I'm on the Adobe Web site, on the Flash download page, I have to repeatedly re - authorize the computer to 'use' the version of Flash that is temporarily installed and I do not know if it is originally a kind of problems with downloading. It takes a few minutes to get even the page to spit the file because Firefox blocks Flash blocking Adobe.
How do I just update Flash?Honestly, the easiest solution is to use Google Chrome. Flash Player is a built-in component, so there is nothing to download or update.
Offline installers could get you off the ground here:
Internet Explorer:
http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe
Firefox and other NPAPI browsers:
http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe
-
Flash Pro CC crash when you use the pencil, Brush tool
Hello
I bought the full package of CC and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when I use pencil and Brush tool.
When I use the selection tool the selection is not in the right place. program feels weird.
IM using latest version
running windows 8.1
lastest flash and air and graphics drivers.
IT hangs just does not show even a mistake just benggg has stopped working.
Can someone help me?
Greatzz
solved
I was having the same problem and found the solution from Adobe.
Go to the Control Panel - hardware and audio - display-
change the size of the text for the smallest a 100%
Restart the OS and start adobe flash
I hope this will help you
-
Need help please, I can only see outlines when I use the tool shape in CS5?
When I open the 2 or 3 action script in CS5 and draw a rectangle or any form, I see only outlines? The problem IS NOT the outlines button which is in the palette layers, because I changed several times and he has mad no difference and it'S NOT because I've selected no fill, or color of the shape.
If you want to see a screenshot of my computer follow this link that I have exactly the same problem
BUT Interestingly, when I opened someone elses .fla working paper, I can draw and fill out forms without problem, which makes me wonder if I am missing some basic settings when I start with my new document?
Any help would be appreciated. I'm quite familiar with Photoshop but a beginner in Flash
I learned something new, given the display you point on that might help - it has the same effect as using the tool outline on the layer, but throughout the world. In the main menu, select view-> Preview Mode-> and nothing, except the contours.
-
My ipad pro will not change to the horizontal when I use the Pixlr app. It works in other applications. I already have the power off screen lock in the settings.
Contact support Pixlr from the link on this page > https://itunes.apple.com/us/app/pixlr-photo-editor-for-collages/id526783584?mt=8
-
There is only one drive when you use the recovery on the Satellite L series disk
Hi, I just reformat and reinstall windows using the toshiba recovery disk, before this fitness, I had 2 drives, drive C and drive D, theres now only one C drive.
Also when I press the SHIFT key and simultaneously press the key with 2, trying to type "to the rhythm of the sigm" that is used for e-mail messages that she address types "" "(ouvrir invertated signe de coma)."
can someone pleasesee you soon
Hello
OK the first issue should not be a problem. If the recovery does not create a partition which is normal and ok. If you want your second partition to a partition Manager (just google for "partition manager") at the time and re-partition your hard drive. That's all.
Regarding your "" "problem: could you explain again what you want?" I mean when I type 'Shift + 2', then I get ", whereas the problem?"
Welcome them
-
Difficult to use the outputs analog to generate a predetermined file
Hey all,.
I tried to produce a file predetermined to a 1 kHz on my USB 6343 Multifunction DAQ analog output channel.
Here are the questions I have am experiencing:
1: output file so fast my o'scope cannot even pick it up.
2: when you try to stop the output it almost freezes.
3: my graphical waveform data and the plot does not update with the data that have been read.
If someone wants to tackle one or more of these questions, I would be very appreciatve.
Thank you
Kassandra
kashi13 wrote:
I tried to adjust the "DAQmx Configure Ouput buffer" but it really doesn't seem to have much effect. Do you think I should try a loop For to pick an amount predetermined points then output them quickly?
It's weird. So I don't generally need to use the function of output buffer configuration you have. If you look at using the Subvi DAQmx Timing just after it, you will see the samples per channel will help determine the size of the buffer. You might want to try do not use the function of buffer output set at all, not that I don't know if that will fix it or not.
-
Flash does not load when you use the standard account in Windows 7
I use the latest version of Flash on IE9 RC and on some sites, while that connected to Windows 7 (64-bit) as a standard user, does not Flash, but if I go to my Windows 7 Administrator account and go to the very site where the content Flash won't load, it does not load.
It's Fancast.com on IE9 RC connected with my standard account of Windows 7:
http://img695.imageshack.us/i/20110224093054.jpg/
It's Fancast.com on IE9 RC connected with my Windows 7 admin account:
http://img403.imageshack.us/i/20110224093021.jpg/
I tried to uninstall and reinstall Flash and disabling hardware acceleration, but nothing happens.
Flash sites like YouTube videos, no matter which account I'm connected to.
Also, when I go to NESN.com on IE9 RC in standard mode, content Flash does not load: http://img684.imageshack.us/i/20110224092957.jpg/
It started happening yesterday when I upgraded to Windows 7 (64-bit) SP1. I don't know if that has anything to do with it, but it was the last major change made to my system.
Post edited by: A340-600 - Edit to add correct link.
It's a matter of current Flash, here is your answer
-
Program key flashes only and does not appear on the toolbar
The 'key' does not appear in the toolbar, and so the Tools menu are not visible.
Lucette.Hi RobertDunkerley,
1. are you referring to a third-party toolbar installed on IE?
2. when the problem started?
3. have you made changes on the system?
If you are referring to any third-party toolbar menu, then you can uninstall and reintall the toolbar.
You can also read the following article and see if it helps:
Customize the Internet Explorer toolbars
Hope this information is useful.
Maybe you are looking for
-
I have no question... just an observation. I just took my ear dryer Flash pods. Also, they went through a full wash cycle. They still work despite a kinky twist in the wire. So with my test not planned, I find that they are watertight. Thank you Appl
-
Some login pages get 404 or 403 - very well in other browsers
Hiya', people! Well, I did some research to find answers before deciding to ask my question - just to put it out there. Found a few things that seemed on the surface to be bound, but then, as I read the posts, determined that they were not. I therefo
-
How to add additional language dictionaries to messenger on iPhone 6s? I need to send messages in multiple languages and automatic correction and suggestions work well with me. I am aware that I can turn off the AutoCorrect feature, but prefer to ope
-
where should I send my Tablet for warranty repair
Where should I send my Tablet for warranty repair
-
How can I connect to my cell phone? It's a touchscreen Samsung with Cricket service.
I have Cricket service with the web and want to use it on my laptop. My phone is a Samsung touchscreen and I want it pair with my laptop, so I can use the web of cricket which is on my phone with my laptop?