Alignment of the label fast?

Similar Questions

• Alignment of the label

  I have four check boxes. The user wants to first on his own line and the other four on the next line. The first has a long label, the others have a single word labels. I can't have the second line of four to align directly under the label of the box above. Line up the labels themselves. I'll try to imitate below, although I realize that sometimes spaces do align well in this message box...
  
  That's what I want:
  
  This is the label for the first box X
  2 X 3 X 4 X 5 X
  
  
  That's what I have:

  This is the Label for the First Checkbox    X
                                                  two  X    three X    four X    five X

  or, with the label aligned to the left

  This is the Label for the First Checkbox    X
  two                                                  X    three X    four X    five X

  Thanks in advance,
  Alexandra

  I'll take a look at the "quick fix" you sent... Thank you!

  Does not work: applies only to the boxes in a single element.

  I'm assuming that these boxes are the first/only on a line? Otherwise I don't think it would be so difficult... but the layout of the APEX form engine has a particular quirk: the label for the first part of the line still occupies a cell of table in itself. We can't get anything other than this single label in there, and that's causing your problem.

  There are probably a number of ways to work around that. Because it's brands that are the cause of the problem, it must end with integrated labels.

  1. create your own labels in the Pre element for each item text:

  This is the Label for the First Checkbox
  

  substituting P22_YN1 with the name of each element (see the label corresponding to the terminology models).

  2 remove the labels of items and the label template for each element of the value Label No.

  3. set the display properties for the first box:

  Start on a new line: Yes field: Yes

  and for others, to:

  Start on a new line: No. : No.

  4 set the message for the first item text box:

  This approach puts all checkboxes in a form table cell. It will also work with them in separate cells by changing start it on new line... The field of values, defining a ColSpan for the first and losing the < br / >.

  In this way don't play nice with the validation messages online. If this is a problem, then a different approach is called for. Creating mock objects at the beginning of lines...?

• Alignment of the label to mobileiconitemrenderer

  I have a custom element rendered for a list in an application to run on android and finds it difficult to get the label ' ' to align in the Center.

  The code is;

  override public function set data(value:Object):void {}

  If (value! = null) { }

  Super.Data = value;

  setStyle("fontSize",18);

  If (value.assigned) { }

  Label = "[ASSIGNED YOU]."

  setStyle ("textAlign", "Center");

  }

  else {

  setStyle ("color", 0xFFFF00);

  Label = "[PRESS TO ACQUIRE]."

  }

  height = 150;

  iconWidth = 75;

  iconHeight = 75;

  iconFunction = getIcon;

  messageFunction = getMessage;

  }

  }

  The colors and the fontsize appear to work well, but the label remains aligned to the left. I also tried to set the alignment in the list that is the owner of the converter.   Any ideas?

  It looks like you use a preview version very soon.  MobileIconItemRenderer has been renamed to IconItemRenderer, and it seems to work for me, the final version of Flex 4.5:

  one

  two

  three

  override public function set data(value:Object):void {}

  Super.Data = value;

  If (! data)

  return;

  If (data == 'two') {}

  setStyle ("'textAlign","Center");

  }

  }

  ]]>

• Alignment of the label question form

  In my current application, I have a lot of forms with each with sets of form elements, as follows:
  
  < mx:Form id = "theForm" >
  < mx:FormItem id = "formName" label = "" name: "width ="100% ">"
  < mx:TextInput id = "formNameText" text = 'Epsilon' / >
  < / mx:FormItem >
  < mx:FormItem id = "formDesc" label = "" name: "width ="100% ">"
  < mx:TextArea id = "formDescText" text = "Lorem sit amet ipsum dolar" / >
  < / mx:FormItem >
  < / mx:Form >
  
  Which is all very well, but by default the entire text of the label is displayed as well aligned. I would like to change this to left aligned, but I'm not finding a way. I tried on the shape and textAlign textAlign and horizontalAlign on the FormItem, without effect. I went through the reference language for FormItems and found the FormItemLabel object, which is supposed to support textAlign, but who, in CSS, did nothing. Y at - it a property somewhere that controls this, or I have no choice but to rebuild everything that elements in absolute position and empty the form?

  The only way for you to do is to create your own extension to FormItem class. Form and FormItem are deliberately rigid in this sense; That's the purpose of the form and align the labels in this way. The container form MXML, unlike an HTML form, has no special meaning beyond the page layout.

  If you don't want to extend the FormItem class, and then use the container for the grid (not DataGrid) and align objects as you want. Think of the grid as the equivalent in HTML format

  tag.

  If you have Flex Builder 2, make a grid in design mode will be much easier than hand coding it.

• Vertical alignment of the label PanelLabelAndMessage

  By default, the left label is centered vertically. Can it be aligned on it? I think it's desirable design for most of the cases.

  Hello

  labelStyle value = "' vertical-align: top" for panelLabelAndMessage. "

  Kind regards

• Align to right the label text

  How to make the text inside the right side of the label aligned using c ++

  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  ...
  
  TextStyle rightAlignedStyle(SystemDefaults::TextStyles::bodyText());
  rightAlignedStyle.setTextAlign(TextAlign::Right);
  
  ...
  
  Label *label = Label::create()
          .textStyle(rightAlignedStyle);
  
  or
  
  label->setTextStyle(rightAlignedStyle);
  

• Align the labels and the lovs in a proper order?

  Hello
  
  I have 3 panelgroupLayouts plg1 and plg2 plg3 with Halign:center and page layout: horizontal.
  Under each panelgroupLayout an output label and an af:selectOneChoice are here.
  Under plg1; label: empno
  Under plg2; label: employeeName
  Under plg1; label: empadd
  for this reason my lovs and labels are not aligned in the same line vertivally.
  
  How to organize these all labels and all the socs a vertical in order to make the look n feel neat?
  
  All suggestions will be really useful?
  
  Thank you.

  Then put the panelFormLayout inside the panelGroupLayout and set its halign "Center".
  Here is an example.

• In the Label alignment Center

  Hello
  I work in flex 4.

  I use a string named str varaible and I stored
  Str = "would become computer literal to alll his things in six months with a computer."

  I want the str variable is divided into San and William. I used to divide the str variable by using the following lines
  
  if(Str.Length>50)
  {
  San = str.substring (0, str.lastIndexOf ("", 50));
  slithe = str.substring (str.lastIndexOf ("", 50) + 1);
  firstLine();
  Alert.Show (William);
  }
  on the other
  {
  San = str;
  slithe ="";
  firstLine();
  
  }
  
  So I want to create labels of words each using these lines

  
  private void firstLine (): void
  {
  Alert.Show (San);
  var l1:Number = fline.length;
  Alert.Show (L1. ToString());
  
  myArr = Fline.Split ("");
  myarr1 = slithe. Split("");
  
  var l1:Number = Number (l);
  = myarr.length inputValue;
  Alert.Show (inputValue.ToString ());
  for (var intLoop:int = 0; intLoop < inputValue; intLoop ++)
  {
  LBL = new Sun;
  LBL.ID = "l" + intLoop;
  LBL. Text = myarr [intLoop];
  LBL1 = new Sun;
  LBL1.ID = "l" + intLoop;
  LBL1. Text = myarr1 [intLoop];
  
  lbl.addEventListener (MouseEvent.MOUSE_OVER, onLabelOver);
  lbl.addEventListener (MouseEvent.CLICK, onLabelClick);
  lbl.addEventListener (MouseEvent.MOUSE_OUT, onLabelOut);
  lbl.styleName = "hai1";
  
  LBL1.addEventListener (MouseEvent.MOUSE_OVER, onLabelOver);
  LBL1.addEventListener (MouseEvent.CLICK, onLabelClick);
  LBL1.addEventListener (MouseEvent.MOUSE_OUT, onLabelOut);
  LBL1.styleName = "hai1";
  
  labelBox.addChild (lbl);
  labelBox1.addChild (lbl1);
  
  }
  labelBox.styleName = "lblalign";
  
  }

  After I shared the words Add the words (lbl) in labelBox and labelBox1.
  Here the LabelBox and LabelBox1

  < mx:HBox id = "labelBox" x = "54" y = "263" width = "389" height = "18" color = "#FFFFFF" alpha = "0.40" backgroundColor = "#000101" >
  < / mx:HBox >
  < mx:HBox id = "labelBox1" width = "389" height = "20" color = "#FFFFFF" alpha = "0.40" backgroundColor = "#000000" x = "54" y = "280" >
  
  < / mx:HBox >

  
  This is displayed as follows
  Would become computer literal to alll
  its things in six months with a computer

  but my requirement is to align this line towards the Center.

  Would become computer literal to alll
  its things in six months with a computer

  Is this possible.
  If possible ways give me some ideas.

  concerning
  Athi

  Hi Athiroy,

  Specify the properties... horizontalAlign = "center" on HBox, if you want to align the label horizontally Center.

  If you want to vertically align Center... then specify verticalAlign = "middle" for HBox

  horizontalAlign = "center" verticalAlign = "middle" color = "#FFFFFF" alpha = "0.40" backgroundColor = "#000101" >
  

  Thank you

  Jean Claude

• Align the label of an af:inputText on TOP

  I want to align the top of the label of a using whithout af:inputText:
  
  < af:panelFormLayout labelalignment = "top" >
  
  Is this possible?
  
  OBS.: In Adf 11g
  
  Thank you

  I think you should put in a component separate af:outputLabel.
  You can always do a layout our AF: panelGroupLayout-s.

  or

  Depends on what makes the rest of the page looks like.

  Edited by: Valhery April 25, 2010 06:52

• HP F2480 - aligning not printing labels

  Hello

  my HP F2480 is a great little Office all in one, but I've never been able to print labels in word (office 2007). There seems to be a problem with the alignment and the tags do not match the model selected in word. It is strange, however, that sometimes when I come to print on a normal A4 sheet it works fine. So I guess that it may be the different thickness of the sheet of labels.

  In any case if someone has had this problem or could help me that would be great. ~

  see you soon,

  Jeremy

  HI - you might try defining the type of automatic paper of plain paper in the printer driver, printing of labels.  If it works fine on plain paper, it might have to do with the automatic paper sensor.

  Hope that helps

• the label bug

  Hello

  CVI 9.0 (and XP64 using a GUI generated by the GUI editor, a problem), occurs if the attribute ATTR_CTRL_MODE of a control is changed programmatically from VAL_HOT to VAL_INDICATOR. In the user interface, the control mode is set as HOT. The problem is that the position of the label is shifted to the left in mode INDICATOR. changing the value hot translates the (starting) position. This happens for the digital controls and ring (I have not tried others). Thus the offbeat label may overlap other controls.

  I can't say if it is specific to the CVI 9.0, as usually, I build my controls programmatically. This time, I used the GUI editor for a faster test version...

  Also, I found no opportunity to present such problems/bugs that this forum. Is this the right place?

  Wolfgang

  Hi Wolfgang,.

  It is perfectly acceptable to submit bug reports in this forum.

  Floating labels are associated with the bulk of a control in a way such that when the part master changes position, the label is automatically repositioned. You see, for example, when you move a control and label moves with him. What happens when you change a digital or ring indicative control is that the inc/dec arrows on the left of the control disappear, and the entrance area of the control (which is the main part of control) grows to the left to fill the empty space. This movement to the left of this part of the command results in a label which is on the left side of the control (as opposed to, say, the top of the control) to also shift to the left in order to maintain the same distance from the main part. By the way. This does not happen only when you change the mode of control programmatically. You can also see if edit you in the editor.

  The solution for this is to save the position of the label (ATTR_LABEL_LEFT) before changing the control mode and then set it to the same position, after having changed the command mode.

  I agree entirely that there is a scenario in which most people would probably not consider the label to move, since the control as a whole is not really 'growing up '. But because the association between the label and a specific part of the control, and because this part is increasing, so this behavior occurs as a result.

  Because this behavior has always existed, even if we considered undesirable, that we couldn't really change at this stage, from now on, it is very likely that there are programs that have come to rely on it and change the behavior would break backwards compatibility.

• problems aligning ImageView and label

  Hello

  I have a container with LayoutOrientation.LeftToRight guidance.

  Inside I just an ImageView and etiquette. When I try to organize their

  that the icon and the text display on the same line, I have problems.

  Here's how it looks by default (without any filler etc.):

  

  (the container - green - perhaps a bit more space below)

  the 'text' is not visible on this image more).

  I think that all see you my problem. The picture starts to the right of the

  edge of the container (it is aligned with its upper part), so that there is a

  space between the label and the top edge of the container.

  I want the image and name appear seemingly on the same horizontal

  line. How can I achieve this?

  PS if I put the container topPadding to something, then the two components

  go down simultaneously and yet they will not appear on the same line.

  Thank you.

  I think I found the solution by setting verticalAlignment: VerticalAlignment.Center
  to the ImageView for example.

• Change the Position of the label of the window cover

  Is there a way to show the label to cover over the top or medium instead of the lower part of the active frame?

  If I want the label to be full height, should what size I choose?

  Also, if I update the label & smear the code below:

  blackberry.ui.cover.labels.push({
          label: 'Test',
          size: 10,
          wrap: true
      });
  
      blackberry.ui.cover.updateCover();
  

  Is it supposed to continue to add Test Test Test... or just once and replace it on the previous! Because sometimes I see two lines of the word, I don't know why.

  Thank you

  To align with instructions for interface user BB10, blanket labels appear on the bottom of the frame. A workaround that you can try is to set an image as the cover and in this image, design it so that the text is everywhere where you want it to be.

• Determine the height of the label automatically resized?

  I have a title tag is word wrapped and resized automatically.   I would like to get the height of it, so I can move my text to detail down according to the number of lines is the title tag.

  The height of the title tag variable always returns the same value, no matter how many lines it spans.  How can I align my text?

  If you use the label of all component of qnx, then the label properties textHeight and textWidth give the size of the text in pixels.

• Mobile, layout, aligned to the left

  I created a website using Adobe Muse and transferred the site to the ftp server. The site is online and is designed when looked at through a desktop computer. But when the same site is accessed from a mobile phone, the entire page is aligned to the left and there is a shift to the right. I even made a model of phone and the same uploaded to the ftp server and the problem persists. I've google a lot and html inserted the code in the metadata to make the site Center but in vain. Nothing works . I have a tight schedule and would be really grateful for any help fast.

  Hello

  If available to phone appears in the phone and still aligned left her and then go to the mode of the layout design phone page and make sure that it has no object is placed outside the area of the browser. (you can select all to check this. ctrl + a or command-A)

  If this is not the case please share the site URL file or .muse with us make the look.

  Concerning

  Vivek