Alignment of the X120e Cap key arrow

Similar Questions

• the sensitivity of keys arrow

  to add or remove concentric circles when I use the polar grid tool, I use the arrow keys, upwards or downwards.

  I watched the tut lynda.com video, it may add or remove 1 or 2 at the same time circles when he presses the arrow keys. instead, I add or remove circles of 9-10 (sometimes even more I think) whenever I press the keys, worries me a lot!

  It's the same thing when I use the arrow keys to decrease or increase the wind of the spiral or other tools.

  How can I change the sensitivity of the arrow keys in this case?

  great need help here ~ ~ ~ thank you very much!

  Unplug your WACOM tablet...

  It is a connected tablet, nothing you can do about it.

• Align the drop cap at the bottom of the paragraph

  I'm designing a model in InDesign and our chapter start may include a certain number. That is to say. "1 it's header. Sometimes the header will be 2 lines and sometimes the other.

  I want the number to be BIG and you want to, my text base line up to be a line or 2.

  The drop cap function or create a character style that makes this large number causes still my text align to the TOP of the number.

  Any ideas?

  Here's another thought.

  Use a nested style to get your large enough number, then put on your text between a larger and a smaller one for the number text box for the rest of the cuff.

  It is always a single line, but by setting both of your text boxes to align to the bottom, you can get the alignment you need.

  

• CS5 problems with the alignment of the object key?

  I use guides like objects for alignment keys without problem in CS4 for Mac, but just objects in CS5 fly somewhere not visible anywhere in the file. I checked prefs but sees nothing that would create this behavior, and alignment on the pixel grid doesn't seem to matter. Still works fine in CS4. I could draw a line to line up to as a work-around, but it would be tedious. Aligning to the selection and the artboard work properly. Anyone else noticed this or know what could be the cause of this? Thanks in advance for your help.

  Have you had this problem from the beginning, or it appears suddenly? I saw this problem in CS3, set by trashing the settings folder.

  Peter

• Alternating key arrow to the mouseup sprite control

  I have a little script that I use to understand moving around a 3D room. It uses the navigation via keys of arrow with this script:
  
  custom camera
  If pRightArrow then pCamera.translate (1,0,0)
  etc.
  
  This script is a behavior attached to the 3D model. How can I change this so that I can control the navigation via the 'clickable' sprites elsewhere on the stage?
  
  I know I have to fix a script on the actual sprite (as ' on mousedown... translate me... etc), but how to reference the trigger for the sprite to the action of the 3D model?
  

  It sort! Bah, globals, brain was not working!

• Once again on alignment to the right reference numbers with GREP

  For some jobs, I want the reference numbers in the notes align with the period that I have Options of IDCS4 reference Add (with an en space) as the separator between the number of note and the note text.  Not much so I set the paragraph style reference with a tab 'Match point' and then insert this tab at the beginning of the note.  I recently stumbled on this thread of 2009 where RodneyA that describes more in detail, and Eugene Tyson added a GREP search to automate the addition of tab: replace (~ F) with \t$1.

  I can't get this to work in IDCS4.  It worked in earlier versions?  Earlier this year, Jongware explained that GREP can not replace a reference marker, only to watch in front of or behind the marker to replace anything.  Unfortunately, in my notes nothing before the marker reference of GREP replace until I manually put my tab there.  Addition of these tabs to hundreds of notes by hand is not if bad (jumping with Ctrl + arrow keys) and ID's of the propensity to consume a way occasionally note, I need to check all the same.  But I was mistaken in thinking that if I want to automate the addition of tabs I you do this via JSX?

  Thank you

  David

  David, indicating when that you can't get something working, I must also tell you why

  But when I tried your "replace (~ F) with \t$1 ' for me it became real obvious right away: the code ~ F is not only 'the footnote reference number' but also the note itself in the text. So, it all works in the sense that you get a tab before the code of reference number, you get loads of additional tabs in your text as a bonus.

  There are several ways around this. The most obvious is to limit the operation replace all paragraphs in style with your reference style. If it is a single (mine is usually), it will work immediately. It is the first response of Eugene in the previous thread - possiblly you forgot to put this paragraph in the field Format style find.

  Another way is to add a tab only when the code of reference number is the beginning of a line:

  ^ ~ F

  replace it with

  \t$0

  (You're right noticing the trick 'postanalyse' cannot be reversed for an advanced search for just "opening of the line followed by the code of reference numbers". "It's the special flavor of an InDesign GREP Limitation).

  This may fail if you have a note at the beginning of a paragraph

  Still another way is to try to make use of the vertical position of the code reference number. If your references are superscript (which is fairly regularly) and the numbers in the notes themselves are not (that they may or may not be), you can search

  ~ F (+ position: normal)

  and replace with himself more a tab before, as shown above. (A variation would be to use a style of character for referrals by exposing and seek [none] style to pick up those inside notes characters.)

• I touched something and now the page up key goes back to the previous page, instead of a screen. How can I fix it?

  Normally, the previous page button moves a screen and the page down key moves one screen down. I hit a combination of keys by mistake and now the page up key load previous page while the next page button loads a page, I'll be back, mimicking the previous buttons and following. I can still use the SPACEBAR to go down one screen and the arrow keys, end and home work normally. The page of buttons function normally outside Firefox. What I've done and how to cancel it?

  Have you tried to close and restart Firefox or restart the computer?

• X120e Funtion keys brightness does not?

  I just got the x120e and I have been through the fixed auto-éclaircissant himself. After that, I hit the Fn + Home and adjusted to my preference. He was not on the charger when I did so I was in a dark room I had the brightness down. Later in the day, I plugged it in to charge and I went to make it brighter. The brightness does not change however. All other agents Fn + F keys work. But not both for brightness. The strange thing is, I shut down the computer, whereas standby mode, then opens it again and it was really brilliant and I had to almost squint, but once again the keys did not work to lower it. I closed it and opened it and it is even lower. The keys still don't work. Any suggestions?

  
  

• the two shift keys not working not

  I got an error of streamci.dll earlier today.  to restart, I discovered that my two shift keys were working is no longer.  given that I made experiences... Here's what I tried...

  1. I tried to restart

  2 i tried to uninstall and reinstall the keyboard driver

  3 - my computer is a convertible tablet also, and it has a virtual keyboard.  the shift FUNCTION keys on the virtual keyboard, which told me that the computer itself does entries correctly to the keyboard that assumes the virtual and the real key to the same port.  in any case, I would really like to get this fixed but I'm not sure where to go from here.  Help, please.

  4 - caps lock keys work, but the only way I have access to special characters is through the virt. keyboad

  Thanks, colin

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
  I suggest to try the methods below, one by one and check if that helps.
  Method 1: Try to perform automatic Troubleshooting Services and check out what he has to say.
  http://support.Microsoft.com/GP/hardware_device_problems
  Method 2: Check if the problem persists in safe mode and after the same return. It may also due to some software of third party.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode 
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Method 3: Try an external keyboard and verify if you are able to use the shift keys on it. Send back the same.
  Method 4: If the problem started recently, perform system restore.
  Reference: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• that comes with the laptop activation key is not applicable to the type of windows installed

  Hello. I try to activate my windows with the product key that I saw at the back of my laptop but a habit of working because it says that its not applicable to the ultimate windows that is installed on my laptop... his view are rather than I run windows 7 all upward rather than windows 7 ultimate... I don't know how to do this. Help, please. Thanks :)

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Menus are aligned to the right

  For some reason, the drop down menus under Windows 7 (Enterprise edition) are all aligned to the right (normally aligned to the left). I have never seen this before, and it's all about a relatively new installation of Windows. See a screenshot: http://www.hostanyimage.com/files/51145352950874579372.png.

  After some googling, I tried to adjust HKEY_CURRENT_USER\Control Panel\Desktop\MenuDropAlignment to different values, nothing helps. Any help? Thanks in advance.

  For some reason, the drop down menus under Windows 7 (Enterprise edition) are all aligned to the right (normally aligned to the left). I have never seen this before, and it's all about a relatively new installation of Windows. See a screenshot: http://www.hostanyimage.com/files/51145352950874579372.png.

  After some googling, I tried to adjust HKEY_CURRENT_USER\Control Panel\Desktop\MenuDropAlignment to different values, nothing helps. Any help? Thanks in advance.

  Hello

  There are a few problems with this behavior. First of all, if you are clicking very near the right edge of the screen, the drop-down menus will appear left everything simply because there is not enough room on the right side of the menu.

  The other problem is that the parameter 'Handedness' has become corrupted or changed. To change this, follow these steps.

  Press the Windows key + R logo to bring up the run dialog box. In the Open line, copy / paste the following text line.

  Shell: {80F3F1D5-FECA-45F3-BC32-752C152E456E}

  Press OK.

  This will start the configuration of the Tablet PC settings dialog (even if you don't have a Tablet PC).

  Select the other tab.

  In the right-handed/left-handed section, place a check in the option Left Handed .

  Click OK.

  This should place the menus on the right side.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• The right Shift key View 4 PCoIP/w and keypad does not work

  Hi all

  I'm having a weird behavior with the right shift key and the numeric keypad. This happens when you use view 4 with PCoIP. When you use RDP to connect to a system and using the console in vSphere.

  To illustrate the differences in the way he behaves, I typed the following string in an RDP session and a Console Session of vSphere.

  "@ @ 123 123.

  ^ Button '2' three times, three times, to left SHIFT + key '2' "123" on the top of the keyboard and 123 on the numpad + is offset to the right.

  

  You see that, while in RDP, the right shift key does not work and so that the console session the num pad behaves like the arrows or the end, pg DN (aka acting like numlock is turned off)

  VMWare tools are installed on the virtual machines in question. I tried to turn numlock on and off without a change in behavior.

  No I don't think that the numeric keypad problem has been reported.  But I've now reported.  I'll let you know if we have other questions.

• CS6 - keyframe will not align on the end of the clip, it snaps just * before * the end

  If I move a picture on the screen, the final keyframe will jump not at the end of the clip (even if it align with the edge of the window). It is with the timeline to zoom-out keyframe. Once I have break the keyframe at the end, I have to manually zoom in on key images, find the last key frame which should be end of the clip, but it of not, and then drag it to the absolute end of the clip.

  Does anyone else have this problem? I have to do this every time!

  

  Screenshot 1: timeline Keyframe broke at the end of the clip, zoom out.

  

  Screenshot 2: timeline zoomed in, why is not the keyframe at the end?

  Hi Prizm4,

  This problem is fixed for first Pro CC (7.1). If you do not want to see this problem for CS6, please file a bug report: http://www.adobe.com/go/wish

  Please see Ann Bens post for a workaround: http://forums.adobe.com/message/4532252#4532252

  Thank you

  Kevin

• Help using Léonie / old Toad move the text of "Key words" in "securities".

  Need help to use leonie / old Toad move the text of "Key words" in "securities".

  I have about 30 000 images with keywords but NO Title.  I want to move / copy the text in the keywords section in the section of the title.

  So, I tried this Script: Add keywords to title - Script of Léonie field

  He did a little work, but not completely.

  When I select an image in Photos, and then "Get Info" I'll see below in the title area, notice that the first two lines are the same.

  IMG_2621.JPG

  IMG_2621.JPG

  March 12, 2014 14:23

  My keywords are: Experimental engine 17 to 600 hours

  AFTER I run the Script, I get the following:

  IMG_2621.jpg - 17-600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I need is:

  17 to 600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I do not understand why the Photos shows the name of the file twice.   These fields are not labelled, but I was under the impression that the top line was the Description, the second line is the name of the file, and the third line is the Date.   Because only the first line is displayed under thumbnails, I try to have as much descriptive information appear in this area (as in the past, we could do with iPhoto or Aperture).

  In other words, when I run the script I hold my keywords to replace everything in the top line completely, eliminating the name of the file. Is there something wrong with this approach?  I would still have the name of the file to the second line, right?

  Thank you.

  Remove the file name of the title field, and then run the script. You will have the chance

  -17 to 600 hours experimental engine

  You can manually delete the "-" at the beginning or modify the script.

• I accidentally used an old key sync on my 3rd computer and need to change to match the other 2 computers. How can I remove the incorrect sync key and replace?

  I trying me to computer sync a 3rd and when I looked at what I thought was the key to current synchronization and he came, I realized that the key I used was old and now does not match the other 2 computers. How can I delete the wrong computer key 3rd to enter the correct key?

  Hello, on your computer 3 go in Firefox > options > synchronization and click on 'unlink this device' then you can configure it again with the correct credentials.