All audio tracks are on the disc?

Similar Questions

• Importing a project in EP 12 trial, read not all audio tracks!

  I have tried the vesion of the trial of 12 EP.  Import a project that I created with PE 9.  Everything seems to have been imported, including all audio tracks.  But when I play it back, some of the audio tracks are completely dumb, while others, are very well and I can hear it.

  
  Any idea what can cause this?

  With the Audio tracks 'muted', I would look at a few possibilities and especailly with a project created in an earlier version of the PrE:

  1. Open the Audio Mixer Panel and look to see if all the titles are muted.
  2. Play the timeline, and noted the concentrations in the Audio Mixer Panel and also if there is any movement of the "sliders" in the Audio Mixer Panel.
  3. Observe the Audio tracks, your Audio Clips are in the timeline and report those please.
  4. Ensure that the display of the keyframe is set to Volume in your Audio Clips, are there Volume keyframes?

  I'm sure others will have some more ideas and questions.

  Good luck

  Hunt

• When I drag files in WMP the sequence of songs is not because it is in the list of files. the first certain tracks are at the bottom of the playlist

  When I drag music files in WMP and in the field of reading list, the sequence of songs is not as it should be determined in accordance with the list of files in Explorer windows, the first or the first few tracks are at the bottom of the playlis.
  For example when I drag the track 1 to 10 in WMP playlist could end up with the 4,5,6,7,8,9,10,1,2,3 sequence. It ranges from which follow playlist starts with, but the first track (s) (rare) is at the bottom every time.

  PS. Shuffle is not lit.

  Is not necessarily any indication of a fault as WMP does this, even when it is running correctly [he apparently gets files loaded in the order that they appear in the allocation table disk files].

  You can

  1 after dragging in the playlist, drag files to the top or to the bottom of the playlist in the desired order before you save the playlist.

  2 Allocate Index properties for each track before slipping as WMP then normally behave correctly when you drag them.

  3 you can also drag the in WMP individually to achieve the same end result.

• The audio tracks are destructive?

  I am quite new to the first, but not so very new to NLE. The biggest obstacle I'll have my switch at first is that when I drop a new video + audio file on the timeline, or if I drag a file already existing around the timeline, and the audio track of this file should land on top of any other file audio clip, the audio clip that was there is suddenly truncated. I expect that the audio clips would just be piled one on the other, but it seems that any audio clip that gets all or partially 'hidden' in another way is destroyed.

  I tried to drag the rear audio clip to be the same length as its video clip associated with, but no matter what I do, the audio clip is always shorter than its associated video clip.

  Y at - it a command to "restore the audio track of the video? A command that could bring back if it was totally destroyed, or I would like to 'stretch' the audio clip to the same length as the video track?

  I hope that makes sense for someone...

  Thank you

  -joe

  The change is non-destructive.  Whaever you do on the chronology does not affect the original material.

  To 'untruncate' the audio (or video track, depending on what you want to do), make sure that the track is not selected, and drag alt the tail (or head) of the audio track (or the video track) to its original location.  It will not work properly if the track is selected before pressing the ALT key.

  You can also separtate tracks audio and video so that they are independent of each other.

  It is also the technique to use if you want to change the audio tracks to slide

• How to find max Crest audio audio tracks combined with the applied effects?

  Hi all

  I work in the CS5.5 body.

  Often when I'm working on a timeline, I have two audio tracks of the same songs, one of the camera and the other a separate, synchronized sound recorder on the timeline, so that they combine into a single signal. Applied to these titles, I might have an effect filter or high-low pass EQ. Now, I know that the maximum peak of each track or the individual clips is easy to find using the "Gain Audio" menu item, which I hope is the equivalent of this item of menu but related to the final output after two signal tracks has been added and effects have all served? It is a task that is very painful to have to listen through the entire timeline to discover if the output goes into 0db, if there was a way I could locate on the timeline where the max output, which would definitively solve the problem.

  Find the way to do this would literally save hours per project! It's the only thing that makes me groan inwardly when I perform the output volume, what I have to do most of the time.

  If all goes well,

  Peter.

  I always put a compressor and - 1db limiter of ridges on the master to stop overmods.

• I need a driver for a hard drive Maxtor 3200 USB for Windows 7 x 64. Can someone help me? All my files are on the disk!

  I have a laptop hp dv5t-1000 CTO.  I tried all my USB ports, uninstall the driver and plug the unit again and searching for a driver online.  So far, no luck.

  The device is plug-and-play with Vista x 64.  I can't find a driver online for Vista either.

  Hello

  Try to check the drive for the case:

  Right-click on the drive-> properties-> tools-> error checking/Check now All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• all my files are on the notebook and I need them in normsl even when I download them they are always note pad please help :(

  now I am a minecrafter and I want to get a mod but all my files are in note pad Please HELP :(

  Hello

  You can follow the suggestions mentioned below and check with the question.

  Method 1: You can check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2: Install the fixit from the following link.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program:

  http://support.Microsoft.com/kb/950505

  Method 3: You can try a system restore to the date where everything worked well.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this helps!

• 1 single audio track is from the Source monitor?

  In CS6 on a Mac, my source monitor shows 2 channels for my audio, but when I click on and drag the audio only button in the timeline, it takes only one of 2 audio tracks. Why is this? I can drag again to get a second track, but why didn't he brings them both at the same time?

  Thank you.

  You can tell looking at the speaker icons in the header of the track.  You will see one of the mono tracks and two for stereo tracks.

  You can also tell by looking at the waveform.  Mono, will show stereo will show two.

• Pavilion 550-203na: what audio tracks are necessary

  I have a pavilion PC 550-203na which has realtak audion HDTV connected to an AOC12369VM monitor that integrates speakers.

  I have connected the monitor with a HDMI cable

  When I right click the sound icon in the lower right corner of my screen it says "Realteak speakers high definition audio not connected."

  Can I also connect a cable to the audio jack on the back of the computer? I tried this and didn't get any noise coming from the screen, speakers.

  If I plug headphones in the fron decision-making then I hear of them and the sound icon shows "Realtek high definition audio connected speakers"

  I am now confused

  Hello:

  If you normally can get her off the monitors with a HDMI cable, on your PC, you must go to control panel > hardware and sound > Sound (click on manage Audio devices) and select the exit HDMI AMD.

  Sound comes from the AMD graphics card that has your PC via the HDMI cable.

  The Realtek HD audio feeds a separate set of speakers, or you can plug the clear green audio cable to both the port on the back of the PC audio output and audio in port on your monitor (if it exists), stage monitors that would work a lot too.

• Is it possible to highlight all files (video & audio) that are to the right of the read head on my calendar? Or to the right of my mouse?

  I divided a complex project in which I half of the video clips to the left of my calendar and the other half to the right. I now want to drag the half right over and plug it into the half left, but there are so many files very high in the slot machine video 7, I can't click and drag to highlight all the. What should I do?

  Take a look at some tools and you will find the one you need.  There is a shortcut for that as well.

  Council that it has an arrow pointing to the right.

  Use it with Shift to enter several tracks.

• All audio tracks do not burn to CD

  Problems with playback after burning a cd

  I have recently started to experiencing problems with cds to bury it. I have always used for Windows Media Player for Vista for cd burning and have never had any problems in the past, but all of a sudden I get error messages, or sometimes no message and seems correctly, but then is still burning, it is no of tracks on the cd. Maybe remove a crucial part of the program or something of that nature? Is my burner broken? Or is it something simple to solve. Things I've tried: passage to the fire low speed setting, erasing disks RW and Afterburner, try new unused disks, ensuring his game on audio and not data disc or a DVD. I am currently using Memorex. The packaging reads as follows: CD - RW 12 X 700 MB / 80 min. Maybe this brand is not compatible? Reasonable advice would be greatly appreciated. Thank you, Melissa.

  Hello

  I would like to get a better understanding of this issue so that we can better help you.

  . What is the full error message and codes error do you draw?

  .  You did it all change hardware or software on your machine before this problem?

  I suggest to follow the steps in the link below and check if it can help

  Method 1: Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 2: I would also suggest uninstall you all 3 party DVD burning software and see if it helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

• How export a project consisting of 2 video tracks with many clips/effects and 1 stereo audio track so that the project can be worked into another compatible editing system?

  How do I export a project composed of 2 video tracks with many clips/effects more 1 stereo audio followed that project ACR is still worked in a

  
  

  compatible mounting system? Thank you!!

  When you export, you create a new video file that will have effects applied... in other words, a book finished

  Of course, this video 'complete' may be edited by someone else on another computer... but it SEEMS to me that what you want is for someone to take your editing, continue editing, THEN export a finished video

  Is this correct?

  If so, do some reading in the help file on the Manager project, so you can put your project and all files on an external drive to give to any other person

• audio track missing in the timeline & don't relink

  I am rebuilding a hour-long show and was almost finished yesterday.  When I opened the program this morning, not from my music or VO reproduce.  The clips were there, but not sound or wave form.  When I double click on the clip of VO in the project window, nothing happened.

  I took one of the clips offline then attempted to connect to the source element and received an error message:

  "An unspecified error occurred during the execution of a consistent action on the following file: Users/jamespwatt/Library/Application Support/Adobe/Common/media Cache files/Hawaii-7 6 - 16.wav 48000.cfa '.  This message also disappears quickly so finally that had to take a picture of it so I could copy the message.

  I went outside the Premier and open the clip in iTunes and it plays well back.  I exported a source through ME as a test file and get the same results.

  I deleted the cache of media several times, rebooted PP, trashed preferences and restarted the computer and CCPP.

  I was able to reconnect all of my music, but not my VO, and I'm in a dilemma how to get this accomplished.

  This project is a version previous to the first Pro CC, not sure, but a year ago.

  Any ideas or suggestions would be greatly appreciated.  In addition the program works great so far.

  Thank you... Jim Watt

  Mac (retina 5K, 27 inches, end of 2014)

  4 GHz to CPU: Intel Core i7

  Memory: 32 GB 1600 MHz DDR3

  Boot disk: Mac HD/3 TB Fusion

  Graphics card: AMD Radeon R9 M295X 4096 MB

  Video players: Raid 6 to '0' in OWC Raid housing

  Write speed: 328 MB/s

  Reading 333.7 MB/s

  4 TB G-Raid

  Write to 245,9

  258.0 read

  First Pro CC 2015

  2 additional HDMI monitors

  T - Tap AJA

  I uninstalled PP 2015 and reinstalled PP2014 and the update to see if that would solve the problem with the files of VO disappears.  Exactly same thing is happening in PP 2014.  lay down on the track VO VO, then close the program and reopen it.  clip is there, but not to wave or audio form.

  I got to thinking about all this started after I installed an update of Sonic Pro/Smartsound so it would work with PP 2015, so I disabled just my Smartsound 5.8 file and the plugin for Premier Pro and I now VO.  No music, but the remains of VO when I close the project... I therefore believe that the update of Smartsound must be the culprit.

  Everyone has installed the latest update of Sonic Pro/Smartsound in PP 2014 or 2015. ?

  THX... Jim Watt

• all my emails are in the spam folder

  Hello

  I have a gmail account - all my emails received in gmail are categorized by mail as spam

  I disable the spam filter, but it keeps

  with other browsers (thunderbird), so good

  help needed please

  Pascal

  The brown color marked messages? If this isn't the case, Mail does not move it them.

• Output Audio Tracks to separate the Wavs

  Hello

  I often need tracks for release of my first cup of Wav files. I need them separately, which means a stereo Wav for a track. Is it possible to do so, in addition to the hard by inhibition of all titles, but one?

  Thank you

  Daniel

  Not that I know of.