Pavilion 550-203na: what audio tracks are necessary

Similar Questions

• The audio tracks are destructive?

  I am quite new to the first, but not so very new to NLE. The biggest obstacle I'll have my switch at first is that when I drop a new video + audio file on the timeline, or if I drag a file already existing around the timeline, and the audio track of this file should land on top of any other file audio clip, the audio clip that was there is suddenly truncated. I expect that the audio clips would just be piled one on the other, but it seems that any audio clip that gets all or partially 'hidden' in another way is destroyed.

  I tried to drag the rear audio clip to be the same length as its video clip associated with, but no matter what I do, the audio clip is always shorter than its associated video clip.

  Y at - it a command to "restore the audio track of the video? A command that could bring back if it was totally destroyed, or I would like to 'stretch' the audio clip to the same length as the video track?

  I hope that makes sense for someone...

  Thank you

  -joe

  The change is non-destructive.  Whaever you do on the chronology does not affect the original material.

  To 'untruncate' the audio (or video track, depending on what you want to do), make sure that the track is not selected, and drag alt the tail (or head) of the audio track (or the video track) to its original location.  It will not work properly if the track is selected before pressing the ALT key.

  You can also separtate tracks audio and video so that they are independent of each other.

  It is also the technique to use if you want to change the audio tracks to slide

• All audio tracks are on the disc?

  Im not sure which forum is the best for this question, so here goes...

  I have a multicamera in PR sequence, which is linked dynamically to still and "Transcode now" in the SOUL.

  During transcoding encoding current windows that it treats audio tracks of all the tracks, even if the option to use only audio track 1 is selected in the PR

  All these titles are included on the disc? Is it possible to prevent them from be included on the disc / processed in the SOUL?

  Thank you.

  Wolv-

  SOUL will often treat each audio clip in a project before transcoding.  It's normal and nothing to worry about.

• What security ties are necessary

  all of a sudden, I encounter computer problems with tracking cookies & stuff when I do my AVG scan everything is microsoft windows when I checked my security and it lists

  Administrator of Gina-PC\Admin that is me

  Gina-PC\useres of users

  Trusted Installer

  I don't have change all someone I want, it's me to use and check what it means by the presence of a security and trust Installer and how can I change where I am the only one in control of my business?

  Please help it is causing major problems!

  Thank you

  Maybe you should contact www.avg.com for support.

• What XP updates are necessary after installing SP3?

  Listed monthly updating ISOs for XP start January 1012 and so far, end in December 2013. What month do I need to start to retrieve the updated ISOs, so I can update XP SP3 without problem until the end of XP support on April 8, 2014? In other words, SP3 is a collection of updates until a certain date, January 2008 for example. This would mean that I can retrieve all updates from February 2008 until the end of the updates available for XP.

  From what month what I need to recover the monthly ISO releases to achieve?

  Listed monthly updating ISOs for XP start January 1012 and so far, end in December 2013. What month do I need to start to retrieve the updated ISOs, so I can update XP SP3 without problem until the end of XP support on April 8, 2014? In other words, SP3 is a collection of updates until a certain date, January 2008 for example. This would mean that I can retrieve all updates from February 2008 until the end of the updates available for XP.

  From what month what I need to recover the monthly ISO releases to achieve?

  Why download the ISOs huge? You can do a Update CD tomorrow when I release Aprils UDC.

• Pavilion 550-127: what amd gpu will suit my computer

  I'm upgrading my pc and I found a gpu I want get the XFX Radeon RS RX 480. I will also buy a new power supply to be able to run it. I would like to know if this gpu adapts to my pc and what food should I expect?

  @BaileyButler709, welcome to the forum.

  I looked at the XFX Radeon RS RX 480 on Newegg.  If you look at the map in my link, it shows the map as 9.45 "length.  You can measure IO ports to return to the fron of the case to see if it will fit.

  Now, we focus on the power supply unit (PSU).  The computer POWER supply is 180W.  The video card requires at least 500W to work properly.  You need to upgrade the PSU also.  I always recommend at least 100W and requires more of the map.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• [Pre Ele 9] Audio tracks in the project are frozen. Impossible to move, edit, or even choose.

  Hello

  It is my first project using first. Great program, when you know what you're doing. Now, I'm on a modest laptop, Vista 32-bit, 2 GB of RAM, Dual CPU @ 2.00 ghz. My project consists of .wma of some .mp3 files, of .wav and some .jpgs. It's a small project, ten minutes, about 20 clips, some denominations of 20.

  I don't know exactly what happened. I tried to spend all my audio files that I had to fill this gap, I did. But I think I clicked on group, or link or something, by mistake, and now two of my audio tracks are literally does not. They play perfectly to the preview, but I can't move. I can't even select them. Make a right-click on the soundtrack does nothing. Even weirder is that my Audio 1 track is normal. It's just my narration and soundtrack songs that pose problems. I did research online, and I've heard of them being 'locked' or 'disabled' or something with keyframes. But I don't think that's it. Or maybe I need more of a noob guide. I turned on the size of the track and I saw the wave form for my audio. This is, but it is lower than my Audio 1 waveform. Also, I have tried to replace and made, but that has not worked. Finally, every time I try to add a new audio file in one of the two audio tracks, the program basically ignore and place in 1 Audio, or even create a new audio track.

  I know I did something so simple, I know that I just need to uncheck this tiny bit option. Maybe some of you are even sneering. But please, I beg you, help me. Put an end to this torment.

  If you need more information, let me know.

  Thank you for your attention.

  I agree with Neale on this one. Narration and soundtrack are 'fixed' Audio tracks and include at least one property, other Audio tracks do not have - they cannot be deleted. Usually, they work very well, as indicated by their names, but then sometimes, they refuse everything works correctly. Why? I've never seen a common element, when they just sort of freezing, or refuse to mix their Clips.

  Because this behavior has struck several, most of us recommend just DO NOT either using, and instead, simply by using a regular vacuum Audio track. I remember an instance when this proceeure did not work. This behavior has been around for over PrE4.0, by my reading, but can happen even earlier versions. There is just something in the structure of these two Audio tracks, coming "alignment", with some operations, perhaps assets.

  On the note of "certain assets", you happen to have MP3 files on one of these titles? They can cause endless problems, and not only on these two fixed Audio tracks. If you have any MP3 files, take a look at this ARTICLE.

  Good luck

  Hunt

• What plug-ins are not needed?

  I don't know what plug-ins are necessary and should be deleted.

  Thank you.

  Hello

  Check out these pages:

  Recommended by Firefox (install/update): Firefox plugins to play audio, video, games, etc.

  Not recommended (remove or disable) by FF: Firefox list blocked modules.

  hope that answers your question.

• Support for P2 missing AUDIO tracks in the order

  This problem has just appeared in the last few weeks.  When I drag a P2 clip on the icon 'to do for a new sequence' - everything is good, though, and audio all titles are there.

  Almost always, there are more then a clip, drag the clip sequence and some or all of the audio tracks are missing.  I must now each clip drag the icon "make for a new sequence" for audio tracks.  Is this a bug or what?

  CC2014 updated

  Windows 7

  Thank you.

  Make sure the source patch for compatible audio a selected clip. On the left are the keys V #/A # which appears to the left of the timeline panel. When these are blue, it means that this track of the source is 'on' and will be published in the target sequence. You will see them appear for an item when it is selected in the project or loaded into the Source monitor Panel.

• How to make two mono audio tracks in a stereo pair?

  My clip video, brought in first CS6 of Final Cut Pro 5, the left regular and audio tracks right, but first, they are not related in a stereo pair. Thus the volume level must be set separately in each track.

  In Final Cut, I can convert two independent audio tracks in a pair of stero selecting tracks and then by going to the Edit menu > stereo pair.  I can't understand how to do this first.

  When two audio tracks are not related, the volume level must be set separately in each track that is slow. But after two tracks are linked in a stereo pair in Final Cut, or another track adjustment allows to set both, together. That's what I want to do now in first.

  So, how do two separate audio tracks in a stereo pair in first?

  Tom

  Welcome to the forum.

  Have you looked at the padding on the left and fill right Audio effects?

  They should get what you want, or almost. Now, the result will be stereo double mono and not true, but will be 2 channel, and that is, I believe, what you really want.

  Good luck

  Hunt

• Importing a project in EP 12 trial, read not all audio tracks!

  I have tried the vesion of the trial of 12 EP.  Import a project that I created with PE 9.  Everything seems to have been imported, including all audio tracks.  But when I play it back, some of the audio tracks are completely dumb, while others, are very well and I can hear it.

  
  Any idea what can cause this?

  With the Audio tracks 'muted', I would look at a few possibilities and especailly with a project created in an earlier version of the PrE:

  1. Open the Audio Mixer Panel and look to see if all the titles are muted.
  2. Play the timeline, and noted the concentrations in the Audio Mixer Panel and also if there is any movement of the "sliders" in the Audio Mixer Panel.
  3. Observe the Audio tracks, your Audio Clips are in the timeline and report those please.
  4. Ensure that the display of the keyframe is set to Volume in your Audio Clips, are there Volume keyframes?

  I'm sure others will have some more ideas and questions.

  Good luck

  Hunt

• Adobe Premiere is doubly my audio track

  

  Whenever I import a video, two audio tracks are displayed instead of one. I have to cut it, and when I push in the sequence, I have the choice to either remove the audio every time that I import it or I cut the track and keep it to the end and has 3 audio tracks or more all the time. I can't hear the audio track additional in the default Windows video I watch the program, so if it's really a part of the recording, I can't say. How can I fix it? If it is a registration issue I use OBS Studio.

  With your clips in your project window, select all and then right-click > edit > audio channels and choose '1'.

• Premiere Pro is not audio tracks during the ingestion of MP4 video files?

  Everyone runs into a problem importing files .mp4 in Adobe Premiere Pro, in which only the video but not the audio tracks are imported?  Searching the Internet, I see that I am not alone with this problem.  Isn't Adobe Premiere Pro can correctly handle files video .mp4?

  Thank you

  JC

  Well Yes, that's apparently the case. Note 3 was not the problem. It's the fact that the app Android cinema FV-5 recorded the track audio in mono AMR, which is a rate very low bit QuickTime, mono audio format. Where, however, the application is set correctly to record audio to AAC - LC format, first Pro CC has no problems ingesting the blow to both video and audio on the smartphone.

  Thank you very much for your help with this.

  Best,

  JC

• When I drop a second video clip with audio in a sequence, how is the 2nd clip will not display or launches its audio track?

  I hope someone can help me with this.  I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published.  Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way.  Only the first loaded track will show that it is the audio track.  When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.

  I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.

  

  I hope that there is just a shoddy setting, I've turned on.  I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version.  Thanks much for any help.

  Check A1 left the lock.

• connecting the video and audio tracks

  I have a mac computer and the first cc pro.  as a person of FCP go to the Prime Minister, I always try to get the right combination of shortcut keys.  Somehow my audio tracks are liked llinked to the video tracks.  I have to cut and move them separately.  Must have pushed the wrong button somewhere, I don't know how to create a link to them.  Can you give me the path long and short?

  On the top left of the scene Panel is an icon that toggles that "link/unlink" function.