All audio tracks do not burn to CD

Similar Questions

• Importing a project in EP 12 trial, read not all audio tracks!

  I have tried the vesion of the trial of 12 EP.  Import a project that I created with PE 9.  Everything seems to have been imported, including all audio tracks.  But when I play it back, some of the audio tracks are completely dumb, while others, are very well and I can hear it.

  
  Any idea what can cause this?

  With the Audio tracks 'muted', I would look at a few possibilities and especailly with a project created in an earlier version of the PrE:

  1. Open the Audio Mixer Panel and look to see if all the titles are muted.
  2. Play the timeline, and noted the concentrations in the Audio Mixer Panel and also if there is any movement of the "sliders" in the Audio Mixer Panel.
  3. Observe the Audio tracks, your Audio Clips are in the timeline and report those please.
  4. Ensure that the display of the keyframe is set to Volume in your Audio Clips, are there Volume keyframes?

  I'm sure others will have some more ideas and questions.

  Good luck

  Hunt

• Secondary Audio track will not play

  I'm looking for some thoughts on what can cause a rather strange problem. I use CS 5.5, yet of course, and I created a BDD. I had no problem at all with DVD authoring, so I'm a little confused as to what could happen here. I've got video of the feature on the first video track, by habit and audio correspondence on Audio 1. I have a comment on Audio 2. Two of them are .wav files. My first button on the menu for this timeline links and that works very well. The second button that I have is a commentary for this feature track. I used the 'Specify Link' option and chose the correct video track and the second audio track for this corresponding timeline, in the hope that he would play the track comment when selected, everything as it should. When I do a preview disc and I click on the second button of the menu, everything works correctly, the video of the cheek of feature and the commentary track (track 2) works very well. When I burn the disc to a BDD, or an Image that I used to burn using different software (just like a trial), when performed on a Database drive and clicked on the second menu button, the video plays a lot, but audio is track one. I burned through 4 discs up to now try to find what could be the problem and had no luck. A reflection as to what can be causing this?

  I expect to throw some sort of mistake, but I would certainly try length setting in again. Revert to the original, then edit it, then transcode.

• All audio tracks are on the disc?

  Im not sure which forum is the best for this question, so here goes...

  I have a multicamera in PR sequence, which is linked dynamically to still and "Transcode now" in the SOUL.

  During transcoding encoding current windows that it treats audio tracks of all the tracks, even if the option to use only audio track 1 is selected in the PR

  All these titles are included on the disc? Is it possible to prevent them from be included on the disc / processed in the SOUL?

  Thank you.

  Wolv-

  SOUL will often treat each audio clip in a project before transcoding.  It's normal and nothing to worry about.

• Video and audio tracks do not go down together EVEN when linked selection is checked!

  I'm sure it's something really simple, but I just can't understand. And there's a button or option I checked because it didn't use to do a few days ago.

  Basically, I have a clip on the timeline that has a video and an audio track. I want to move the clip until the next video track, but I want the audio down to the next audio track too. Currently, it does not. Only the video file goes to the next track and the audio clip remains in the same way. How can I fix that while however many tracks I'm moving the video audio goes down by the same number of titles?

  

  Hello Ivan,.

  IvanTheEditor wrote:

  I want to move the clip until the next video track, but I want the audio down to the next audio track too. Currently, it does not.

  These are two separate movements in Premiere Pro. Don't forget that most of the people usually need not pass audio when moving video to other tracks.

  Thank you
  Kevin

• When you place a video in the sequence that the audio track shows not up/doesn't exist anymore

  when im working on video and I do a file over to the sequence of the video file appears but the audio track is totally absent, even when I try to drag audio only it won't work

  can anyone help? I use first pro for my studies and I get assignments where I need to edit and turn the video

  Try this:

  cannot drag the video image on the monitor source on timeline

• Words for audio files do not burn to CD

  words of copy

  I have on my Media Player songs which contain lyrics

  I want to copy some of these songs on cd, but when I do not copy the lyrics

  I loaded the lyrics of these songs using the editor tag tip on my media player option

  They show on the window-now playing on media player

  can someone help me please

  It is not possible to burn lyrics to real audio CD. However, you will always get the lyrics, by burning the songs as MP3 files on a data CD. To do this, click on the button burn up in WMP, select data CD and burn the CD again.

  Note that most CD players will not recognize data CDs.

• removal of all audio tracks in a project

  How can I delete ALL the sound recorded in a .cp? I don't mean how to compile without audio, I want to delete all the songs. I'd rather not go through each slide and click on each object and remove the audio associated with it. I have a lot of audio that I want to get rid of.
  
  Thank you.

  Audio > Advanced Audio

• When I drop a second video clip with audio in a sequence, how is the 2nd clip will not display or launches its audio track?

  I hope someone can help me with this.  I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published.  Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way.  Only the first loaded track will show that it is the audio track.  When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.

  I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.

  

  I hope that there is just a shoddy setting, I've turned on.  I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version.  Thanks much for any help.

  Check A1 left the lock.

• Audio tracks to follow tempo changes

  Hi all

  I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

  I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

  I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

  What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

  Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

  https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

  If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

  Hi flaviolira123!

  I can't open your file in Garageband (latest Version).

  But I think that you can only use Apple Loops loops to automatically match the tempo.

  I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

  I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

  Have you found a solution?

• create dvd Windows Vista does not burn, saying that the disk is not writable

  WINDOWS DVD MAKER on VISTA.  Don't burn the disk.  Teling guard me drive is not a writable disc, but I know that it IS writable.  I dropped the slides, yet will not burn.   I gave up the video, still will not burn.  I gave up the audio, still will not burn.  I tried to burn with a single (audio, video or slides) and still no combustion.  Can anyone help?

  Disable all filters may be worth a try... see the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

  Maybe you have a problem with the hardware with the optical drive itself.

  Are you able to burn DVDs using other software?

  The following free DVD creation software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Ulead, etc... but at least it is a start.

  Good luck.

• Audio clip does not appear with the video

  I have AVCHD clips in a project. When I bring an element in the timeline, the audio track is not there. Audio does not appear in the monitor Source, either. I am able to play the clips on the outside of the first and audio is fine. When I right click on a file to view its properties, it lists no audio. I brought the same clips in first on another computer and the audio seems in good condition. I compared the settings on both computers and everything is the same. Pretty amazing things

  Clear all the cache preferences including these media:

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache files

  Rename folder that image is and try again.

  Make sure that the card is copied to the hard drive first.

• How to see several audio tracks?

  I have a mov file which has two tracks - music and a voice-over.  When I export PR it exports only the music.

  How can I get both channels to be seen and exported?

  (Ironically, Premiere CS3 shows all audio tracks, 2 channels stereo, default - no work required!)

  Okay, I think that I fixed it.  I changed the number of channels to 6 (he showed the clip 4), now it seems to work.

  Does anyone know why he looms like this?  There are 4 ways, I believe, 2 for each audio source (it seems to look OK in CS6/3, but 6 channels)?

  Settings in the settings to change:

  

  4 channels (does NOT work correctly, only shows audio channel 1):

  

  I have to select at least 6 channels for all shows:

  

  That's what looks like the CC with 40 channels (there seems to be 3, adding more just creates empty strings):

  

• Audio playback on listening? When I started to work with more than 1 audio track.

  Hello!

  I have been using first elements 12 for the full HD video editing.

  Brand new for me just bought it 2 weeks ago.

  Now, during the last two weeks, I had this MAJOR proglem with audio editing.

  This problem is the headache and turn my simple editing in almost impossibilities.

  I had this problem with all my projects. SUBJECT

  Generally, the problem appears when I want to start working with multiple audio tracks.

  At somepoint that my projects just gets ruined, I do not mean just the audio tracks.

  The audio starts to disappear at random all audio tracks.

  It is not only about reading. When I exported the video, the audio has been partly missing, as well as the project.

  I tried to get help on the forums and find all that I could find, but have not been able to solve this problem.

  Small fix helped a little:

  I have the audio export to single track and bring back to the project. It works but I still usually edition more to do.

  I do not understand why reading disappears, I fear that this is a bug.

  I found a lot of problems in previous version on people with the same type of problems, but no help for this version of the program.

  To solve the case, I changed my audio setting in ss12.

  I tried to first WDM Sound and ASIO4ALL V2 components, but same problem on both.

  I have looked up my device for audio playback and ss12 matches are not on mute, and volume up.

  I deleted my first items appdata\roaming\adobe C:\ & first 12 items folder preferences... help do not...

  I press the update about every day in the hope of a new version... But yes, program always tells me it's the last.

  I usually work with 3 maxinum of audio track only. And I do really basic here stuff...

  I have put all my audio to the fore and he gave me the best results, but it does not appear to take the problem by far as at somepoint randomly my audio playback is missing again, randomly through the reading.

  Please someone? I feel desperate here.

  Info about my computer:

  Operating system: Win7

  Processor: AMD Athlon (TM) x 4 955 processor 3.20 GHz

  (vivid RAM) memory: 4GB

  system: 64-bit

  < left download, installation, setting up mod-kglad forum >

  Post edited by: kglad

  Tascruel

  Thank you for asking. I wanted to put that in my last answer and I forgot to do.

  The Adobe party line is that you cannot change a predefined project settings when it is enabled and that you are in the Premiere Elements workspace. I described a way to do in some cases when editing Notepad document of the project saved/closed (project.prel) file.

  http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html

  It is often easier to start a new project with the appropriate project preset, blocking the automatic action of the program in this regard. To do

  Open Premiere Elements in his workspace Expert.

  Go to file Menu/New/Project and in the project preset together preset that matches your source media properties. Before leaving the new project dialog box, make sure you have a checkmark next to the "Force selected setting on this project."

  Back in the workspace of elements Expert first, then go to add media/files and folders to your source media in the assets of the project which you drag the media from the source to the timeline.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add it... Check your project settings via Edit Menu/Settings/general project, against the readings, especially in editing Mode, timebase, and image size.

• [Pre Ele 9] Audio tracks in the project are frozen. Impossible to move, edit, or even choose.

  Hello

  It is my first project using first. Great program, when you know what you're doing. Now, I'm on a modest laptop, Vista 32-bit, 2 GB of RAM, Dual CPU @ 2.00 ghz. My project consists of .wma of some .mp3 files, of .wav and some .jpgs. It's a small project, ten minutes, about 20 clips, some denominations of 20.

  I don't know exactly what happened. I tried to spend all my audio files that I had to fill this gap, I did. But I think I clicked on group, or link or something, by mistake, and now two of my audio tracks are literally does not. They play perfectly to the preview, but I can't move. I can't even select them. Make a right-click on the soundtrack does nothing. Even weirder is that my Audio 1 track is normal. It's just my narration and soundtrack songs that pose problems. I did research online, and I've heard of them being 'locked' or 'disabled' or something with keyframes. But I don't think that's it. Or maybe I need more of a noob guide. I turned on the size of the track and I saw the wave form for my audio. This is, but it is lower than my Audio 1 waveform. Also, I have tried to replace and made, but that has not worked. Finally, every time I try to add a new audio file in one of the two audio tracks, the program basically ignore and place in 1 Audio, or even create a new audio track.

  I know I did something so simple, I know that I just need to uncheck this tiny bit option. Maybe some of you are even sneering. But please, I beg you, help me. Put an end to this torment.

  If you need more information, let me know.

  Thank you for your attention.

  I agree with Neale on this one. Narration and soundtrack are 'fixed' Audio tracks and include at least one property, other Audio tracks do not have - they cannot be deleted. Usually, they work very well, as indicated by their names, but then sometimes, they refuse everything works correctly. Why? I've never seen a common element, when they just sort of freezing, or refuse to mix their Clips.

  Because this behavior has struck several, most of us recommend just DO NOT either using, and instead, simply by using a regular vacuum Audio track. I remember an instance when this proceeure did not work. This behavior has been around for over PrE4.0, by my reading, but can happen even earlier versions. There is just something in the structure of these two Audio tracks, coming "alignment", with some operations, perhaps assets.

  On the note of "certain assets", you happen to have MP3 files on one of these titles? They can cause endless problems, and not only on these two fixed Audio tracks. If you have any MP3 files, take a look at this ARTICLE.

  Good luck

  Hunt