all data lost on the centro after taking the battery

I have a palm centro. I took out the battery like I use to do when it freezes on me. but the last time, she erased all the data on my centro, ATnT. I was not pushing any button on the button, as what you do with hardreset. I just took the battery and put back in, a soft reset in fact. Fortunately, I have all the data saved on palm desktop so I just it synced to my phone. This confuses me, is that my phone has done this, erase all the data when I took just the sim card and the battery on my phone. He has never done this before. I have not installed any third-party application on my phone and did not made any changes to the settings. y at - it something wrong with my phone. I'm afraid he might do it again once I get out of the battery. is it possible to prevent this.

hoping for your response...

Thank you!...

No way to prevent it but I suggest to test randomly to see if it happens again. If it doesn't then the device must be repaired or replaced.

Message relates to: None

Tags: HP Tablets

Similar Questions

  • Classic BlackBerry BB Classic - all data lost after reboot

    After turning on my classic Blackberry all data had disappeared - even no more e-mail accounts. Just like a reset is complete. Can anyone help?

    This could give a try. If it does not work or solve the problem then I would suggest to contact your carrier to get recovery for BlackBerry for resolution.

    http://www.BlackBerry.com/BTSC/KB36747

  • How we prevent data lost on the relocation by recovery dvd

    Dear Sir.

    I bought the computer laptop pavalion g6 1002tx

    At that time, I had win 7 OS.

    later another two months, I installed win 10.

    now I want to reinstall Win 7 again because I like more.

    I have the DVD of recovery also for win 7,.

    But the problem is what if I install win 7 with the help of Recovery Dvd my data all important about 500 GB will be lost, because the installation using recovery DVDs will completely make my Matthew in a State factory.

    I don't have any external hard disk, all I have is only a slow internet connection, my laptop and recovery DVDs.

    Offers please how can I reinstall my original win 7 with the help of recovery DVDs without losing even a 1 mb of data.

    You can not. You need a way to backup you current installation.

  • How to reset all data stored on the mac and modem addresses in win 7

    It seems that my brother when he comes to get the shop computer connected to the internet and it seems that something has happened when you choose what type of network, it is for the connected modem. the thing is that since that point the wizard has not arisen more and I was unable to use the modem to whom it happened.

    When I use my home connection, I use a connection wireless or wired even and all right, but I don't know how can I reset the data stored on the internet devices mac address and dns...

    so if I would again plug into the modem that has happened this problem, he probably pop ups yet what kind of network for the device connected.

    I tried netsh reset, but nothing happened.

    greetings and thanks in advance

    PS: I use win 7 Home Basic. x 64

    Lenovo laptop

    To reset the cache of MAC addresses: netsh interface ip delete arpcache

    To reset the DNS: ipconfig/flushdns

    Edit: remember to do as an administrator. It also can not solve the problem, but it is worth it.
  • distinguished saved all data by sharing the deskop

    Hallo!

    any computer desktop or between two clients sharing application session is open.

    Do someone knows where this session data saved?

    Wharton is the end of a session?

    Someone automatically deletes the data?

    Thanks for help

    Susanne

    Hi Susanne,.

    You use any third-party application to share two computer or Microsoft remote desktop sharing?

    Ideally, when you connect two computers by using desktop sharing programs, the connection is trying to establish a secure connection and there will be no data transfer unless you try to discuss or to save all files.

    If you use a third-party application sharing, you can communicate with the support of the application for more information.

    Provide more information so that we can help you.

  • Z22 all data lost palm desktop Memo / can not recover

    Hello

    When I opened my z22 office program I got an error message saying roughly memo cannot be opened, it may have saved a '.dat' file but I can't find anything.

    None of my memos exist on the desktop anymore, thankfully, they remain on the z22 because it was not plugged in.

    I did nothing different than usual, I have no hotsync etc..

    I use firefox, windows vista home basic sp2 32-bit T1500.

    I tried to open the Palm as an administrator, but it changed nothing.

    Thank you

    Have you tried restarting the computer?

    When a computer malfunctions, there is always a chance that something might go wrong!  I can't guarantee anything across your screen...

    You could try the option "repair" in Palm Desktop.  Go to Tools/Options/tools and use the check now button to see if it can repair damaged databases.

    If it were my PDA, I'll try what I suggested.  If you have another Palm OS device handy, try beaming the data to the other device as a backup before you attempt a HotSync.   Don't forget to put the duct as I mentioned - "Pocket replaces Desktop" for the data you want to transfer.  Do not click the box for "Set as default" - you want this happen only once as a test.

    WyreNut

  • Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

    A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

    If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

    If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

    Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • BlackBerry smartphones can I reinstall all my lost contacts?

    Hello

    My very first post. I'm not an irritable person. I tried to download an app on the App World and he asked me my device password. I had to put a new password with the help of a line technician of BB. Once I did she erased all my data, contacts and all my emails. Is there anyway to get to the less back all my contacts list? I don't care the emails.

    Any help would be appreciated.

    Thank you

    Hello and welcome to the community!

    I can't say for sure, but it sounds like a device WIPE has occurred, for one reason or another (I can't tell why). But, despite everything, once WIPED, all data disappeared from the BB. Therefore, only a recovery can send the data back to your BB. But to restore, you must have a source from which to restore.

    If you use the app FREE BB protect, you can restore from there. If you have never used the desktop software FREE to perform a backup on your PC, you can restore and then that. If you use the FREE method to synchronize (USB/BT) with a host PC-based application (for example, Outlook), while your data is there.

    If you use any of these FREE methods to protect you, move you from the latter to the former in that old saying - there are two types of device of calculation... users those who have lost data and those who will do so. Backups, like insurance, are not a reagent or an optional activity.

    Good luck!

  • Verizon computed using data differently than the iPhone 6 Plus

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Ocean 17A writes:

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Everything you said Verizon is false. The iPhone saves all data sent over the cellular network. There are some data types that will always pass by cell phone:

    • Visual Voicemail
    • MMS messages
    • Push email notifications
    • All data that is transferred when the phone is asleep and not trendy, WiFi is disabled when the phone is in sleep mode to save battery

    Verizon numbers and phone numbers may be different for an entirely different reason. Records of phone as sent or received data, but do not count data that fails to send and which must be retransmitted. Verizon has this data. This happens usually if you have a very low cell signal.

    My experience with AT & T, is that their number and phone match almost exactly.

  • How to detect the data received in the com port?

    I used NI-VISA, read to read function and tried to write and read the same data through back loop. I have read from the port, but I need to read only when all the data is in the port.how series I detects all data received in the com port? Based on the data received to write the data to the port only i need.

    Please help me

    Better it should work... just create your own port number, I used 20 com

  • Better implementation of a key ASN code to add all these entries in the stack?

    Hi all

    Calculator: HP - 50 g

    as in the title, I want to assign [ASN] a key to a command which sums up all these entries in the stack.

    Is there a function already built-in, or should I try to write a code of RPL to put in the <> <> and ASN?

    Thank you.

    If I understand correctly, you must write in RPL in <> <> , then enter the correct code for the key to use and the correct code for the used shortcut and then just evaluate ASN.

    My question remains, is there a built-in feature that summarizes all entries present in the battery or not?

    And if it does not exist, should I write a RPL with a loop until there are no more entries in the stack?

  • Qosmio x 870 - 13v - steam &amp; uplay late games when you only use the battery

    Today I used my Qosmio test only to initially battery my HDMI with my HDTV connection.
    With FAR CRY 4 on Uplay.
    But I've had shifts.
    Then I tested it without HDMI and Holy, same problem.

    My mothercard have been changed on November by Toshiba, I also changed my SDD for a Crucial MX200 Flash SSD 2.5 "1000 GB SATA III - CT1000MX200SSD1 internal drive...

    I never played games before all these changes using the battery only, then, I wonder what are those slowing problem & gal.
    When using the power plug, games work well.

    Any ideas? HWWMonitor shows 7% on the State of the battery.

    TKS for the advice,
    G2MARS

    After an internet search, I discovered that most laptops meet peformance same 'problem' with battery only. On top, the battery will be rejected so fast that it is useless to play all the games. Conclusion: find a plug or travel business only on the class if you want to play.

  • Example: Pavilion 15 ak032tx: can I charge my laptop from one day to the next with adapter without the battery? Will this affect my PC?

    can I plugged my laptop for one night only with a/c adapter or power with removing the battery? I mean my slow internet sometimes, if I have to finish downloading before dawn... Wil he effect on my laptop?

    If possible, leave the battery connected. If you remove the battery and power is interrupted for any reason any you could experience data loss or file corruption. It is better to have the battery to seize, if there is a loss of power. If you are worried about damaging your battery by leaving it plugged in all night, just run the battery a bit more and charge up again the next day.

  • Satellite A200 is not charging the battery

    Hello everyone!

    I apologize for my English; It is not the main language.
    Somehow that I can take my Satellite A200 and Assembly are not correctly open the cable (don't know what the cable, apparently the power of the screen), it has been between the keyboard and the top panel, but I forgot and put it between the motherboard and the top panel and... when all assembled and understood that most of the burned... cables precisely burned coil... cord I immediately pulled out but the battery remained in it... in general not very well turned out ;)))

    As a result of what it led to: first is sometimes not visible when you move the keyboard and the touchpad... to eliminate the need to restart the car... then, in principle, sometimes a laptop is not included, i.e. of tanning power of the lamp and all... in this case to remove the worst... and finally, power cable the battery is more responsible... i.e. After all this, I discharge the battery and now the laptop only works on the power cable.

    Question: is the problem of battery or motherboard?

    Your English is hard to understand, but it seems that you disassembled the laptop and some cables connected in the wrong way.
    Then something is charred and now you have some problems with the battery, etc.

    I think that there is a hardware problem, who knows what you did in the past
    The fact is that you did something wrong... it is always a risk if someone without a technician experience disassemble the laptop.

    In your case, I recommend you contact someone who knows how to check the hardware specifications, you need professional help

  • my HP Compaq 8510p said its pluged in but no load. the battery is only around the age of four months

    last week when I got home and plug my laptop says that it is pluged but do not load. I've done everything I can think of to fix this, but so far nothing works for me. Now I only have 2% battery left and I must be mobile. Could someone help me please?

    Hi Daniel,.

    You can follow these steps and check if it helps:

    1. turn off your laptop, unplug all wires and remove the battery.

    2. press the power button for 30 seconds.

    3. then replace the battery and connections.

    4. start Notepad and see if the battery may charge now.

    If the problem persists, the battery may be damaged. To resolve this issue, contact your computer manufacturer. If you purchased the battery separately from the computer, contact the manufacturer of the battery.

    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

     

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00259897

     

    Hope that this helps, please let us know if you need additional assistance.

Maybe you are looking for

  • Impossible to go to Firefox or Mozilla Web sites

    I just installed Firefox on my work laptop and imagine my surprise when the first site, I try to visit the site of https://accounts.firefox.com , does not open because: Accounts.Firefox.com uses an invalid security certificate.The certificate is not

  • Problem with corrupted video drivers.

    How is it possible to uninstall and reinstall the driver because I believe there is corruption? Is there a way I can check for corruption or problems with the driver before I try to R & are the driver?

  • All programs crash or slow down 2 minutes after the start.

    My computer works fine for a few minutes. After that everything started crashing or slowing down. The computer is pretty useless. I tried disk cleanup, I close all unnecessary processes, I installed Kaspersky security too.after I close all there are

  • setting a module missing in vista

    I have windows vista which has been installed at the factory. I created the system restore, but now only have access to those of recent months. I'm missing a module 'rundll' efcCvSID.dll or SJD.dll, in any case. How can I fix this with no disk window

  • create dvd Windows 7 no sound / preview very well

    seems to have only problem when you try to burn any avi with ac3 audio have you tried all the solutions on the web tried same format factory / fake program. have available codecs, all solutions please someone?