distinguished saved all data by sharing the deskop

Similar Questions

• How to reset all data stored on the mac and modem addresses in win 7

  It seems that my brother when he comes to get the shop computer connected to the internet and it seems that something has happened when you choose what type of network, it is for the connected modem. the thing is that since that point the wizard has not arisen more and I was unable to use the modem to whom it happened.

  When I use my home connection, I use a connection wireless or wired even and all right, but I don't know how can I reset the data stored on the internet devices mac address and dns...

  so if I would again plug into the modem that has happened this problem, he probably pop ups yet what kind of network for the device connected.

  I tried netsh reset, but nothing happened.

  greetings and thanks in advance

  PS: I use win 7 Home Basic. x 64

  Lenovo laptop

  To reset the cache of MAC addresses: netsh interface ip delete arpcache

  To reset the DNS: ipconfig/flushdns
  
  
  Edit: remember to do as an administrator. It also can not solve the problem, but it is worth it.

• all data lost on the centro after taking the battery

  I have a palm centro. I took out the battery like I use to do when it freezes on me. but the last time, she erased all the data on my centro, ATnT. I was not pushing any button on the button, as what you do with hardreset. I just took the battery and put back in, a soft reset in fact. Fortunately, I have all the data saved on palm desktop so I just it synced to my phone. This confuses me, is that my phone has done this, erase all the data when I took just the sim card and the battery on my phone. He has never done this before. I have not installed any third-party application on my phone and did not made any changes to the settings. y at - it something wrong with my phone. I'm afraid he might do it again once I get out of the battery. is it possible to prevent this.

  hoping for your response...

  Thank you!...

  No way to prevent it but I suggest to test randomly to see if it happens again. If it doesn't then the device must be repaired or replaced.

  Message relates to: None

• Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

  A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

  If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

  If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

  Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Verizon computed using data differently than the iPhone 6 Plus

  Verizon seems to count on me by using more data than my iPhone 6 more fact.

  My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

  Nobody noticed this discrepancy?

  I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

  I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

  Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

  Your opinion?

  Ocean 17A writes:

  Verizon seems to count on me by using more data than my iPhone 6 more fact.

  My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

  Nobody noticed this discrepancy?

  I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

  I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

  Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

  Your opinion?

  Everything you said Verizon is false. The iPhone saves all data sent over the cellular network. There are some data types that will always pass by cell phone:

  • Visual Voicemail
  • MMS messages
  • Push email notifications
  • All data that is transferred when the phone is asleep and not trendy, WiFi is disabled when the phone is in sleep mode to save battery

  Verizon numbers and phone numbers may be different for an entirely different reason. Records of phone as sent or received data, but do not count data that fails to send and which must be retransmitted. Verizon has this data. This happens usually if you have a very low cell signal.

  My experience with AT & T, is that their number and phone match almost exactly.

• How to detect the data received in the com port?

  I used NI-VISA, read to read function and tried to write and read the same data through back loop. I have read from the port, but I need to read only when all the data is in the port.how series I detects all data received in the com port? Based on the data received to write the data to the port only i need.

  Please help me

  Better it should work... just create your own port number, I used 20 com

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• User cannot delete the computer accounts. I can only remove it from the login page. all data remains.

  It is Impossible to remove any user account. All that is possible is to remove access.

  All data remains as far as I can do.

  I had a tech from Microsoft to take control of my computer, added an account to address a problem.

  Very bad and useless idea. He was a novice at best. First tech level phone for 3.5 hours.

  Screwed up my computer even more. The problem was later supported by a level 2 technician.

  The problem was solved in 3 minutes! "Microsoft's answer is bad saddle' pay another $100"

  Stay on the phone for hours, by another of our complete Idiots again.

  So now I have more than one account sharing of data on a single account. Absolute mess.

  In the meantime a 3rd of my desktop icons to fed my table only.

  And if I open my documents or go to my pictures or anything in this access I have a triple

  amount of the choice of data to the left pane. No way to remove the Microsoft windows user account is the same as my main user account. Only removed from the log in page.

  I have no respect for windows, they are a rip off the t"If you have never herd of this situation I'm in it please help. I don't have a hundred other Dollars to give to windows without using online help.

  Hello

  Thanks for reaching out. We are here to help.

  Here are the steps that you can try to solve this problem:

  1. connect with the main administrator account: How can I connect administrator?

  2. Once you are connect to the main administrator account, click Start , then Control Panel.

  3. click on user accounts> adding / deleting account> choose the account to delete.

  4. click on remove account> choose delete files> click delete account.

  Let us know how it goes.

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• Extremely high latency during the migration of the local data store to data store shared.

  Hi guys I hope you help me. Sorry for my English btw, I'm not native.

  Let's start!

  I have:

  1 vCenter
  1 host
  1 Distributed Switch (with a pg for managing network/IPstorage the esxi)
  1 standard switch (empty)
  1 FreeNAS to provide iSCSI LUNS
  1 Microsoft to provide iSCSI LUNS

  When I try to migrate virtual machines between the warehouses of shared data or data shared at local store, all right. The problem has become when I try to migrate virtual machines from the local to the shared data store. All data stores down (all paths down) and back up and I get this error:

  "Error caused by the /vmfs/volumes/volumenID/VMDirectory/Disk.vmdk file.

  
  When I try to migrate virtual machines from the local to the FreeNAS iSCSI data store it fails immediately.
  When I do the same local Microsoft iSCSI datastore that it takes a time loooooong to migrate the virtual computer, give it to me even all the paths downwards and uplinks down error but not lacking in migration.

  I'll give you some screenshots to see the errors.

  Thank you very much!

  EDIT: I have extremely high latency notice when I try to migrate from the premises of warehouses of shared data. average 2000ms with peaks of 50,000 (see my response below for more information)

  Finally, I found the solution! The problem is that I have been using E1000E vmnic instead of vmxnet3. I have configured an adapter vmxnet3 and boom! 20 ms in all migration!

  Thank you to all for help, especially Nick_Andreev !

• How can I export all the data collected on the page manage the of Echosign (list of all signed documents) to an excel file?

  Hello, rather than saving contracts individual pdf, I was wondering if there is a way I can export all of the data collected from the various contracts in a single great file?  Thank you

  Hello Olivia47511068,

  If you have used a library template to send the documents for signature, you can export the values of individual transactions by going into the tab manage and then scroll down to the section template Library, single click on it and on the right side, click on the history tab and select ' export the data. It will download the CSV file with data of form field of all transactions made using the model of the library.

  -Usman

• Script to list all the warehouses of data in a cluster, the virtual machines on the data store and the host of the virtual machine is on

  We have warehouses of data which are seen by more than one cluster. I need a script that will display:

  all stores of data seen by a cluster

  the virtual machines on the data store

  the host of the virtual machine is on

  the cluster the host is in

  The output I want is

  name of the store of data, the VM name, host name, the name of the Cluster

  any help would be appreciated

  Pretty sure this will do what you need:

  $report = @()
  Foreach($cluster in Get-Cluster){
      $datastores = $cluster | Get-VMHost | Get-Datastore
      foreach($datastore in $datastores){
      $vms = $datastore | Get-VM
      If ($vms.count -ge 1){
          foreach($VM in $vms){
          $object = New-Object -TypeName PSObject -Property @{
                Datastore = $datastore.Name
                VM = $VM.Name
                HostName = $VM.VMhost
                Cluster = $cluster
              }
          $report += $object
          }
  
      }
      }
  }
  $report | Export-Csv C:\Temp\VMs.csv -NoTypeInformation -UseCulture
  

  If you only want to shared data warehouses you can then use

  $datastores = $cluster | Get-VMHost | Get-Datastore | Where {$_.Extensiondata.Summary.MultipleHostAccess -eq $True}
  

  Hope this helps

• Possible to remove the data store shared without deleting content?

  Is it possible to delete a data store shared a host, without actually deleting content?

  

  If there are several hosts who share a store of data and for some reason any I delete the data of one of them, store connection can I do this without a deletion of all the virtual machines on the data store, as shown in the warning above?

  You can delete single LUN on the side storage (for example by hiding the it).

  Before that... do not forget that without virtual machines are running on it.

  After that... do a rescan storage adapters.

  André

• Question on the form of data - implicit sharing

  Hello
  
  We have a data form that the user can down to the level 0 in the rows to enter data. The question is for some customers when the user tries to enter data at the client level 0 is not save the number of entry but get substituted automatically with the parent value. If the user has entered in the parent customer was filling too the same value for the client to level 0.
  
  When I checked in the outline... I noticed that they are customers who had only one child, and I guess that this happens because of the property on the part of the implicit. I don't know if there could be another reason to do this. If I am wrong please correct me.
  
  Now, I know that if you change the property of the customer parent to share never, it might solve the problem. But the problem here is - there is a lot of these customers. And each month we receive new clients that could belong to the same case. It would be difficult to go and change the property to share ever for all customers and keep track of it manually. It might be a maintenance problem.
  
  So is there any other solutions? We can sort it solve? Please let me know your suggestions or ideas on what you think would be the best way to resolve this problem.
  
  Any ideas are appreciated.
  
  Thank you!
  ~ Hervé

  Hi Gwen,

  You can disable the implicit sharing in the Essbase.cfg
  When you set the parent members and children store, you create blocks more in the database, so use with discretion.

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_tech_ref/impliedshare.html

  In addition, if you leave the parent on the form, you should be able to write data to the child.

  Kind regards
  Robb Salzmann

• Erase the historic failure and Data Web site / remove all data from the Web site

  This morning after trying to remove the data this morning, except for a 64 KB of the Equipe.fr file have been removed. After browsing more and try erasing again, Equipe.fr 64 KB data would not clear.

  I deleted my phone and restored from a backup of the 17/09/2016, cookies/data of a before the browsing session have been restored. When I tried to remove them, the process has failed. All sites listed on the Advanced tab are always listed, all showing 0 bytes, but the list will not erase completely.

  Since I already deleted and restored, I don't know what to do next.

  iPhone 6 s 128 gb, iOS 10.0.1

  I thought about it. On the Advanced tab, I slipped left and deleted individually. Why they would not clear using remove it all works now, I will never understand.