All HP programs stopped working.

Similar Questions

• Programs stopped working properly on my new Windows 8.1 Pavilion

  I recently bought a HP Pavilion with Windows 8.1, and it was fine for several days until that one day almost all of my programs stopped working. Browsers will open and load the new tab, but then appear not to respond. All my games or their pitchers will start but will then stay here and won't do anything. If they have a progress bar, it will be 0%. I managed to open a game player single steam but the game itself closed to the time wherever I tried to start playing. Some RTS a few years ago was the only thing that still worked.
  My anti-virus software (McAfee) also will not open, but I see in the task manager that there a lot of processes running. The percent use of my CPU, memory, and disk were not overloaded either. I was not at all the sites that Web of Trust have not scored green so I doubt that it would be a virus, even if the main computer on my home network has some nonsense on it.

  RedRocky54,

  Welcome to the HP Forum.

  I'm not sure what the other computer on your network has to do with your new laptop - unless they have both started to get into trouble at the same time - in which case I suppose it's possible that there is an infection or incompatible Update shared by both computers.

  It looks like the system may indeed be infected - or at least could have been assaulted with a bad update.

  System restore

  You can try using system restore - if you can find a usable restore point, i.e. a date you can return before the problems started.

  The Windows system restore 8

  ============================================================================

  Discount

  It is sometimes easier to start over if you don't know what to do next and your diagnoses and anti-virus tools stop working.

  In any case, if you have run out of options on how to proceed, then you might consider that the computer is indeed again: you have had not long ago and you have no time to install more than a certain number of programs on it.  You might consider that it may be time to start over.

  There are a certain number of options that can help you do exactly that come built-in to your operating system.

  HP PC - Refresh Your PC to solve problems (Windows8) - c03538721

  Microsoft Windows:

  How to refresh, reset or restore your PC

  Understand the same update will eliminate your programs installed - you need to reinstall your program steam, for example and your browser (with the exception of Internet Explorer).  You need to reinstall everything that came with the system in the first place.

  In other words: READ before you make the leap into the options.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• a lot of my 'programs' stopped working, it says change settings, but where?

  a lot of my programs 'stop working' I think that maybe I changed a setting or something, earlier. When I log into windows live hotmail, he says he has stopped working and closes. Now, I have a list of programs, they all said that they have stopped working properly

  What's happening and where, how? Can I fix it? I am a student in full-time in school online, I need this laptop for work. I don't have the money to bring it to someone else to do now
  Please help me
  Kelly

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Please repost your question specific hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• My programs stop working when I opened the

  All my programs stop, as soon as I open them. The only ones that open are Sony Vegas Pro 8, Fraps, Minecraft, and Google Chrome. Can anyone help? The only thing that appears is _ stopped working. I tried to find a solution online but it does nothing.

  Try a clean boot and verify results;

  http://support.Microsoft.com/kb/929135/en-AU

• Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step is really for a solution online

  Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step really is to get an online solution and close the program, close the program. Signature of the problem:

  Problem event name: BEX

  Application name: Cloud.exe Creative

  Application version: 3.4.3.189

  The timestamp of the application: a 56702, 75

  The name of the module with the error: StackHash_0a9e

  Version of the module with the error: 0.0.0.0

  The module of time with error stamp: 00000000

  The exception of compensation: 00000000

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.768.2

  Language code: 1049

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  
  

  uninstall all cc on your computer.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  suspend your antivirus/antimalware

  Right-click on the file to install the desktop application, and then click "Run as Administrator".

• I still use OS 10.6.8 now Safari, youtube, etc. are all about to stop working.

  I need to keep the old Appleworks on my computer, so I always use OS 10.6.8

  Now, Safari, youtube, etc. are all about to stop working.

  What can I do?

  Someone suggested there was a way to run two OS on the computer - is it possible?

  Help...

  < re-titled by host >

  10.6.8. move a partition and upgrade the original score to a new version of OS X that you Mac can operate.

  You can then boot from 10.6.8 use AppleWorks or most recent version to run the new version of the software when you need.

  The other alternative would be to do away with AppleWorks migrating to newer applications, so you can just launch the new version of Mac OS X.

  AppleWorks has been finally updated by Apple in 1995 and declared dead in 2007. It's really archaic code.

• Cannot open Expression Web 4 program... says "program stopped working."

  Downloaded and installed .NET and Expression Web 4 but cannot open the web program... says "program stopped working" already deleted and reinstalled... same message

  Hello

  It comes to the installation of vista operating system instance

  Please repost in the community of expressions microsoft at the link below

  http://expression.Microsoft.com/en-us/default.aspx

• Program stopped working lights

  I know not boiled on computer, but my problem is, every time I click on my Cyberlink PowerDirector9, it starts to load up' I can see my file download"and the program stopped working lights... I can't! That happen before in the past where, after torque test, I could get in... as time went on, I had no problem with him. It began again last week, but now it lights up every time with each test. Can someone explain how can I fix. Thank you

  Hello

  ·         Faced with this problem only with this application?

  Method 1:

  I suggest you to follow the steps in troubleshooting from the link provided below and check if it helps:

  http://www.CyberLink.com/prog/support/CS/product-FAQ-content.do?ID=10792&prodId=4&prodVerId=736

  Method 2:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 3:

  If the problem persists, try to create the new user account and check if it works. See the link below:

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  Hope this helps,

• When you use "corel video studio pro X 3" and I'm trying to burn a video to a dvd I get a message error "program stopped working" "»

  My computer has vista and when you try to burn a dvd using the video editing software "corel video studio pro x 3" I get a message error "program stopped working" with the details below; "."

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: BurningApp.exe
  Application version: 1.0.0.50
  Application timestamp: 4ba12d57
  Fault Module name: ulaacdec.dll
  Fault Module Version: 2.0.0.4
  Timestamp of Module error: 4ba13562
  Exception code: c0000005
  Exception offset: 0000cc79
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 3081
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Please help, it makes me crazy!

  Hi dmoz74,
   
  1. have you tried to burn the DVD using any other program?
   
  We recommend first to restore the Corel Video Studio to its default settings and check the result. To restore the factory settings, see this article to restore the settings
  If the problem persists, we recommend to uninstall Corel video burning software, and reinstall it correctly.
   
  For additional assistance, please contact to Corel support team
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Constant message "program stopped working."

  Try to run a training CD, to guarded first get the message "program stopped working" and now he repeats to me start stopped working.  In both cases, I can't access the program.  Help, please.  Thank you

  Hello

  One question is whether it is Compatible with Windows 7.

  One option is to right-click on the setup.exe or install.exe, > and then select run as administrator to install and run it.

  And this can also help you:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  See you soon.

• PhoneRescue program stopped working

  Hello, I am trying to run this phone data recovery program that I downloaded on the internet on texts by retrieving deleted messages that it his criticism, I'll be back for evidence in a trial. can anyone think of what could happen? The software is called PhoneRescue, I downloaded the version of windows out of their Web site. It worked before on the Mac, I used, but I was using the free Version instead of the license that lets actually see the text that have been deleted.  Also has anyone had experience with this phonerescue software?

  Thanks for any help!

  Original title: (program stopped working) how to fix this?

  Trabour

  Once again, you will need to ask them these questions or find another program to recover the data.  We do not know if there is a log file, how does the app or anything like that.  Sorry

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and help and support center does not even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Hi Anna1298,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.