All in a station

Similar Questions

• why I can not all iTunes radio stations now

  iTunes Radio limit myself to a single station.  What I pay now for other stations that used to be free?

  See: http://www.macrumors.com/2016/01/29/apple-ceases-free-itunes-radio/

• Base stations automatically choose roaming configuration overlapping channels overlap

  I have a roaming configuration, as shown in the photo. When I select Auto channel (on 2, 4 or 5 GHz) selection every now and then the base stations choose the same channel, which causes interference. On 2.4 GHz is easily solved by manually selecting the channels not bunk.

  5 GHz, however, manual channel selection is not a solution. All three base stations use wide channels in 5 GHz (the Airport Express does not support dual band and only uses 5 GHz). A selection of no cumulation of the channels would be channels 36, 44 and 52. However, the only available channels for the manual selection of the Netherlands are 36, 40, 44 and 48. So I need to use the automatic selection on at least a base station, which unfortunately results in channels that overlap every now and then.

  I know that the base stations should choose the channels not bunk by themselves, but apparently they do not always. Does anyone know a solution for this? My current solution, when the wifi is flaky, is to use the application Explorer of Wifi to see if there are stations base using the same channel and if so, restart the base station "at fault." Obviously not an ideal solution. The second photo shows my current channel selection. 5 GHz channels are set to automatic and are currently not overlapping. The network dlink is not mine.

  

  I understand the problem... This is the European version especially airports that restricts the use of channels in automatic configuration. I do not understand why Apple does. Other brands are not. USA or where I am in Australia, I have a much larger selection and channels... Same as the automatic selection.

  Try something... Instead of using the non-overlapping channels, try to use the same channels. This amounts to extend wireless, when you think about it. In time both the base and expand the unit and can transmit or receive at the same time... (not to each other of course) but to other customers. And it works well.

  Test if this will cause a slowdown of your use wireless... control somewhere between the units where it is possible, a client may bind to one or the other... Disable one and test the speed of the link (actually transfer a file... not just a link speed)... now, close the other device and redo the test... so you know what transfer speed can be expected from each single unit. Now run the two units on the same channel, say 36. What result do you get this?

• Rotating table with 6 test stations. How to track the results data at each station to a machine of rotating table with 6 test stations?

  I would like to know if someone has worked with table Rotary testsystems and want to share an idea of how he dealt with follow-up of the results of each test result data in all the test station is in the table of rotation, so at the end of the cycle the results of good data by each DUT. There's a kind of technique used in arrays or clusters?

  Any comments would be grateful.

  Hi shada

  There are many ways that you can store your results, such as Matthew commented that you can use an array of Clusters. I would recommend this table of cluster storage in a Global Variable that is functional to make data transfer safer and easier to climb. There are many examples on how to use them on the community.

  There are a few tools in advance that you can also use to store your results as Of present value Tables (CVT).

  TestStand parallel model with the "Result of processing" option enabled stores automatically all the results of your Tests.

  Hope this information is useful.

• Has anyone found a fix for Airport Express music jump Apple?

  I searched for weeks for a solution to my intermittent gaps in music, aka jump. It's so frustrating. I really don't want to have to go to a wired solution. It will take too long and a cable unattractive in my rooms.

  I use the Bright House Networks 5 ghz Arris DG1670 router/modem that my provider rents for me.

  The router is less than 30 feet of my Airport express

  The airport express is on the ground, hooked by fiber TosLink Cable to my Focusrite Safire Pro 24.

  • Thinking that this could be a problem I have since turned sideways to try it as a cure for that surface in contact with the ground is less. The next step, I'll try is put on something instead of on the floor. But given the proximity is is not much of a problem anyway.

  I tried:

  • change the channel on my router from 11 to 40 to 47 to the automobile. They all jump.
  • I tried the 5 ghz and 2.4 ghz for connections.
  • Streaming of my Macbook Pro, streaming from my iPad 2 Air
  • Change the setting of joint A/N to N only (since the Express a N)
  • Activation and deactivation of WMM in the router configuration.
  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.
  • Change the interval of tag to 500 ms 100. (This allows supposedly with the flow and the battery life).

  All jumps. But after change the channel to a 44 superior to WMM and putting the Express with nothing around him to block the antenna inside, he seems to ignore a little less. It is likely that there are too many networks in my home nearby that are fighting in the spectra of bandwidth, but I hope someone may be able to offer something else.

  I suggest anyone with the same problems to try some of the "fixes" I tried above reading.

  Thank you.

  It may just be possible that you have a bad AirPort Express...

  I'm assuming that you have a 2nd generation 802.11n AirPort Express AND that you have configured to join the wireless network provided by your gateway Arris... correct?

  The router is less than 30 feet of my Airport express

  As you probably already know the AirPlay flow is from your MacBook Pro or iPad 2 Air to the Arris first, then, the Express. In theory, you should get the best streaming when all these devices are co-located. As you can imagine, if you take a camera from another room or floor, the stream will pass through a number of walls, floors, ceilings, etc., which will affect the overall available bandwidth.

  • Change the setting of joint A/N to N only (since the Express a N)

  Not quite correct. The Express supports modes radio 802.11a/b/g/n. 802. 11A only works on band 5 GHz. 802. 11 b or g only works on the 2.4 GHz band, and 802.11n can operate on either.

  • Activation and deactivation of WMM in the router configuration.

  AirPort base stations do not QoS support for this parameter shouldn't have any effect.

  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.

  This setting is usually only on the 2.4 GHz radio. All AirPort base stations do support 20 MHz channels across this tape. I suggest you leave this set to "20 option."

  and put the Express with nothing around him to block the antenna inside, he seems to ignore a little less.

  Most likely, it was the most effective solution. All wireless routers must be placed so that they are in a (possible) clear space for their antennas to be clear... especially of metal objects.

  It is likely that there are too many networks in my residence nearby which are fighting in the spectra of bandwidth...

  It is unfortunately a real problem... and maybe deserves to be studied more, if only to verify that it can be a cause. In an intense environment of Wi - Fi, most people will try to get the "best" of the performance of their network. This could mean, they have implemented their wireless routers to produce a network that can interfere with others without thinking.

  At best, you can try to change the channels that you already find one located on a less used channel... but without duplication of canals, including on the 2.4 GHz band are very limited. (1, 6 or 11 to the United States).

• Multi airports network problem

  I have an acting express airport as my internet gateway / firewall/router for 5 other airports that are each the clipping value. It works fine for a while but on a regular basis one or more additional airports gets 'out of sync' and needs to be reset to restore the functioning of connections wifi devices. All airports are 'green', even when not give ip addresses to wireless devices. Each airport has a static outside the DHCP range, but compatible with the network ip address. Each has identical wireless, security and bridge settings. I eventually addresses DHCP or router set in a way that is not ideal for consistent operation? See the screenshots below (1 global configuration, two are the "fiber" gateway/DHCP airport, two are from one of the additional airports):

  

  

  It is apparent from the first screenshot that all the base stations are connected to the "fiber" by Ethernet, except 'the barn stables', which seems to be connected by radio to the base station "barn." Is this correct?

  The 2nd generation AirPort Express stations base having only two Ethernet ports, you also use Ethernet switches into your current network configuration? If so, where they are placed in this global configuration?

  What is the brand and model of the Internet modem or gateway that you have the base station "fiber" connected to Ethernet?

  Finally, your needs networking requires a network of comments as well running?

• Firmware Apple 7.7.7 airport broke my Wan

  I updated my network routers (Time Capsule connected to the internet with an Extender Airport Extreme and Airport Express) 7.7.7 and 7.6.7 respectively. Once I did, the Airport Express can only be seen by the network on the Airport utility, but shows a green light on the front. I tried to reset and set up after resetting to default values. Nothing works. At one point, he shows the Express before the Capsule of time between it and the broadband. Help?

  I would say from the beginning. Let's get the Time Capsule (TC) return "upwards and being run." and then add your AirPort Express base stations to expand the range of Wi - Fi of the TC.

  To begin with, allow to perform a "full power recycle" of all your network equipment. Don't forget to reset 'default' as it is called by the link provided. Once completed, exit Express base stations turned off.

  Then use AirPort Utility to set up and configure your TC as required. Ensure that all of your network clients can access Internet from the TC. If successful, bring together all Express base stations in the same room as the TC. Yet once, using AirPort Utility, configure (one-at-a-time) each base station Express to extend (via wireless), the TC.

  Once verified that each base station Express can extend successfully the TC's wireless, move Express base stations to the desired location.

• Reviews Wi - fi only works on one floor?

  I have U-verse internet - using a router/modem Arris NVG599 - have five rooms in my house that are wired with a wire CAT5 that connect to a switch is connected to the router. All this is in the basement of a three-story house, and I use Airport Express - on the main floors and albums – to extend the wireless signal. (Old House, mix of plaster and plasterboard walls.)

  I turned on the Wi - Fi of comments last week, only access to internet. I could see and connect to the configuration without comment thread in the basement and first floor, but when I went to the bedrooms upstairs, the network wi - fi comments either does nothing or it shows and continues to request the password.

  I compared the two Airport Express'- and can not find if there is a setting on one and not the other. I think, at this stage, there must be a problem with one of the Express signla' which is blocking or does not connect to the comments Wi - Fi network. Any ideas/help/solution would be much appreciated.

  I have U-verse internet - using a router/modem Arris NVG599

  Is that your Arris routing gateway works with disabilities? In other words, does bridge? Comments from Apple base stations network functionality requires that the 'main' AirPort base station is run as a router. If the Arris is also doing so, then you'd have a status of "Double NAT" and maybe another problem to deal with.

  Here are the basic requirements for Apple customers networking:

  • You must have an AirPort Extreme (3rd generation or later), Time Capsule (2nd generation or later), or a Terminal AirPort Express 802.11n (2nd generation) base station. All the base stations must be running firmware 7.6.3 or higher.
  • The 'Assistant' utility 6.3.x AirPort should be used to implement the 'extension' of condition factory default installation airport.
  • The 'main' AirPort base station must be configured as your main router as a bridge.
  • All devices "guest" will be on the same subnet 172.16.42.x... Failure to Apple for the 'guest' network

• 32BV502B does not support MPEG-4 in Greece?

  Hi all,

  I bought a Toshiba model 32BV502B when I was in London.
  I red some reviews before buying it and I saw that this model is compatible with MPEG 4.

  While in London he used to play all local television stations. I send this TV to the Greece and it does not support local TV stations. There is a screen 'video format only is not supported"message or something like that.

  I downloaded the latest version of the firmware on the TV but still nothing changes.

  Do you know if there is another way to solve this problem.
  I would avoid a codec mpeg4 with additional devices, remote controls etc.

  Thank you

  > I red some reviews before buying it and I saw that this model is compatible with MPEG 4.

  I found the specs of the TV:
  http://www.Toshiba.co.UK/television/LCD/BV/32-bv502-high-definition-LCD-TV/

  The TV supports a resolution of 1366 x 768 and its equipped with an analog and DVB - T tuner
  The TV standards supported are: PAL BG/I/DK, SECAM BG/DK/L BG of NTSC 4.43

  I put t know exactly what you mean by mpeg-4 support, but always is there that you can use the internal tuner: DVB - T and analog to receive TV signals. If you are not able to use the built-in tuner, you will need to connect an external set-top box to the TV.

  By the way: you must always reset the settings of the TV after a firmware update and should choose the right country settings.

• MPEG2 HD for broadcast?

  I need HD to a TV station ads using their output requirements:

  Video:

  I guess that the transport (unspecified by the station)

  4:2:2@HL

  16: 9 (1920 x 1080)

  45 Mbps

  Audio:

  Audio MPEG, or PCM

  2 channels

  384 Kbps

  48 kHz

  I use episode, because it is easy to put it all in place, but I thought I'd see if this could be done in the compressor.  So far, no joy.  Bitrate in CBR is limited to 40, and I can't change the speed of transmission on the audio at all.  The station could be considered to 40 Mbps, but every time they refuse a place they warn my client, and it's bad mojo - permanent record, black spots and all that.

  Any suggestions?

  Sorry, but as far as I know, there is not a way to exceed the 40 Mbps MPEG2 (program or transport stream) limited to compressor.

  Russ

• I have an airport extreme and 2 airport expresses. my printer sees 3 networks alone vs. How to fix this?

  I have a relatively high House and have an airport extreme on one floor and 2 Airport Express - each on different floors.  My printer (Epson EF3640) considered the 3 networks all with the same name.  It seem to be printing problems if the computer is not on the same "network" as the printer. Any thoughts?  How airports that appear as a single network to the printer?

  Are all your base stations interconnected by Ethernet or wireless AirPort? Ideally for them all to be on the 'same' network you will want them connected by Ethernet and configured for a mobile network.

  Let us know if you want to continue this method and we can help you to help you with the installation.

• Support optimization WIFI at home: AE Verizon Quantum Gateway

  Hi, Im trying to install a monitoring system which will be installed in the living room. Currently I have my express airport connected via wifi, its redundant and inefficient for devices connected ethernet & airplay. So that I could play with this system I want to be sure before we drill holes through brick walls and buy a lot of cable. I intend to try with short cables prior to installation. Thanks in advance for the help.

  My main question is how can I optimize the configuration. I intend to move the extreme from the airport to the living room and pass a thread of outdoor cat 6 (see dotted line) to the living room, another in the basement (with an airport express).

  
  

  1. can I use the wan port gigabit on the router on port wan on the extreme? or do I have to use the LAN ports, which limit the speed to 100mbs.

  2. what parameters the extreme must be set to.

  3. can I run ethernet cable from the router Verizon to Airport express and still have the network under a parasol in airport utility (i.e. having airplay on the speakers of the express). or do I have to switch the extreme ethernet cables to the express.

  4 should. what settings I change my express? (currently its to expand the wifi network)

  Here is a picture of the ground floor. I also have a basement that has a 3rd generation of apple tv and airplay for the gym. My plan, if I am able to release of the express from the living room to use it in the basement to extend the signal via ethernet.

  2 MC414LL/A express airport base station

  Airport extreme ME177LL/A

  router: Verizon fios wireless broadcasting quantum gateway is turned off.

  The devices connected to my home network are

  WiFi - 2 smart cams x samsung, zeppelin B & W, thermostat to nest and protect nest of x 3. Smart TV Apple TV x 2 gen 4, apple tv 3rd generation

  Ethernet-Pioneer vsx90 receiver. iMac (Headquarters), the system of security provided.

  mobile WiFi: iphonesx2, iPad 2 & mini 2, macbook pro,

  

  1. can I use the wan port gigabit on the router on port wan on the extreme? or do I have to use the LAN ports, which limit the speed to 100mbs.

  On the Time Capsule Ethernet ports are all 1 Gbps ones. Unfortunately, the Express are only 100 Mbit/s. The connection between the router and the extreme should be 1 Gbit/s. In turn, the attached devices to the extreme have the potential to be at 1 Gbps.

  2. what parameters the extreme must be set to.

  Both the extreme and the router must be configured for a mobile network. In this type of network, each wireless router will broadcast its own Wi - Fi network, but each network will use the same network (SSID, aka) name and use the same type of wireless security & the password. You have then the possibility to connect either or both express base stations by wire or wireless network.

  3. can I run ethernet cable from the router Verizon to Airport express and still have the network under a parasol in airport utility (i.e. having airplay on the speakers of the express). or do I have to switch the extreme ethernet cables to the express.

  Yes, in a mobile network. You want all the base stations connected to the Verizon router in this mode.

  4 should. what settings I change my express? (currently its to expand the wifi network)

  That depends on your goal with Express base stations. By your excellent diagram, you can only use it for streaming. In this case they would just set up to join the roaming wireless network.

  Another thing. Before drilling holes, you can consider using Powerline adapters instead. These take advantage of the circuit of electrical wiring of your existing home to create the pseudo Ethernet those. In your case, you would need a minimum of two of these cards. One at the location of the Verizon router and another to the new location of the extreme in the living room. In turn, you would connect a heel Ethernet cable between the router / extreme and the adapter. No need for holes. These adapter came along the way in performance.

• TestStand user names

  Hello

  I would like to know where the user names and passwords are stored in teststand, so that I can copy the same file to a version update of teststand.

  It's just to know.

  Thank you

  Krishna

  Hey Krishna,.

  They are stored in the file Users.ini.  It is located in the directory Cfg in your folder TestStand.  So, something like this: C:\Program NIUninstaller Instruments\TestStand 4.1.1\Cfg.  They changed the Cfg folder location in recent versions of TS.  In addition, the recently changed to a txt file in a binary file, so I don't know how portable it will take place from older versions to the latest.

  TS, you can go to configure > Station Options.  Then click User Manager.  Uncheck the default box, and find the old Users.ini file.  If it works, then you can remove the old one and hover over another in the Cfg folder.  Then recheck the default zone.

  We have a Users.ini file on a shared drive and point to it all our test stations.  Then, we can just edit this shared copy and all stations to see.

  Hope this helps,

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• Media Center cannot detect the CBS signal

  When I connect my antenna directly to the TV, I pick up CBS (channel 19-1) live without any problems, but no matter what I do or I place the antenna, when I connect the antenna to my dvr PC, Windows Media Center does not detect any signal of CBS and the intensity of the signal never changes.  All others, the stations/channels are, even those from Akron, who are believed to have weak signals.  I tried to add a new channel 19-1 with the frequency provided online, but WMC will not let me create another channel to 19-1, indicating the number of the channel is already in use even when the original channel is deselected. I have a friend in the region, which also runs a PC dvr and he says that he can not get CBS via WMC or another.

  Any ideas?

  PS. The PC dvr currently has Windows Vista, but I intend to upgrade to Windows 7 in the near future.

  Hello

  I suggest you post this question in the community of Experts Windows for
  Windows Media Center.
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx