All in one C7280 printer has become unable to fax after switching to ATT Uverse

Similar Questions

• HP all-in - One C7280 print super slow... same test print windows

  My C7280 was good wireless printing... I have since moved the printer in another room, which is right next to my wireless router and now it prints super slow.  It takes minutes for a black and white page.  It almost seems that it is printing on very high resolution and prints 2-3 lines then pauses then prints a little more and takes over the ground.  Any advice or ideas is appreciated!

  It's like the thing as being too close to the wireless router, try to move at least 15 feet away.  Also, just turn and then again, sometimes, which erases the slow printing.

• Dell 942 all-in-one inkjet printer has stopped working with windows 8.1

  Printer drivers are installed. When you try to print the document doesn't seem to be in Quebec, then disappears.  Windows says it's not compatible, but I was able to scan documents. Any help would be appreciated!

  ozmoses,

  8.1 Windows comes with Internet Explorer 11. I hope that the original version is up and running. Windows Update comes from Internet Explorer 11 for Windows 7 and 8, and it has caused problems of print spooler. We found that removing IE11 and going back to IE 10 or an earlier version has solved this problem. Something you can't do with Windows 8. Unless there was an update to Internet Explorer is the last month or two that you can remove, issues of print spooler will perform until Microsoft releases an update.

  Rick

• HP Envy 4501 e-all-in-one inkjet printer has an included fax?

  AS THAT HAS FAX CAPABILITY?

  firedette wrote:
  

  AS THAT HAS FAX CAPABILITY?

  Hello

  Not as shown:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=5368519

  Kind regards.

• Dell 964 all in one Photo Printer not Scan

  I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

  I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

  Scan failed

  Try these solutions:

  * Make sure the all-in-one is powered.  (IT IS).

  * Disconnect and reconnect the USB cable.  (I DID.)

  * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

  * Restart the computer. (I DID.)

  Nothing has worked.

  Does anyone have any suggestions?

  Thank you.

  ColemanCreative,

  You should be able to scan from the Dell all-in-one Center.

  Make sure that the application that you want to scan to figure on the list. Try to read...

  Update of the list of applications to send scans to

  If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• F2110 All In One HP: Printer prints blue instead of green

  I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

  Hi @andalcam,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

  The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

  Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

  My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

  I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

  http://goo.GL/9oXc9

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

• I just bought the teachers edition and Creative Cloud student (one year) and I'm unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

  I just bought the teachers edition and Creative Cloud student (one year) and I'm unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

  See if the following can help:

  Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

  https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

  Hi, sorry in advance if I am dumb.

  How can I make sure the photo by email to my HP Photosmart Plus e-All-In-One B210 series are printed on 10x15cm photo paper?

  In fact, how I want to print any photo is printed on paper 10x15cm.

  Thanks for the research and forecast of some indication of this dilemma, I have

  Hi tabby1471,

  All photos sent by e-mail to print prints on a default size of the format 4 "x 6" photo. "

  There is currently no way to change the size of the paper.

  Thank you

• J4680 ALL IN ONE: POWER PRINT; UNABLE TO FAX OR SCAN CONNECTED WIRELESS.

  ERROR MESSAGE CONSTANTLY ERROR 358

  Hey @GS44,

  Welcome to the Forums of HP's Support.

  I understand that you encounter some issues an error message when scanning for your Officejet J4680 all-in-One printer to your computer Mac OSX 10.11. I can help you with that, but I'll need to know if you see the message on your computer or a printer. I also need to know what program you want to scan to. and if you are able to make a copy of the façade. Once I know that I will be better able to help you.

• Printer all-in-one screen display has changed from his usual display of a broader look "safe mode".

  When I click on the all-in-one printer, it happens on my monitor screen different than what it allows.  Now, it seems that it is in "safe mode" and I'm not able to use its features as before.  Why is this happening and how can I get this back to its original state?

  Hi Doris Workman,.

  1. What is the brand and model of the printer?
  2. are you referring to the computer screen or the printer?
  3. what function you are trying to use?
  4. don't you make changes to the computer before the show?

  If you are referring to the screen on the All in one printer, then I suggest you to contact the manufacture of the printer.

  Provide more information to help you best.

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.