Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

Similar Questions

• HP Photosmart Plus e-All-in-One B210 series: addition of a 6 x 6 custom paper size

  Help!  I would like to print on a sheet of paper of 6 x 6.

  Please tell me how I can get the printer to recognize that it is a normal piece of paper - I have to add as a custom for the printer driver size?  How do I do that?  I tried many things and I am yet to come errors.

  Hello linnylin22,

  Yes, you will need to add it as a custom size.  To do this, you need to install a different driver.  Please, take a look at this post for instructions on how to do this, depending on your operating system.  Deskjet 450 driver should allow you to change the paper size and the size of the document to 6 x 6.

  Please let me know if this helps solve your problem.

  Good luck!

• How can I know which B210 series I? a, b, c and d? HP Photosmart Plus e-all-in-one B210 series

  Unable to find information.

  Check the label on the bottom or back of the printer.  If this isn't there, open the door as if to replace ink and look for a label.

• Installation printer HP Photosmart Premium e-All-In-One C310 series

  I'm product HP Photosmart Premium e-All-in-One C310 series printer with code produces CN503A and model #C310a. There are 564 HP, ink cartridges. everything was going well until I installed the ink that I bought and it said I had to install the ink supplied with the product; no ink came with it and I had to buy it.  Rep me chosen good staples ink and corresponding to all the symbols. IE installation to INSTALLATION provided with the printer ink cartridges, then close the ink access door to continue.  only problem is that I did not SETUP ink. I talked to HP rep and they said selling printers don't come with ink cartridges, I bought and installation.  any other ideas?

  The first series used in the C310a cartrdiges are cartridges special "setup."  You will need to Contact HP for a replacement.  After the initial installation, the replacement cartridges you have will work.

• HP Photosmart Plus e - all in one, failure ink system, Oxc190013

  HP Photosmart Plus e-all in one, read the error message failure, Oxc190013, ink on iMac system, ' the printhead has failed and can print is no longer.  3 color cartridges work but does not print black ink. I checked the surveys of the cartridge and the black is about half full, and it's a HP 564XL. I also removed the cartridge and the pad has not dried out. Is - fixable?

  zekefreak

  See the following link

  http://support.HP.com/us-en/document/c02142902

  If you have followed all the steps, contact hp support and see if a replacement print head resolves the problem. Good luck!

• I have a Photosmart Plus B210a all in one. Automatic adjustment of photos.

  I have a Photosmart Plus B210a all in one Photosmart. This allows to adjust the pictures to print. How can I disable this feature?

  To disable management of the image when you print, you will need access to printing preferences Advanced Options.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. select print options.
  5. click on the Advanced button.
  6. change the on off ICM ICM method.

  Let me know what happens.

• Photosmart Plus, e-all-in-one B210a... product #CN216A

  Photosmart Plus e-all-in-one B210a... product #CN216A.

  I need to know how do I set up my printer so I don't have to retype the security key whenever I turn it on?

  Okay, well, the router is not the problem.  Printer is very close to the router?  You can change the router 11 channel to another?

  Another idea is to not turn off the printer.  He will go to sleep on its own after a few minutes of non-use and use about the same amount of power as when you turn it off.

  Now, if you turn power completely off to the printer (as in cutting its power strip) that would explain the loss of password.  The printer must always at least a little bit of power to maintain its clock and some memory functions.

• Failed to install the new printer HP Photosmart 7510 e-all-in-one in my PC

  I just bought the printer all-in-one above and when I try to install the software in my PC, with the cd or by downloading the HP web site, it always installing interruption and shows a window with a Setup error.

  HP support has worked with this problem and they tell me it's something related to my configuratipn PC. I tried to install this software in a desktop computer and it worked fine.

  Could someone provide assistance? Thank you.

  Francisco Alcon

  Hi Mr. FRANCISCO ALCON.

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Follow the form of measures troubleshooting this link and check if that helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=5070118

  See also:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=5070118

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• HP photosmart premium e-all in one C310 series scanning issues

  Hello

  I have a hp photosmart e - all premium in one C310 series which I connected to my new computer windows 8.  The printer works but not the scanner and I can not get more information on how to operate? Can you please advise on how to get connected?  The installation of disc for drivers does not work.

  Thank you

  Hello

  Go here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=es&CC=co&TaskID=135&prodTypeId=18972&prodSeriesId=4023238
  Select your printer and the fetch your drivers Windows 8.
  Those who will restore your missing feature to scan.
  Kind regards
  Carlos

• problem printing with HP deskjet 3050 all in one J610 series

  I have a printer HP deskjet 3050 all-in-one series J610 which I use with Windows Vista Version 6.0 (Build 6006: Service pack 2).  The connection is by USB port.  I have not used the printer for a while, but did all the maintence checks & it's good to go.  When I want to print a letter the only thing that is printed is the e-mail address that is blue in color.  I think the problem is in the settings of the features of the printer.  I can print the letter in gray scale, but it is not easy to read and is not suitable for business relationships.

  I would appreciate help with this problem.  A definition of the terms used in the features of the printer can help me to solve it in myself.

  Thank you

  I had a computer guy watch the printer for me.  It was broken & he just buy a new, he said.  I did it.

  So thanks for trying to help.

• scanner can not find the printer hp photosmart 6510 e all-in-one

  I tried all the help and downloads to try that works - I don't have the disk.  Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan.  He says that it cannot find the printer.  I tried to download all the drivers etc from windows, hp Web site.  He says, make sure that it is connected to my computer?  If the printer is connected wireless why my scanner isn't?

  There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance

• Printer HP Photosmart 6510 e-All-in-One no ANALYSIS DO NOT THE PAGE WHOLE?

  Does anyone else have this problem?  I tried to scan a brochure, which I can have a file in my computer and throw the paper, but it keeps half the analysis page.  Is there something I need to do?  Any help would be appreciated, thanks.

  (I'm scanning it wireless if it has something to do with it, which I doubt)

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• HP PHOTOSMART MORE e-ALL-IN-ONE B210 script error from the main PC series

  I have the above, wireless printer that is connected to the main desktop computer.

  The printer prints, scans, etc., of other devices in the office... including iPhones, laptops, laptops etc.,... Not this one!

  I get the same msg of error JUST FROM THIS COMPUTER!      as follows:

  An error has occurred in the script on this page

  Online: 2072

  Char: 1

  Error: Argument or invalid procedure call

  URL: res://ieframe.dll/preview.js

  Do you want to continue running scripts on this page?

  Yes                            No

  PS. I am running windows 7

  Maybe http://support.microsoft.com/kb/2652062

• HP Photosmart Wireless e-All-in-One B110 series

  I tried to print and the printer was going to pull a lot of paper at a time, I braked the document below to go after the first page, this information came «ink system failure, 0xc19a0003.» Please turn printer and then turn it on again. »

  I turn the printer power off and power on, but the message still appears on the screen, and the HP Solution Center shows the printer as disconnected.

  Please help solve this problem, as the printer is necessary for the preparation of exams.

  Thank you.

  MOK

  Hello

  Please follow the steps mentioned in the following link,

  http://support.HP.com/us-en/document/c03081973

• Series HP Photosmart Wireless e-All-in-One B110. I can't install the driver and software

  Hello

  I formatted my computer and reinstall windows 7 64 bit, I reinstalled many software (windows office and so on...), but I can't not reinstalled driver software for my printer Hp Photosmart Wireless e-All-in-One B110 series. When I insert the original cd of HP at the start of the installation but after 1 minute is displayed error

  

  I downloaded the dirver software from HP Web site, I tried to install it, but pops up the same error

  What can I do?

  Thank you

  Hi banzafa,

  I see that you get a runtime error when trying to install your software, and you have recently reinstalled WIndows 7 64 on your PC. Please follow the steps below and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_enu_140_126.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.