All-in-one HP Photosmart 2610: I can do for my (old faithful) Photosmart 2610 work with Windows 8.1?

Similar Questions

• I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  Never mind.  I thought about it all.  Thanks anyway.

• Can't get HP Desk jet 722C to work with Windows 7 64 bit

  I have an old HP Deskjet 722C I have used successfully for years, most recently with Vista Home Edition 32 (as well as with my XP laptop). I can't work with Windows 7 64 bit. There is no Win7/Vista drivers on the HP site for download. Bed in installs but does not print. The printer is found and installed, but nothing comes out when I try to print.

  Note that I have a parallel to USB converter on this printer, I have used / use with XP and Vista successfully.

  I see a lot of threads print say download the driver and run it in 32-bit mode to Vista. Since there is no driver to download I can't do. Convenience store is empty as well. Any other suggestions.

  Thank you

  Hello
  Welcome to the Microsoft answers site.
   
  HP C 722 Desk jet is not compatible with Windows 7 64 bit, then I suggest you contact the manufacturer.
   
  You can also check the compatibility, here is the link:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/b9ec9fc0-8121-48af-9d9d-8ee4c9f8c7fb

  Thank you and best regards,
  Azam - Microsoft Support

• How can Lexmark Z35, I get my printer to work with Windows 7?

  How can I get my printer to work with Windows 7?

  By looking at a site help on the lexmark, however this not is not supported under win7

• How can I download a replacement for my Photoshop CS2 that will work with Windows 10

  Currently, I use Photoshop CS2.  I'll buy a Pro 4 of Microsoft Surface.  I can download a Photoshop CS2 that will work with Windows 10 because my CD to install the replacement product is no longer usable?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• How can animated GIFs, I do to make them work with Windows 7?

  I can't do the animated GIFs to work after that I have download on my computer.

  I tried to get a few new avatars and for some reason that I can't animated GIFs to work after that I have download it to my computer, they remain as an ordinary image. For example, if I tried to get ith animated GIFs

  .
  http://www.glitter-graphics.com/down...100&height=100

  So I followed the directions [with the right button on the image below and select "save under" only for personal purposes: Please do not send to other sites.] (see our TOS)]   and always get a still image. What I am doing wrong?

  What is going on with everything I tried to copy or download animated GIFs, never had this problem with Windows XP.
  Now I have windows 7.

  Help? anyone?

  Thank you

  Have a look here.

  Panel\All Control Panel Items\Default programs, "Associate a type of file or Protocol with a program", the command on my machine the default program for .gif is Internet Explorer.  Which appear to indicate a page full of IE with an animated .gif, maybe you need a third party program to do what you want?

  Go to IE tools/internet options/advanced/multimedia. Make sure that the option to play the animations is turned on. If no joy, make sure that your connections are associated with Internet Explorer - if you click on a .gif file in windows Explorer, IE should open to view it.  Some security software can disable the animation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  See what is here if you are looking for Avatars.
  http://www.Google.com.au/search?q=avatars+download&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = d8t6TOL4JIPJce2Z4PcF

• Need driver for HP Photosmart 100 work with Windows 7 64 bit

  Anyone know where you can get a printer driver for the HP Photosmart 100 printer? II'm under 64-bit Windows 7 and can't find a driver anywhere. I have the original disc, but it shows be good only as far as Windows XP (Service Pack 3). Any help would be appreciated.

  JDRomine

  Hi @JDRomine,

  By your post, I see that you need drivers for your Photosmart 100 printer. I can help you.

  I checked online, and unfortunately there is no driver available for Windows 7.

  But you could install a generic driver that should work.

  On the computer, go to start, devices and printers, select Add a printer.

  Follow the steps, select HP and Deskjet 9800, Deskjet 450 or the Deskjet 990, from the list. (even if you have a photosmart)

  Have a great day!
  Thank you.

• How can I get HP 3050 multifunction Scanner to work with Windows 7?

  When I hit the scan button and then start scan the printer reads "not installed on the PC" the functions of the printer and fax work via the computer.  I went online and found three sets of drivers for Windows 7 64-bit

  PCL 6 x 64

  Post Script x 64

  PCL 5 x 64

  How do you know that one to download?  If I download the wrong one, will be I live to the top of the machine?  Help!

  The problem is not that you should download one of these 3 drivers Windows 7 already comes with the driver. The problem is that HP Universal drivers don't support scanning in the same way that you're used to. If you look at the "Software" section near the bottom of the HP driver download page , you will see a link that says "HP Color LaserJet and products LaserJet AiO/MFP - use the Scan and the software of Fax on Windows 7" with a link 'get software' on the right which will take you to the next page of the instructions: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136 .

• How can I get my Canoscan n670u scanner to work with Windows 8?

  Hello

  I've upgraded from Vista to Windows 8 and was happy to see Win8 instantly detected my trusty Canoscan n670u scanner and recognized as a connected device. It is, therefore, correctly identified, in Device Manager, I tested the scanner via Device Manager and diagnostics is well spent - it buzzed away, and the screen displays a message about successful test. Large.

  However, when I use the Wizard Windows Fax Scan & and click new scan, I get the message no detected scan.

  Whuh?

  I tried to acquire an image using Onenote. The scanner passed through calibration, apparently successfully, then as he was about to start scanning, came to a stop with an error message.

  Help! It's a good piece of hardware. What I don't really understand not is Win8 apparently automatically detected and installed the drivers for it, but will not let me scan anything. ???

  Any suggestions?

  AH HA!

  He fixed the this morning.

  I have downloaded the Vista version of the "Canoscan Toolbox" software on the Canon's Support site (http://www.canon.co.uk/Support/Consumer_Products/products/scanners/CanoScan_series/CanoScan_N670U.aspx?type=download&page=1), installed and run the Compatibility Wizard. Success!

  Scanner works fine, although the software seems to forget default each I close.

  I don't care.

  Thanks for your reply though - if someone else asks that you can point their to this!

• How can I get my Dell 720 printer to work with Windows 7 on a Dell Inspiron 6400, because I can't find the correct driver?

  My Dell Inspiron 6400 'Windows Vista' has been updated for "Windows 7" and the Dell 720 printer has stopped working.

  There are possible solutions here...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cannot-get-Dell-720-printer-to-print-Windows-7/ab2cec8f-B267-4654-9f5f-9e9a48eac1c0

  Tricky

• I can't Paint Shop Pro X 3 to work with Windows 8

  He opens the first screen showing PSP X 3, but then immediately said... the following program stopped working and needs to close.

  Why don't you just install the update PSPX3 SP5?

  I just did that and it works fine.

• Can't get my HP Laser JEt 1300 to work with windows 8.1

  Not sure if Im missing a step, but I can't get my Laser Jet 1300 to work with windows 8.1. Brand new computer and have spend 9 hours trying to install this.  Must be missing a step. I get an error message after clicking on the button print...

  You use a USB cable & not a parallel adapter?

  Did you use a Dot4 port questioned?

• I can't receive faxes on my all-in-one HP Photosmart 3100

  I recently installed Windows 7 32 bit. Now I can't receive faxes on my all-in-one HP Photosmart 3100

  Hello Travis_C,

  I managed to fix this problem in all things, read the manual. It seems that the automatic response was some how turned 'OFF' and this is why no faxes received. Thanks for your reply,

  See you soon

  BJP1

• How can I remove the personal info of all-in-one HP Photosmart Premium C309 Fax?

  I want to sell all-in-one HP Photosmart C309 of my daughter. I did a reset using the # and 9. Should I do something else?

  Hi, the reset #9 should be enough

• Photosmart C4280 all-in-one: HP Photosmart C4280 Scan features do not work with Windows 10

  S s s s today, there is no drivers for printing or scanning of the utilities on the HP site. I was able to get to join the TRIOUX printer, butttttnosaninfunctions work with the push button on the machine. Also, because I lost the original CD that came with it, I can't scan utilities to work. I don't know that the same CD would work with Windows 10. In any case, HP will be an upgrade of Windows 10 for this printer include the scanning of the functions? Thank you

  Hey @Rong1,

  Welcome to the Forums of HP Support!

  I see you want to use the features of printing and scanning of your HP Photosmart C4280 all-in-One Printer on your computer Windows 10. I want to help you with this today. I'm happy to announce that the full feature software and drivers are available for your printer!  Just pilots have not yet been added under Windows 10 drop-down list on our Web site. However, I will you link to the driver package to install your printer. Please follow the steps below.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Photosmart camera does not currently installed on your computer.

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your Camera HP Photosmart. If you see your HP Photosmart listed, click on it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your Camera HP Photosmart. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. search for your HP Photosmart driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Please reply to this message with the result of your installation. Good luck!