All M1212nf in a Doc feeder Fax upwards or downwards? Seems there is no answer insurance online? one

Similar Questions

• HELP NEEDED PLS EMERGENCY! -All new V313w printer paper feed - and apparently out of warranty already? If no support online?

  I bought a new laptop and printer V313w all-in-one a month ago. and I only turned on the printer for the first time today because of a need to send invitations to an upcoming event.

  I used the printer to print envelopes and about 15 sheets of specialty paper. Until all of a sudden it starts to chew the paper and do not supply through everything in print.

  I check online for drivers and updates and download all the relevant files. Try again and still has the same problem, whenever I have print now it chews paper. in fact, it looks like the print head is ripping through the paper.

  I try to find online for assistance too find that apparently it is already out of warranty?

  Everyone here has similar problems with the V313w? Is really starting to get frustrated, because I can't even contact Dell for assistance as I apparently no guarantee?

  Any help from people out there would be appreciated. I really need to try to get the last few invitations printed. (and I'm not buying a printer in order to 15 pieces of paper! only to have to throw it out and by another brand)

  Thank you in advance.

  Thanks for your reply.

  After about 3 hours of trial and error. (and a lot of paper wasted and torn). I found the problem.

  V313w paper feeding, there are several small curlers who seem to be held in place using small springs. they are really hard to do because there is only one opening to remove the jammed paper. in my case, two of these rolls were lower than the rest. This has created in turn issues when printing because it would interrupt the queue through paper.

  After many difficulties, I finished with a set of pliers tweezers for these rolls in line with the rest of the rolls.

  Because now the printer seems to work, so I just assume that these rollers must have been shaken loose / out of position during childbirth.

  So for anyone having problems similar to the printer not feed paper and ripping upward, then check out these small rollers to ensure that it does not obstruct the paper to move through as expected.

• When fax don't you put paper face upwards or downwards on the fax board

  I have a printer 7525, I would like to know if you place the document face upwards or downwards on the fax board

  ejm40

  Welcome to the Community Forum of HP.

  Your User Guide, Page 25:

  To send a standard fax from the printer control panel

  1. Load your original face up to print to the bottom in the right front corner of the glass or the side to be printed in the automatic document feeder.
  2. Touch Fax.
  3. Enter the fax number using the keypad.

  Your printer Support pages:

  E-all-in-one printer drivers HP Photosmart 7525

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 7520 (new) Auto Doc feeder does not work screaming loud noise.

  I just bought this new in box of a second party.  He was obviously nine original bag/Ribbon plastic on the entire unit.  Everything works fine but the car doc feeeder on power unit it is that loud screetching noise sounds like there is always a piece of tape somewhere.  I looked everywhere in TI lifted lids etc.  I had several hp printers and scanners with feeders doc auto know so well.  When you try to use the doc feeder it will move a few short clicks then paper error anyway inseterted, when I click to start a second or third time it advances once again very shortly.  I am handy with tools, etc.. Any suggestions?  Maybe it's under warranty even though I'm not 'original '?

  Thank you

  Stem

  Hey Capt-Rod,

  It is quite possible that the printer is under warranty. It is not based on the buyer, but according to the serial number of the printer. Please, either use the following link. Check your product warranty or call HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  From your description, it seems that you have done the troubleshooting necessary, but please plan to take a look at the following link. HP Photosmart 7520 e-all-in-one printer series - when using the ADF, one "original jam: clear jam and press OK' Message displays on the all-in-one."

  You will find a not just yet, you will need to complete and could very well solve the problem.

  I hope this helps.

• can I activate the written portion of the paper upwards or downwards when faxing from my hp officejet plus 8600 fax

  I would like to know how to load my documents on my hp officejet 8600 and all in one printer? Can I load the documents with the writing facing upwards or downwards when faxing?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. If you use the charger dessu then: place the side you want to fax to the TOP.
  2. If you use the flat bed, then: place the side you want to fax to the bottom.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• The line to the bottom of the page when copying using the doc feeder

  I have a jet of office pro 8500 lower thread which has just started to have a line all the way down the page when I use the doc feeder to copy. I don't have this line when I copy from the glass. There is no line when I print. I cleaned the glass and the doc feeder roller. Any answer how to stop this. Thanks for any help

  It is probably a small spot on the glass used in the ADF for scanning. See Figure 5 in this document, which is the surface of glass that must be cleaned.

• scan doc feeder perpendicular black strip.

  My HP Officejet Pro 8630 scans a black band perpendicular Sun BUT only in the doc feeder.  The band is not physically printed on the document when it is scanned.  Charger doc copy perfectly, and scanning flat is perfect.  How can I fix it?  Hope I just clean something.  Curious to know why the driver alone doc - it is not a scanner separated is - this?

  Hello and welcome to the HP support community!

  A black band that appears when the upper tray is used is often due to a tiny grain of dirt or paper that is stuck in the narrow window that is right outside the window flat.  The scanner, camera itself parks in this slot, while the paper feeds past.

  Look for the band to the edge of the bucket.  Use canned air to blow everything that can be stuck there.

  I had this case with my HP AIO printer before and found the answer here on the Forum!

  WyreNut

• How will I know if my edge compositions animate will scale upwards or downwards to adjust the resolution of each mobile phone platform? iPhone 3s, 4, 4, 5 and 5 have all different resolutions. Can I use PNG or svg?

  I want to use Edge animate to create native application in PhoneGap Build. How will I know if my edge compositions animate will scale upwards or downwards to adjust the resolution of each mobile phone platform? iPhone 3s, 4, 4, 5 and 5 have all different resolutions. And I use PNG or svg?

  If you are using the sensitive scale that it will permanently scale.

  To view best practices regarding graphics

  M lively help | Best practices for graphics in Adobe Edge animate

• SBH20 impossible to adjust the volume upward or downward

  Everything is normal with the Xperia C3 for playing music and talking on the phone, but just unable to adjust the volume upward or downwards by volume of SBH20 keys...

  All solutions?

  THX, but problem solved by replacing just another in the garage

  Thought it was a production fault

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Cannot move preview pane upward or downward in the classic configuration

  Cannot move suddenly preview pane upward or downward in the classic configuration. Currently stuck at the bottom. Have to double-click to display a message... OS 10.11.3 retina IMac tried restarts. several attempts of keyboard and mouse.

  Don,

  Keep trying... I found that simply getting a good lens.

  You can also try this diet between Classic and Classic 'no '.

  

• BookmarkList springs on automaticall junk when you go upwards or downwards in the list of folders. How to prevent?

  BookmarkList springs on unwanted automatically when going upwards or downwards in the list of folders. How to prevent?

  Which may be caused by the presence of a few bookmarks with a long title in the main menu of bookmarks.
  
  The width of a column in the list of bookmarks is in the current versions of Firefox automatically adjusted the bookmark with the longest name.
  
  You can check the names of the bookmarks and the longer more short.

• Suddenly, I have a column on the left side of my screen shows all the latest tweets.  I didn't ask for this purpose; I certainly do not install it.  And I can't find a way to shut it down or remove it.  Someone out there has an answer?

  I do not know how to remove a column on the left side of my screen that can display applications of social networks and RSS Web site, that you want to appear.  I deleted all pet food but now I have an empty column and I want to delete this, and I can't find a way to shut it down or remove.  Someone out there has an answer?

  Box of Safari?

  Click on the sidebar button in the toolbar of Safari

  

  or

  Click on the 'View' menu in the menu bar of Safari and choose "Hide Sidebar".

• Touchpad on the laptop does not scroll upwards or downwards

  The touchpad on the laptop does not scroll upwards or downwards, I was offline for 5 weeks that my router broke out between the change of operator, so I had to wait for another.
  When I was on the touch pad was'nt working properly. I can't do a system restore, because that would be the former provider. Ideas anyone please?

  First, check the scrolling settings in the advanced settings of Touchpad.

  If they are enabled, uninstall the mouse/keyboard 3rdparty as Logitech or Microsoft and Watcom drivers that may have installed you.

  If it's no good, uninstall the Toshiba touchpad driver, then download and install the latest version.

• How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  You could try starting in safe mode:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Which can allow additional troubleshooting.

  Also, sometimes there may be a hardware problem which may help a SMC reset with

  Depending on the cause:

  • Reset the management system (SCM) controller on your Mac - Apple Support

  You can try the test equipment to see what appears in the results:

  • With the help of Apple Hardware Test - Apple Support

  Other options include an appointment with a genius of Apple Store or a

  service provider authorized Apple for the device inspected, diagnostic tests, etc.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  There may be system software or hardware problems, in order to solve the problems with the aim

  to see what the cause, can take time. If you have a backup in Time Machine &

  end by using OS X Recovery to see OS X Utilities usage, disk utility or

  other functions, be aware that this can make the more advanced features; It may not need.

  Because this question appears as a symptom in Safari, which makes it more curious.

  • Stop the pop-up ads and advertising on Safari - Apple Support

  http://etrecheck.com/ http://www.adwaremedic.com/index.php   

  There may be a weird extension in Safari that may relate to some adware or other

  elements, so this is another issue to consider. a report of Etrecheck may tell you if

  some candidates are there; but maybe not. I do not primarily use Safari

  so, my other two browsers work slightly differently.

  Good luck & happy computing!