All of a sudden my hp 1018 printer has stopped working

Similar Questions

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• All of a sudden my speakers, with helmets and stopped working so I have no sound.

  I have a Pavilion dv6 with beats audio and Windows 7 home.   All of a sudden I turned on my computer one day and had no sound at all.  I did not load something again and has not done something again.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Printer has stopped working - active service does not work

  Original title: my printer Hates Me

  So... Today, I want to print something... and my windows wrote the active service is not running. So I look at the printers... I have to it is called: USB MFT... I watch the drivers... they look ok. I try to reinstall them. Now even the windows and the driver package will not work. Everything is fine until I have to insert the printer (I downloaded the drivers on the right), then said: "the package could not be installed '... Then I rage and ask a more experienced user...

  Printer: Epson Stylus DX 4000
  Windows: Windows 7 Ultimate 64 - bit edition
  Please help me.

  Hello

  Follow the mentioned below of the methods.

  
  

  Method 1: Run system restore

  Video: Solving a problem using system restore

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/fixing-a-problem-using-system-restore

   

  Method 2: Solve printer problems.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Use the troubleshooter from the article above.

  
  

  Method 3: Download the latest drivers for the printer from Epson support Web page and install

  Drivers Epson and support.

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-DX4000-printer/drivers-support

  Check if the drivers are available for windows 7.

  Epson and Windows 7

  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• LaserJet P1102W: Printer has stopped working

  I've had my printer for over a year and never had a problem.  A few days ago the printer stopped working.  I tried to print and it would not allow me.  He wanted to come to save the document, instead of giving me the privilege to print the page.  I tried reloading the software and kept getting errors that the installation has failed.  I removed the software and tried to charge it and now I can't even load the drivers or downloads.  My mistakes are "a new printer was not installed.  I tried to click on the troubleshooting button and it says my "printer spooler does not work.  I tried to go into services and right click on "Printer Spooler" to start.  Still nothing.  I don't know what to do.  Can I get help from someone.  I've been at this for 3 days now, trying to use my CD to load the software to go on the HP website to download the software and drivers and still, I get the same errors.  It is a great printer and I don't want to have to replace it.  Please help >

  Hi cmspina,

  Thank you for joining the forums of HP Support for a solution to your printing problem.

  I understand that you use a printer HP LaserJet Pro P1102w with a Windows 7 PC, which ceased print and also, you can not reinstall the software and drivers for the printer. I would like to help with that.

  I would like to start by running the HP print and Scan Doctor. This tool allows to diagnose and fix the problem printer software and printing challenges.

  Please let me know if that solves the problem, or if you need assistance.

• somehow my printer has stopped working and the computer tells me that an unknown error has occurred - can someone tell me what happened

  My printer no longer works the computer tells me an unknown error has occurred, can you help me understand?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Dell 942 all-in-one inkjet printer has stopped working with windows 8.1

  Printer drivers are installed. When you try to print the document doesn't seem to be in Quebec, then disappears.  Windows says it's not compatible, but I was able to scan documents. Any help would be appreciated!

  ozmoses,

  8.1 Windows comes with Internet Explorer 11. I hope that the original version is up and running. Windows Update comes from Internet Explorer 11 for Windows 7 and 8, and it has caused problems of print spooler. We found that removing IE11 and going back to IE 10 or an earlier version has solved this problem. Something you can't do with Windows 8. Unless there was an update to Internet Explorer is the last month or two that you can remove, issues of print spooler will perform until Microsoft releases an update.

  Rick

• HP P1102W WIRELESS PRINTING HAS STOPPED WORKING

  Our P1102W lost the wi - fi connection and we cannot get it back.  Seems to be a printer WiFi issue.

  It is one of two HP printers (other is a 5510) using a wifi network at home (WPA2, w/password), accessible by a Dell laptop and an Apple MacBook AIr (mines).  Two computers can access the 5510.  Both lost the P1102W.

  The blue network on the P1102W is no longer regularly lights up.  By pressing the button on the P1102W wireless accomplishes nothing.  Electric bike achieves nothing (but used).  Moving the printer does not help.  P1102w works fine on USB key.

  We tried to reset the Modem and the router. No change.

  We have reinstalled the software. No change.

  We tried to run the instructions from HP to make the printer wireless using Printer HTML Config Utility, but there page does not load in Safari. (Very frustrating).

  Self test shows

  Firmwarer Datacode 20120814

  Version of the driver software = 20091104

  State of the information network not connected

  Hardware address = 00:00:00:00:00:00

  IPv4 = 0.0.0.0

  Subnet mask = 0.0.0.0

  default gateway = 0.0.0.0

  Hello name =

  802. 11 b / g wireless

  Status = active

  Comm mode = invest

  Name the network SSID = myuniquenetworkname

  = WPA/WPA2 authentication

  IP configured by = manual

  Server DHCP/BOOTP = 0.0.0.0

  0.0.0.0 WINS server

  Printing of pages = 6218 so far

  Hi @maddog8212 ,

  I see that you have lost connection with the P1102w wireless. I will definitely do my best to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the computer.

  I have provided Windows and Mac steps, you can choose how you want to set up the printer again.

  Windows as follows:

  Run the Wireless Setup to set up the printer on the network again.

  Go to start, all programs, HP, HP Laserjet P1102w, then select Wireless Network Configuration.

  Steps to configure the wireless.

  Then, unplug the USB cable.

  Test the printer.

  Mac as follows: (since you mentioned that you had the HTML option for your Mac)

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Close all applications.

  In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS or HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

  You should get a solid blue light on the printer in 1 minute about.

  Remove the USB driver, then add the network printer:

  Click on the Apple.
  Click on System Preferences.

  Click the printing and scanning.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Try to print.

  If you have run Setup for the wireless again on Mac in the first place, on the Windows computer, simply create a new port.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Wireless printing has stopped working, but ONLY on my G72... not on other computers on my network mobile home.

  Hello... I have a laptop of HP G72 under windows7 64 bit and a deskjet4500 of HP printer all in one with a home network of the G of Belkin Wireless. Wireless printing works very well for months and it STILL works from another laptop. I am able to print from the G72 with a USB cord but when I try wireless I have a printer of saying not connected error message. I tried to walk through the troubleshooting tips, but nothing seems to work. Anyone can help? Thank you!

  OK, lets run this utility from the troubled PC: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• room light e-mail print has stopped working

  room light print e-mail does not display a picture

  You have an option is set to show only selected or flagged photos?

  You have all of the selected pictures?   Are there photos selected in the grid before your departure for the print module?

  

  You use the 'Custom package' layout and not yet added to the page photo cells. ?

  

• I have 2 Gmail accounts that I use Thunderbird to work with. Suddenly, one of the accounts has stopped working (password requests).

  For a year I used without problem Thunderbird to work with two of my Gmail accounts without problems.
  I had been on a long trip for the last 2 weeks had not begun to Thunderbird. When I did it for the first time this morning, I couldn't work or another account with it.

  Reset, return all settings solved the problem for ONE of my accounts (the main!), but the other continues to refuse to work.
  Yes, I have IMAP and less secure device permissions enabled in the Gmail settings. I changed my passwords and their update on all ends and again, my main account works, but the other refuses to accept passwords, even though I know they are correct.

  I still get the "cannot connect to server imap.gmail.com ." Message and I am prompted for my password.

  No luck.

  Could someone help me novel?

  Thank you very much,

  Zea

  After digging around a few others, I finally managed to find the google site:

  https://support.Google.com/accounts/answer/6009563

  There is a link on the bottom, saying: "allow access". Click on this one, 'continue' and directly there after prompt to synchronize Thunderbird. That solved the problem.

  Synchronize Thunderbird now until my two accounts again.

  Thanks for all the help and all the world looking in there, I hope this helps the other 3 who clicked on they have the same problem.

  PS: In your web browser, you must be connected to the Google account with disorders!

• HP Smart printing has stopped working on my Chrome browser

  In recent months, I like to use HP Smart Printing on my Chrome browser. But since two or three days, he made no more start with print functions, when I click on the print icon HP Smart (Triple normal plaguing the right to the upper-left).

  But the icon is still there and also messages by clicking on the right mouse. Selb Google shows me under the URL chrome://extensions:

  Hi SWISSINDALO, here is what I did to get SMart Print installed 2.1 on my Chrome browser

  1. Install Smart Print from the HP Web site (it looks like you already did)
  2. Click the settings icon in the upper right window of Chrome (the icon of three horizontal bars)
  3. Scroll up to tools and then in the set of Extensions
  4. If the extension of intelligent printing is not listed, choose navigate the Gallery
  5. Search for "HP Smart Print" and then "add to Chrome.
  6. The intelligent print icon should appear in the upper right of your browser window

  Hope that helps you get the app installed on Chrome on your XP machine. In addition, the version of Chrome that I used on my machine was Version 24.0.1312.52 m

• DeskJet: Printer has stopped working

  There is a document in the print queue (12 pages that it is actually only 2 showing). It will not print and prevents any other print. Also it not "Cancel" so I'm stuck.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically multitask resolution of known issues for this problem. When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• HP Officejet Pro 8500 has more: printer has stopped working

  HP printer works well until 1 month ago.  print only through bluetooth.  Now when hit copy, the screen indicates can't copy, scan or fax.  put power off the printer and restart.  I made this numerpous time. with the same results.  and same opinion.

  Hello

  Scanner failure indicate a hardware failure of the bulb scanner and may require maintenance of the pritner.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971/

  Shlomi