All PQQ30A in a PX30t Qosmio - 01 G provide remote too?

Similar Questions

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• TV-video not all appear on television with Qosmio F10

  Hi people, need help. I set my f10 qosmio for playback on tv SCART (phillips) 32 "widescreen, what playing a dvd one-quarter of the image is cut off at the edge of the screen. If I move my mouse it the edge missing jumpers, then I lost a quarter on the left side. I tried allsorts and cannot understand it.

  Hello

  Have you tried to change the resolution of the screen? Try 1024 x 768.

  Good bye

• CPU goes to 100% svchost State takes all the resources on the Qosmio F10

  CPU goes to 100% svchost State takes all the resources. Norton can not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about this. Anyone out there have some help?

  Hey Buddy

  The same problem here. :( A universal solution is unknown to me but what I do is from the Task Manager. When svchost shows more than 90% of its use I simply stop this stupid process. After having done that, I can use my laptop without any problem and it will not happen again.

  After restarting the laptop, the same thing happens again. I checked some other forums but never found no reasonable explanation how manage this stupid question.

  If someone knows more please let us know.

• Lost all the podcasts of the iphone and itunes - backup went too - HELP!

  For some reason, all my podcasts FROM itunes and my iphone.

  Backup went too.

  Is it possible that I can access my itunes account and somehow to find the list of podcasts that I was subbed to so I can resub?

  Thank you

  See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Qosmio X 300 - Windows shows too little RAM

  Hi all

  I just bought X 300 with 4 GB of memory. When I looked at the "physical memory" in Windows Task Manager, it has only physical 1789 MB with 1056 Cached. It is this normal?

  I also installed "All the CPU Meter" for Windows sidebar... it shows the same thing.

  Is it true that if you set your virtual memory to a different drive (c:, not), it will improve performance.

  Thanks for your help.

  Windows XP and Vista 32 bit don t support 4GB RAM as Akuma said.
  Why?

  Well, the physical address space is used to treat more than just RAM. It s also used to treat all of the memory and some records presented by devices. So if your laptop or computer is configured with the maximum physical memory, some of this memory will be unusable because some of the physical address space is mapped to other uses.
  The following components are in need of memory address space:
  -PCI devices integrated these network adapters
  -Graphics cards
  -Sound cards

  However, to use 4 GB or more RAM, you must install a 64 bit as 64 bit Vista OS.

• Qosmio F20: burn DVD works too slowly

  My f20 says he has a dvd burner 8 x speed. but I bought a few brand dvd blank and only at 2 x the speed of combustion. I've tried different brands, but they all burn at 2 x speed. ideas please...

  I have very good experiences with the TDK blank DVD. I use them for my first laptop with DVD writer. I can really recommend it to you.

• after update to FF, all the sites say "this website does not provide identity information" - why?

  previous versions of firefox showed the firefox logo or the logo of the company on the left of the address. There is now a gray on the globe. is it safe to use and how do I fix this?

  You will only see the information if there is a secure connection HTTPS.

  • https://support.Mozilla.org/KB/site+identity+button
  • http://blog.Mozilla.org/UX/2012/06/site-identity-UI-updates/

• Qosmio F20-130: (infrared) remote control problem

  Hi guys,.

  got a little problem which I think I've seen on this forum before. My remote no longer works. Used to work properly. Now, with the laptop turned off and connected remotely, I can light up the lap top. However, it does nothing else. If I press a button, the red light on the remote flashes and the Red led on the receiver will Flash but nothing seems to happen.

  I checked in device manager and I have tried using another USB cable to connect the infra-red receiver. Any ideas on what could be the problem? There is no secret key which I pressed by accident is there which disables the remote control?

  Dave

  Hello

  I put t know if it helps but try to remove this command remotely in the Device Manager and unplugged the unit. After the new trial to restart to connect the remote control again.
  In addition, please check the batteries. I know the flesh of lights but nevertheless check.

• Qosmio PX30t - drive Blu - Ray Toshiba update for Windows 10

  After you download the updated Blu - Ray player for my all in one Px30t Qosmio on Windows 10.
  I read the following on the update page:

  Disc Blu - ray TOSHIBA (32/64 bit)
  Toshiba recommends installing this component which has been updated to support Windows 10
  You must manually uninstall this component of your computer so that this component updated to install.

  -----
  Then I uninstalled the reference software, then after running the update, a surprising window that called for the update
  could not be executed, because the installation program did not find the disk drive in my computer (is or isn't funny?)

  So for now I have not any player ready for Blu - Ray. How could I get a copy of the software Toshiba Blu - Ray disc player that's already installed with my computer?

  Please, I beg you! Could someone help with this 'funny' anomaly cop and provide me with a link to download the appropriate software. (Toshiba for Windows 8.1-10 Blu - Ray disc player).

  I'd really appreciate it!

  Thank you for your comments and clarification... can be useful to other Members here in the forum

• Qosmio F750 - what region Blu-ray?

  Hi all

  I have a Qosmio laptop, F750, with Blu - ray player.
  I would like to know what region it is or it is region free.

  See you soon
  Jackson

  I put t think its free region.
  Generally, the parameters can be checked in
  My computer-> drive CD / DVD-> right click Properties-> button of properties of CD Player / DVD-> DVD region tab

  Here, you can check which area has been defined and may change. But note! You can change this setting only a few times. I think that 4 or 5 times and then the option will be locked.

• Qosmio X 70-A596 PSPLTV: is it safe to Win 8.1 to win 10

  Hi all

  I have a Qosmio X 70 - A596 PSPLTV, is it safe to upgrade windows 8.1 for Windows 10?

  I have checked the support page and could not find the drivers for windows 10.

  I have improved my Qosmio X 70 - A PSPLTE three weeks ago. Upgrade went smooth, and since then, it works without any problem.

• How to use the Qosmio DX730 as screen

  I use All in One PC DX730 Qosmio.

  Is it possible to make the windows Start / computer to use the display as a monitor?

  Sometimes, I need to see a file on my old PC Tower and I would not have an additional screen for that - well on the DX730 is removed during this operation.

  Thank you for inform

  Hello
  your pc need a destop map grafik with an hdmi output, if there you can connect the Qosmio dx730 with your 'OLD' destop pc and use the Qosmio as a screen.

  I think it is the only possibility.

• Qosmio Player - where is it?

  Reading all the posts tv tuner probs talk a lot is said about Qosmioplayer. Where is he? I have a G20 and have tried to connect the tv via my tv in media Center. The software was loaded at the factory and I have a recovery disc qosmioplayer, just do not know how to use it! Thanks for your help.

  Hello

  Qosmio Player is installed on a partition of your device. If you want to start the Qosmio Player power must be set to off, then you must press the key with the symbol of the TV. (Monitor IN). But all the useful information on Qosmio Player and other functions that you can fins in the user manual. Select this check box.

  Good bye

• Differences of the G20-118 HDD and Qosmio Player

  Hi all.
  I purchased a Qosmio G20-118 and theres a small diference between the hard drive.
  It has two built in 80GB HD, but in the bios, I see the first HD 79 GB and the second as 80 GB.
  Where is the 1 GB missing from the first HD? Qosmio player?
  If this is the case, then the RAID function only works with two 79GB HDD so I lose 2 GB HARD drive plus the loss of space for the RAID function aditional. If a drop about 5 GB of HARD drive.
  How do I get arround this?
  What I need to get rid of Qosmio Player to have two HD 80 GB? If so, how can I get rid of him?

  Thank you!

  Hello

  You are right. The Qosmioplayer is preinstalled on the hidden partition. Because of this, the HARD disk capacity is less than 80 GB.

  In my opinion the Qosmioplayer is very nice and useful tool and it is not necessary to be deleted. If you want to use any ability of the second HARD disk do not use RAID option.

  Do the backup data on an external device. On this way, you will lose 1 GB available on both hard drives of 160 GB.

  Otherwise you must preinstall the unit with recovery media. After that the Qosmioplayer is deleted.