All the tools to monitor the temperature of the HARD drive?

Similar Questions

• not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

  not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

  I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

• BSOD & disappeared from all the HARD drives after it

  Hi all.

  I had a problem after a BSOD & now everything works fine. without a scientific reason :)

  the problem was. After wake found my screen showing: disk error reading (or not found) in a black screen
  rebooted & found in my bios that none of my 4 hard drives not found & could not be detected.
  After changing all the sata cables (like trying), the same thing.

  tried changing cable inserts in the jury. but in vain.

  has tried for 3 hours, then all of a sudden, everything is ok.

  I forgot to mention that the BSOD in the log file was:

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 7A
  BCP1: FFFFF6FC50018240
  BCP2: FFFFFFFFC000000E
  BCP3: 000000032D50F880
  BCP4: FFFFF8A003048668
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Thanks in advance :) & sorry for my language

  Reads like there is a connection of motherboard defective/sec

  The SSD, you run the utility of magician of Samsung?

• Reference Dell T610 with 5 hard drive problem (5x2TB) while create RAID 5 with all the HARD drive. :(

  Dear Sir.

  While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?

  I wait your helpful to my set.

  Thank you.

  silamay

  This is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all.  I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.

  I don't understand most of what you wrote.  You must activate the UEFI (below), then convert to GPT before installing Windows.

  silamay

  How can I install on a UEFI system?

  The T610 supports UEFI, but must be allowed.  Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.

  Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining.  Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.

• remove all the HARD drive recovery partition incl. disk partitions

  IM in the process of upgrading to vista 32-bit Ultimate edition - a Lenovo T61 laptop OS original vista home, comes with HARD 160 GB but only show 110 GB disk.
  There is the hidden for drive recovery partition. now, I've wanted this disk recovery partition removed for more space for important files of video editing.

  How can I remove this parition hidden containing the recovery disk?

  I bought the support for laptop recovery CD - I have no need of the hidden partition.

  in the process, I deleted the existing partition (not the hiiden recovery partition) and installed vista ultimate 32 and it lights without problem. I then installed
  the INF chipset utilitty downloaded from the Lenovo Web site, and then installed some drivers downloaded - and all in perfect condition smooth running.

  now, I decided to remove that hidden partition containing the disk recovery - whatever happens after that, I have the recovery CD.

  How to remove this hidden partition? TIA

  http://www.mydigitallife.info/2008/02/29/delete-and-remove-to-unlock-EISA-hidden-recovery-or-diagnostic-partition-in-Vista/

  The link above is General info re remove hidden restore partitions.

  "In some OEM system, such as IBM/Lenovo, is impossible to remove from Windows."

  This link below might be more to the point for you:

  http://Forum.NotebookReview.com/showthread.php?p=2367169

  Written by:

  hypertrophy
  Computer notebook evangelist

  Join Date: March 2007

  Messages: 437

  Reputation power: 7

  "" "This applies only to Windows Vista.

  * Make sure that you have backed up your OEM code before deleting the Rugged hidden

  The hidden restore Partition Lenovo is a protected partition, then you will not be able to remove it through disk management as you would with any other normal partition. You can use Diskpart. You can still use these steps to remove the hidden restore partition if you have already done a clean install, but you will need a 3rd party software to combine with the main partition. It is better if you remove the first hidden restore Partition, then cross with a clean install using one of the many guides available on this forum.

  Step 1.
  Burn recovery media. Type "Recovery media" (without the quotes) in the search in the Start Menu. Open the application and follow the instructions.

  Step 2.
  Open the application by typing Diskpart either 'Diskpart' (without the quotes) in the search, or type "Diskpart.exe" in run by pressing Windows key + R.

  Step 3.
  Now with open Diskpart, you must enter the following command lines:

  I. type "list disk" without the quotes and press ENTER.

  II. Type in "select disk 0" and press ENTER.

  III. then type in "list partition" and press ENTER.

  IV. then type in 'select partition x' x = the recovery partition you want to delete (I think it's 1, I do not remember) replace x with the number of recovery partition and press to enter.

  V. finally type in "delete partition override" and press ENTER.

  That should do the trick. Good luck!

  __________________
  T61 15.4 "

  Specific ThinkPad Vista 32/64 bit Clean Install Guide side.

  
  Delete Hidden Partition Lenovo's of recovery on Vista using Diskpart Guide.
  Of orev Vista Clean install and RAM Memtest module test Guides.
  The Lenovo wallpapers 1680 x 1050factory-installed.

  WARNING:
  Grain of salt applies in my view.

  See you soon. Mick Murphy - Microsoft partner

• Toshiba WT7-C-100 - I think I erased all of the HARD drive

  I tried to reset to factory my Tablet but I think I deleted all the hard drive. When turned on, it goes into a shell as the screen back. HELP please.

  Number of things spring to mind first...

  (1) how exactly you factory reset it?
  (2) are you able to access the boot / recovery screen? (Turn off, wait 10 seconds, plug the charger, hold the volume button upwards and the power button at the same time)
  (3) you did a backup stop cable OTG device and a flash disk HARD before reset you?

• Connect the HARD drive internal USB Satellite

  Hi all

  I try to reconnect to a computer laptop HDD in USB, but can not access.

  1. my old Satellite no longer lights up.
  2. I removed my HARD drive and connect it via an external USB box to my new Satellite.
  3. it is listed under disk drives Device Manager: "TOSHIBA MK2046GSX USB Device".
  4. I click on the button "complete" and can not get information except ability and no volume (disk is NTFS).
  5. in disk management, I get the error "data error (cyclic redundancy check)". the disc is "not initialized".

  NOTE: I've already put a password on the drive via the BIOS, I have of course I still not know that and I hope that it is to note the source of the problem...

  Thanks if you can help me with this question.

  Hello

  First of all: the HARD drive is not a problem if you can't turn on the laptop.

  If the HARD drive is faulty, you may not be able to boot the system, BUT you would be able to turn on the laptop.
  A home screen Toshiba usually appears at the beginning of the boot order.
  Do you see this screen?

  If not, then your RAM modules are defective or there is a severe motherboard issue.

• Remove the hard drive before sending for maintenance?

  Hi all, I'm somewhat new, so I hope that people can help me with this.

  My T400 mother board seems to be dead, which means I can't use the laptop at all. I called Lenovo service center and they told me to post my laptop for them (my warranty is still valid).

  However, I realized later that it was the small matter of trust all my data for them, so I called again to ask. A different operator recommended that I have remove all the hard drive before you post the phone for them. That's what I intend to do, but I forgot to ask if it was OK to remove the disk hard when there is a motherboard problem.

  Is it?

  No it will work as it did you do not have to do anything, it will have the same serial number of the system but have different material serial number

• How to unlock the hard drive

  Hello

  I tried to install linux kali with dual boot of windows 8, during the installation of linux of kali, I got an error so I stopped the installation and exit from it. Then when I restart windows not start its display of ms - dos. So I thougth windows has disappeared.

  So I insert the Dvd to reinstall windows windows and I'm in installation using dvd but here are theirs, his watch is not hard drives list, select the drive where you install the operating system.

  Then I chose repair option computer I chose pc refresh it is said that "the drive where windows is installed is locked' unclock the drive and then make pc refresh.

  PC resets also the same.

  Then, I chose automatic repair says cannot repair.

  And then after that I selected the command prompt and typed teas commands below

  (1) ' diskpart' - listdisk but his does not not hard drives I have

  (2) bootrec, fixmbr, sfc/scannow it says that the disk is write-protected

  And some other stuff that I saw in google, but none worked.

  Please help me someone.

  Hello

  Thanks for the reply

  But none of your works of idea I got a solution for this.

  I created a USB bootable for kali linux and linux via direct, I opened and under linux, gparted gparted there, I can see all the hard drive, so I formatted where linux is installed previously which she made niw I see hdd in windiws intallation

• I really liked the snapshot tool in the old acrobat. He cannot find in acrobat pro DC. All the hard to find ar tools. Where can I find the instant tool?

  I really liked the snapshot tool in the old acrobat. He cannot find in acrobat pro DC. All the hard to find ar tools. Where can I find the instant tool?

  Hi mitchellt65695629,

  You can find the "Take Snapshot" tool under the edition menu of Acrobat DC.

  A quick guide to Acrobat DC Adobe Acrobat workspace basics

  Kind regards
  Nicos

• 1297cb HP P7: lack of response from the hard drive or windows 7 to my monitor help

  Greetings.  I have a HP P7 1297cb, all original material except the memory and hard drive.

  Original OS at home, is now Pro.
  I thought that my hard drive has expired and bought a new WD 2 TB black.
  And I don't have the other HDD cause I already threw out.
  
  So, here I am.   I installed the WD Black again and nothing.  Monitor powers and that's it.
  I get a hard drive light to everything first, about 5 to 10 seconds and off.  Touch HD and feels light low race.
  All fans and fees lights.  Power light on.
  
  No NumLock or number lock lights.  Œuvres and key/monitor / mouse, as I am with them now.
  
  Shot four sticks of 2 GB memory and get the beep.  One at a time plugged in no beeps and back in.
  You use a Windows 7 Pro disk rebuild for installation.  When the computer starts, I tried F10, F12 and nothing.
  I even pulled the mobo battery for a few seconds.
  I disconnected the power supply cord (pc) and held in the power button for about 30 seconds.
  I even turned on with the installation disc in and waited (until at least 20 minutes) to see if the screen would change nothing.
  I am willing to check the cpu, which remains the only thing to check, I'm guessing that about it.
  I get no beep or beeps when the pc starts.
  
  So, I guess also, that my problem was not the hard drive in the first place. ???
  Thanks in advance for any help.

  gwolfman

  Hello;
  
  Let me welcome you on the HP forums!
  
  I don't know what a "Windows 7 Pro Rebuild disk'- so I don't know if it's any bootable media.

  Unless you changed the default device sequence in the start section of the configuration of the BIOS, it will look at the HDD FIRST and since it is empty, the PC will simply sit there - nothing to do.

  So, you must get to a boot device selection screen to boot from the DVD of Win7.

  The typical ways of doing are to press F9 or F12 - one of them will be implemented a unique boot device selection menu.  Then, you select the DVD drive and the PC should then restart.

  It can display a line of text at the top of the screen, something like «press any key to boot from...» "If Yes, press the space bar.

  If the DVD is good, the PC will then start on the initial screen for the installation of Windows.

  Good luck

• wipedrive tool allows to erase the hard drive

  Hello

  is there problem may occur if I erase all the % of files100 (the system vista, retrieving files... files) from the hard drive by wipedrive tool

  ?? and install windows 7

  I have a compaq presario V6000

  Just use the W7 installation disc to clean the disc. I always recommend what he got rid if Vista entirely. In this way there is no chance of getting errors because you're from "unallocated space" as if you put in a new hard drive of bran. Do the usual and create recovery disks in case you go back to Vista and of course to back up all your personal stuff to be reinstalled later.

  There is also a file on drive "C" called SwSetup which you must save it. Here are your drivers for Vista which will work in W7 and most importantly is the software that will not have the W7 installation disc, such as Microsoft Works, and I'm guessing that Cyberlink DVD suite. It is a very useful file.

  Once, you save all the things I said, then go for the clean installation. You will have less problems in the end.

  Here's a good tutorial on how to do a clean install of Cheryl. There a screen shot too.

  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  After installation, the first driver you want to load is your video card driver.

  I took a quick glance and there is no drivers for your model in W7, but like I said your Vista drivers should work fine.

  If this does not work you can always roll back to Vista with your recovery of the disc that I asked you to do.

  http://support.HP.com/us-en/document/c00809678

  Just to answer your question, I wouldn't wipe drive. In fact, it is not clean the disk. Filled it with a bunch of useless information so no one can retrieve what was already on the disk before. Wipe drive is used if you ever decide to take your computer to the recycling depot.

  Who does not resemble a very stable place to put a new OS if you use Wipe drive.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• How can I get all the files from the hard drive in the non-working Compaq Presario CQ62-411NR

  Ice tea seep keyboard laptop, and after drying it feeds on. If I try a hard reboot, it is stated that I would lose all the info in the memory and I can't afford to lose my mother pictures that are on the hard drive. Is it possible to get the hard drive to work in some other way so that I can get my photos and other files.

  You can remove the hard drive and put it in a USB Enclosure.Plug USB port, another machine, where you should be able to go through it and copy your photos off on the hard drive of the host computer.

  Example:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3743052 & catid = 2783