all updates of microsoft windows cannot check or install the new updates since 29/11/09

Similar Questions

• Windows XP hangs after installing the new drive hard & software

  My 20 GB hard drive was almost full and the computer (Dell GX240) has been slow, I installed a new 160 GB drive. After loading Windows XP, Linksys, McAfee, MS Office and MS Windows updates would crash randomly. Restart the system would allow him to run for a few minutes and then hang again.
  I reformatted the drive and partitioned to 80 GB and then reloaded all programs above with the same results.
  I reformatted back to 20 GB, loaded XP and Linksys and the same problem occurred.
  It seems that the internet has something to do with the problem.
  Any suggestions?

  "Wingnut555" wrote in message News: 6aac2f2a-ffb6-4a22-98e1-67417709eb6b...

  The drive of 20 GB that I removed to install the largest capacity disk has been reinstalled after the failure of a larger. I am currently running on the same pc and the old drive. I have another drive of 20 GB that had XP installed on it earlier. Thinking that I might try that one that I started to load some of my other programs operating and when I installed Office 2007 for household use and selected updates online blocked system shortly after. The problem is therefore not only on new facilities. The reader that I use currently a Office 2007 is installed and it works fine.

  What is the largest disk that will handle XP? I heard it's 137 GB, is it true? If I can make it work how would you recommend I have partition the drive of 160 GB?

  Thank you

  XP can handle drives of 1 TB to NTFS without problem - it's the motherboard on computers more elders who may have problems, that it is not compatible LBA.
  There is really no need to partition the disk, but I would tend to opt for about 60 GB for the operating system and 100 GB of data and then move the folder My Documents (using the option in its properties) of the data partition. This allows to separate the data and programs and means a lot less work if a reinstall is needed.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Have CS6 installed on Windows Vista, need to install the new computer of Windows 8

  The disc does not start the installation program. If I manually start the installation program, it requires a serial number. When I entered the serial number, he asked that the associated product and CS6 is not displayed in the drop-down option. (Extended CS6 is indicated, but not cs6).

  How can I get CS6 install on the new computer in Windows 8?

  Hello

  Welcome to the community!

  It seems that you bought an improved cs6 serial number and asked for an earlier version.

  You have a previous version of CS5.5 or CS5?

  Please contact Adobe support to discuss other options, check here: http://helpx.adobe.com/contact.html

  Thank you!

  Ankit

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• "Windows cannot check for updates" error Code 80080005.

  I have Vista Home Premium, Dell Dimension XPS 410.

  When Windows tries to automatically check the update of Windows, I get a message saying, ' Windows cannot check for updates.

  Error code 80080005.

  Can any ideas on how I fix? I've had this problem for over 3 months now and cannot find information on Microsoft Support Website.

  Thank you

  JA

  Hello drjoe_anzaldua,

  Thanks for posting on the Microsoft Answers forum.

  Usually the "Windows is unable to Check For Updates" error message produced always of the blocker window update connection attempt.

  1. first of all, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  2. check if Windows Firewall is blocking the update of Windows.

  Please see the following article for connection errors:

  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  After following the steps of troubleshooting in the article, if you still get an error message, thanks for posting again so that we can help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Cannot install Windows updates (Windows cannot check the updates)

  I have 10 computers networked with a Windows SBS11 server as a domain controller. The 10 computers, 6 of them are Windows 7 Pro (64 bit) and the other 4 are Windows Vista Pro (32 bit). All computers stopped Vista download of updates ago and which gives an error, the message "Windows cannot check for updates. When you try to check for updates manually or automatically that the error is displayed, but it should not be any problem with the updates are downloaded and installed on Windows 7 computers.

  I tried the following:

  -Ran the system update tool.

  -Execution of Malware Bytes and Vipre Antivirus analysis in safe mode. No infections found.

  -Disabled the firewall and restarted the search.

  -Reset the proxy server using the winhttp netsh from the command prompt.

  -Restarted Windows Update Services.

  -Ensure that the BITS Service is running.

  -GPO update for Windows updates not be configured on computers.

  -Change Windows Update settings to allow the manual update. Allowed for the updates to install, but after computer restart returned to the old settings and error appeared.

  If there are any other suggestions I would greatly appreciate.

  It is a forum for specific consumers. You will find support for Vista forums in these IT Pro: http://social.technet.microsoft.com/Forums/windows/en-US/home#category=windowsvistaitpro

  Note: If the Vista computers are not fully patched, they should not be connected to the internet or the local network!

• Error code Windows Update 80070490 and the message "Windows cannot check the updates.

  Windows Update 80070490 error code appeared yesterday (21 September 2013) and the message "Windows cannot check for updates. I'm using Windows Vista 32-bit, Service Pack 2. I tried almost all the suggestions on the Internet (including on Microsoft Web page) on this way to solve this problem, including Microsoft fixed it, the update of the system, file Windows Update DIAGCAB Diagnostics tool and etc, but still getting the message. The last successful update was on 13.09.2013.  All updates done before and September 13 are written as a 'success' in the folder "Update history", but when I open the folder "Installed updates", I don't see anything and it says "no update are installed on this computer", which is strange, because at the moment, Windows Update was made automatically without any problem.   Please help me to solve the problem with this error code.

  Thank you, you shared your experience with me, but I already solved the problem. Niemiro of Sysnative.com forum helped me for this

• "windows cannot check for updates ' and my automatic update is on

  * Title *.
  My computer says "windows cannot check for updates ' and my automatic update is on. Can someone help me with this problem?

  Gavextraordinare,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows vista sp2. Windows cannot check the updates. error 80070490 KB968389. last updated on this error 23/10/09

  Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work.  I haves Windows Vista Home Premium SP2

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Can't seem to make updates, receives the message on my task bar that says windows cannot check the updates.

  Original title: updates

  I am running vista home top and I can't seem to make the updates I have a message on my task bar that says windows cannot check the updates...

  Hello

  Microsoft still provides updates of Windows security until April 2017, but only for Vista SP2

  This is what covers the Extended Support.

  https://support.Microsoft.com/en-AU/lifecycle#GP/lifePolicy

  ___________________________________________

  Check to see if both SPS is installed:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  See you soon.

• Error "Windows cannot check for updates because the service is not running.

  I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

  Please read this article:

  http://support.Microsoft.com/kb/2730071/en-us

  Another suggestion is maybe disable the updates of Windows

  Reset.

  Activate the Windows updates.

  Try again. (Worked for some)

  http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

• Windows cannot check the updates...

  I'm running windows vista on my laptop at home. I get the message that windows cannot check the updates. There is no eroor code or anything other than "windows can't check for updates. When I try to manually check the edits he keeps just search and nothing happens. I left the computer for a full day's search, and nothing ever happens. any suggestions? I tried the Fixit but without success.

  Article KB971058-access via Internet Explorer 32-bit (only)

  Click here: reset Windows Update components and run the fix it 50202? default and aggressive mode.

  http://support.Microsoft.com/kb/971058>

  UTC/GMT is 12:33 Friday, September 21, 2012

• Windows cannot check the updates of error code 80080005

  My laptop is a Dell Inspiron I1720
  The processor is Intel Pentium Dual CPU T2310
  Windows Vista operating system

  There is an icon that appears in my task bar that says "Windows cannot check for updates.
  When I click on it it takes me to my page of Windows Update and I have the option to check the updates. But when I click that whatever he says 'Check updates' and the bar under just keeps going. There is no response.

  I tried checking update yesterday again. No answer there are really long, about 5-6 hours.

  Finally he appeared as

  Windows could not search for new updates.
  An error occurred when the new updates on your computer.
  Error (s) found: 80080005

  There are times when I turn on the laptop I get random pop ups saying "process host Windows stopped working. I guess that the problem might be related to that as well.

  This has happened for several months. Have not been able to update windows and so I can not download any program. I'm stuck without an anti-virus now because my anti-virus subscription has ended. But I can't download anything again because my windows is not updated.

  For now, I'm stuck here without an anti-virus and my laptop has been running very slow...

  Hello

  1. do you get an error message when you try to download programs?
  2. don't you make changes to the computer before the issue occur?

  Method 1
  Reset windows update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 2

  Perform the clean boot and check updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  http://www.Microsoft.com/download/en/default.aspx