All Windows programs do not work correctly. !

Similar Questions

• "Notification Dll has not been registered, program will not work correctly.

  Dell Inspiron 2200 windows configuration error "Notification dll has not been registered, program will not work correctly.

  I checked several sites to try to fix this error without success. I have uninstalled, reinstalled, tried an older driver.

  go into system and con +, with no luck at the moment. Ksperov is installed where an antivirus trying something here now, doubt it will work. I noticed that many people have had this error, but I have seen almost nothing that corrected the error?

  With all the Dell laptops out there, someone has fixed it now. Also I tried to record a certain dll with no luck.

  I can't find a dll that is labeld notification.dll?

  The wireless works, but it is worsening.

  Thanks, Bruce

  Hey Brucefl,

  Try to restart in a clean boot to see if this error message is caused by a third-party program/startup process. To do this, follow the steps in this troubleshooting guide:
  How to configure Windows XP to start in a "clean boot" State

  If the restart in a clean boot prevents the problem to appear, take a look at the list of programs and services (do not forget to check her hide all Microsoft services box on the Services tab) tab of msconfig. Try disabling the programs and services to see if you can isolate what programs and services is causing this error message to occur.

  Hope that helps, I look forward to hearing from you.

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Notification of wireless configuration, dll has not been registered, program will not work correctly

  notification of configuration wireless dll has not been registered program will not work correctly

  Hello

  1. when the message's product?
  2. don't you make changes to your machine before the problem?
  3. What is the number of brand and model of your computer?
  4. have you updated your wireless adapters?

  I would like you to follow the steps mentioned below.

  Step 1:

  Run SFC analysis on your machine to verify if this is related to the missing or corrupted system file.

  Step 2:

  Test in safe mode with networkproblem.

  Let us know the status of the issue.

  Step 3:

  You can also do System Restore to the point that your computer was working fine.

• Get a message that Windows Installer does not work correctly.

  Original title: Windows Installer problem

  I get a message that my Windows Installer is not workiing correctly.  What should I do?

  Thanks to all who tried to help.  I finally finished on the pone to a tech assistant who could still find a solution.  End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can.  Thanks again for your efforts.

• Windows 7 with the same error message of "Notfication dll has not been registered, program will not work correctly."

  This error message has started to come after have been a Setup screen saver display in Control Panel. It doesn't seem to do anything "not work properly", but it's pretty disgusting to see this error message every time. May is going to help me?

  Ann Snyder

  Coldwater, KS

  Hello

  If you know the name of the dll file, you can register it manually of elevated command prompt:

  Regsvr32 fullpath\yourfilename.dll

  How to run as administrator command prompt (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• My movie maker program does not work correctly. How can I download it again, or at least fix it? It's stop of allowing me to record the final sequence.

  Trying to save the profject ended up like a movie .wmv to my computer, it says «save on removable CD...» "but it is actually doing nothing.  He has never done this before.  It is also not working well even to work on project files.  Something is wrong with her, and I would like to reinstall or repair, but can't find it anywhere on Microsoft Download pages.  Any suggestions?

  Movie Maker is installed with Windows XP... There
  not a separate download. Also... it is updated
  with the SP2 of Win XP and Win XP SP3.

  I suspect that the maintenance of the system would
  more to improve the function of Movie Maker that
  He would reinstall.

  FWIW... better run on applications of editing video one
  machine is well maintained and fully implemented to date.

  You may have reached the limits of your system
  resources. Run the error checking, defragmentation and
  Disk Cleanup on a regular basis could help.

  And... disconnect the net and the closing of all
  programs, including your scanner for viruses before
  Opening Movie Maker can free up some resources.

  Add more RAM, increase the size of your
  Swap file and maintain a hard training that
  a 50% or more of free space can help.

  And you can have compatibility issues with your
  source files. Several formats are apparently compatible
  with Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  It is also possible that you have a problem with one
  video driver is damaged or outdated.

  Try to reduce your graphics hardware acceleration
  in accordance with the instructions in the following article.

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129.htm
  (scroll down to: "If you are using Windows 2000 or XP")

  If they improve the question, you should look for the
  site Web of MFG. your video card
  an updated video driver.

  And... the info might be worth a visit:

  ===
  The following steps previously offered by
  Carlos, MCSE is supposed to reinstall
  MM2.1.

  (you will need your Windows XP disc)

  1. go in C:\Windows\inf
  2. right-click on Moviemk.inf and click on install
  3. when it asks for your put Windows XP CD
  It in and find the I386 folder. Click OK
  ===

  Also... reinstall Windows XP SP3 should reinstall Movie Maker.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows XP Service Pack 3 network install package
  for developers and it professionals

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  More information:

  What can I do if I have upgraded to Windows XP SP2 and Windows
  Movie Maker 2.1 is not installed successfully?
  http://blogs.msdn.com/b/deanro/Archive/2005/01/18/355050.aspx

  Movie Maker 2.1 Installation
  http://www.Papajohn.org/mm2-setup-software-2_1.html

• "Stop" Windows function does not work correctly

  My windows stop does not. I can only close by manually pressing the power button or by Log off-change user-windows stop - stop.

  Pls help.

  Hello

  It's not easy to say why the closure works doesn t work.
  But above all harm or damage registry entries are responsible for these issues.
  You can try to use the System Restore tool to roll back the OS to the beginning.

  In addition, you can consult the Microsoft document that described the shutdown problems in Windows XP. It s useful. Check it out.
  http://support.Microsoft.com/kb/308029/en-us/

• the Windows Installer does not work correctly

  Hi am using windows 7 ultimate and the problem is when I install adobe reader, he settled not and displays windows install is not installed sucsses entirely which will be I do please someone help me

  Kunal Hey,.

  -What is the exact error that you receive when you install Adobe Reader?

  -Are you having the same problem during the installation of other programs?

  Here are some links you can try if the problem persists with Windows Installer troubleshooting.

  http://support.Microsoft.com/kb/2642495

  http://support.Microsoft.com/kb/2438651

  Note: The steps outlined in the agreement links above with the registry change. Please have a backup of the registry before trying the steps. http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  I hope this helps. If you have any questions, please let us know.

• Windows contacts does not work correctly.

  I have synced my HTC Evo to Windows Contacts.  I wanted to add contacts through my computer and then transfer to my phone I thought it would be easier (keyboard real vs knocking on the phone with fingers).  The problem is that my Windows Contacts opens and it doesn't have the complete list of options (add contacts, etc.). -It shows it as being a photo program (wants to burn or slide show).  How can I fix it?  I opened the program of the said Web page how to (Start menu > all programs > windows contacts).  On the screen shot here, I noticed that there is another icon in the menu bar indicating the location on the computer that the icon that I have in my menu bar.

  If the toolbar in Contacts doesn't have its normal icons, then the type of folder for Contacts is incorrect. To fix:
  Open windows contacts. Right-click somewhere in this empty white space to the right. Select Customize this folder,
  Click on the small triangle in the drop-down list, select Contacts, and then click OK.

• 11g says "you are using JDK 1_7_79, program may not work correctly" pls help

  Hi all

  I installed ODI 12 c on my laptop (windows 64-bit) and already installed 12 c repository database...

  Now, I tried the version 11 installed well g 11 g (64-bit) with the help of the jdk version 1.7 (actually it is the wrong thing I have done, we should always use the version lower than 1.7)

  But strangely installation allowed me to install odi 11g with version 1.7 of jdk.

  Now when I start odi 11g, it says as a message "you are using 1.7, you must use ECCAS 1.6 these version..."

  so to fix this issue, the forums have explored, found that we can change the jdk path in appdata\roaming\1.0.0.1\odi\product.conf

  I installed Javea JDK 1.6.27 again in the separate path and the same update in this product.conf...

  When I restart odi11g of what it still shows this msg you are using JDK version 1.7 o...

  Can u pls tell any missing step here?

  Concerning

  ASP.

  Fixed my self! Grand...

  do not change the product.conf instead to change the JDK path in below url

  file oracledi\client\odi\bin\odi.conf

  That's all... There is no more pop up warning message

• Help.My HP8660 all-in-one does not work correctly.

  When I use color scanning and copying, the book came out with a lot of vertical colored lines. But it works fine if I copy in black and grayscale scanning.

  

  Hello

  Try to connect the printer directly to a wall outlet, remove any strips, surge protectors, extensions, etc...

  This is likely to happen due to power problems.

  If this does not help, try following these steps:

  http://support.HP.com/us-en/document/c04422559/

  Shlomi

• After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

  Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

  which means that I am unable to download XP 3 service pack or IE8.

  Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

  Edit: Link fixed.

• When windows starts, the user name is not displayed, almost all programs do not work, or I get a message saying that they do not have authorization to run the service

  When windows starts the user name is not displayed, almost all programs do not work, or I get a message saying that they have permission to run the service, sometimes windows not loading some programs of initialization and I can't turn off the pc by using the start menu, when it arrives, sometimes everything works normally when I turn on the pc except of my antivirus (avast!) and firewall (comodo) , they are responsible, but avast! said that the service is disabled and when I him there is a message saying that he had ceased to maximize or in an inconsistent state and comodo said that the application of the agent is not running.

  My Windows is XP Professional SP3.

  Thanks in advance.
  (Sorry for my English)

  * original title - I have starting problems I've ever had and I can't find a TomTom.*

  Salvation exodus REV,

  You did it of any material changes or software on the computer before this problem?

  I recommend you to uninstall Avast! & Comodo temporarily from Add / Remove Programs. Later, check to see if the problem persists.

  To uninstall Avast!, you can use utility aswClear to uninstall Avast!.

  For more information, refer to this link: Uninstall Utility

  You can not install Comodo since Avast! has a built-in & antivirus firewall.

  Hope the helps of information.
  Please post back and we do know.

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you