allocate memory and call the dll function that writes to the pointer

Similar Questions

• How to call a DLL function that has need of an array initialized structures which can be written in by the DLL?

  I need to call the following function in a C DLL:

  __declspec (dllexport) int MSIL_EnumSpectrometers (SPECTROMETER_ID * spectrometers);

  where the only parameter is a pointer to:

  typedef struct
  {
  tank model [32];
  series char [32];
  Channel int;
  } SPECTROMETER_ID;

  Before LabVIEW 2011 I would use a CIN allocate the memory and call the function, but in LabVIEW 2011, the INC has been deleted and I have to use a library function node call instead. When I go to set the parameter, it seems that I need to set the type to "Adapt to the Type" and data for 'Pointer to data in table' Format, then pass an initialized array of SPECTROMETER_ID with the many elements he so the DLL can fill the table with data. (See the attached picture.) When I do that, however, it blocks LabVIEW desktop.  I guess it is because the DLL is corrupting the memory space of LabVIEW, but I don't see why, because I'm basically passing in a void pointer to an array initialized in the right size. Note that the first node of NSI returns the number of elements required in the table.  Anyone have any idea what I'm doing wrong here?

  In LabVIEW, when a table is in a cluster - cluster don't detain actually table but sort of a pointer that points to the table. If you need the cluster to contain 32 to 32 Add to the cluster. See the VI attached to how it's supposed to be done.

• Pop - up saying that I am low on memory and close the files. How to check my memory or more or delete files that take memory?

  Original title: HOW TO CHECK FOR an INSUFFICIENT MEMORY

  I have a Toshiba laptop (110 GB Vista, Windows 7), but I don't know how to check the memory and get a pop up saying that I am low on memory and close the files... How to check my memory or more or delete files that take memory? Thank you

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Fact the occurs when you only access Internet Explorer?

  ·         You have dual boot on the computer operating system? If yes the issue is limited to Windows vista?

  Low memory message may appear if the system hard drive is full, or running out of memory. I suggest you follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  You can also optimize Windows vista for better performance. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Two parallel executions, calling a DLL function

  Hello

  Since this test takes about 6 hours to test my USE, I plan to use the parallel model to test 2 UUT at the same time in parallel.

  I implement the test code as a DLL of CVI.

  However, to my surprise, it seems that the steps that call a DLL function actually traveled in one series, not in parallel:

  Test 2 power outlets if one enters and executes a DLL works, the other waits for the first to complete its operation and return. While the other runs on the same copy of the DLL, so that the DLL global variables are actually shared between executions.

  So if a DLL will take 5 minutes to complete, two executions in the running at the same time take 10 minutes. This isn't a running in parallel in every way.

  What I want and expect also TestStand, was to completely isolate the copies of these two executions DLL such as test two casings could run at the same time the same DLL function by arbitrary executiong their copy of the function, completely isolated from one another.

  So they separated globals, discussions, etc., and two parallel jacks take 5 minutes to run a step, instead of 10.

  Such a scenario is possible?

  If not, how can I use my test in parallel (in truly parallel) when the use of 2-socket test?

  (1) Yes, he'll call the multiple executions in TestStand calling into the same dll in memory the same copy of this DLL. Thus dll called in this way must be thread-safe (that is written in a way that is safe for multiple threads running the code at the same time). This means usually avoiding the use of global variables among other things. Instead, you can store the thread shows in local variables within your sequence and pass it in the dll as a parameter as needed. Keep in mind all the DLLs your dll calls must also be thread-safe or you need to synchronize calls in other DLLs with locks or other synchronization primitives.

  1 (b) even if your dll are not thread-safe, you might still be able to get some benefits from parallel execution using the type of automatic planning step and split your sequence in independent sections, which can be performed in an order any. What it will do is allow you to run Test a socket A and B Test to another socket in parallel, and then once they are then perhaps test B will take place on one and test one run on the other. In this way, as long as each test is independent of the other you can safely run them in parallel at the same time even if it is not possible to run the same test in parallel at the same time (that is, if you can not run test on two Sockets at the same time, you might still be able to get an advantage of parallelism by running the Test B in one take during the tests in the other. See the online help for the type of step in autoscheduling for more details).

  (2) taken executions (and all executions of TestStand really) are threads separated within the same process. Since they are in the same process, the global variables in the dll are essentially shared between them. TestStand Station globals are also shared between them. TestStand Globals file, however, are not shared between runs (each run gets its own copy) unless you enable the setting in the movie file properties dialog box.

  (3) course, using index as a way to distinguish data access are perfectly valid. Just be careful that what each thread does not affect data that other threads have access. For example, if you have a global network with 2 elements, one for each grip test, you can use safely the decision-making of index in the table and in this way are not sharing data between threads even if you use a global variable, but the table should be made from the outset before start running threads , or it must be synchronized in some way, otherwise it is possible to have a thread tries to access the data, while the other thread is created. Basically, you need to make sure that if you use global data which the creation/deletion, modification and access in a thread does not affect the global data that the other thread use anyway in or we must protect these creation/deletion, modification and access to global data with locks, mutex or critical sections.

  Hope this helps,

  -Doug

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• error 1097 after the call dll function that allocates memory inside

  Hello!

  When a one call my duties in my dll of LabView, I get an error 1097. My function takes a few arguments, and then allocates memory for the measure.

  He doesn't have pointers to this memory area, it's just allocates this memory for himself. I don't know what could be the problem, no doubt, I'm missing something.

  Could you please help?

  Best regards

  Tamas

  
  

• Video button grayed out and call quality info says that there are too many people in the Group call

  I recently downloaded the latest version of Skype and all of a sudden I can't make video calls to group because there is too much can people in the group, but when im chat only to one person still does not work. He said I can video call a maximum of 10 people, when I have 7 people on the group...

  any help on this?

  

  It is a known problem with the latest version of Skype 7.0.

  http://community.Skype.com/T5/Windows-desktop-client/why-can-t-you-turn-on-video-chat-anymore-in-big...

  Uninstall version 7.0 and install the 6.21.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• Speed of memory after adding memory and upgrading the video card problem.

  My XPS 410 ships in September 2007 with a Core 2 Quad (Q6600) 2.4 ghz processor and two gigs of 800 mhz DDR2 SDRAM. Recently, I added two concerts more than 800 mhz DDR2 SDRAM and replaced my GeForce 8600 GTS with a GeForce 9500 GT with 1 GB of video memory. When I started the system, all four gigabytes of memory have been recognized, but was only running at 667 mhz. Can I fix this? This means that the original memory, or the new memory is really 667 mhz DDR2 SDRAM and not the 800 mhz DDR2 SDRAM I paid for? There are other possible reasons for this?

  Hi RuralDigital,

  I will need some additional information to help you best.

  Ø you have 32 bit or 64 bit Vista?

  O do you have 667 MHz RAM in your computer?

  When you use one more memory RAM clocked with one less clocked the two Rams, RAM will run at a lower speed RAM, that means that when you install a DDR2 667 MHz and DDR2 800 MHz clock speed, maximum RAM memory will be lower among the 2 cylinders speed, i.e., 667 Mhz.

  Then I suggest you to check if the speed of the Rams is the same.

  You can also check out the link below.

  http://msdn.Microsoft.com/en-us/library/aa366778 (VS.85) .aspx #physical_memory_limits_windows_vista

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• How check installed RAM memory and check the amount of memory RAM is consumed

  Original title: RAM used

  Is there a way I can check not just the RAM installed but used the rest of the memory used please what are the steps on the computer?

  Thank you

  Hello

  If I understand correctly you want to know how to check how much RAM is installed on your computer, as well as the way you want to check the amount of RAM memory is consumed by the computer. I will certainly help you with information.

  To check the amount of RAM installed, I suggest you follow the steps:

  • Click Start.
  • Right-click on computer and select Properties.
  • In the window system, under System properties, see installed memory (RAM) to the memory installed on your computer.

  To check the memory consumed by each program you can check by following the steps below:

  1. Open the Task Manager.
  2. On the performance tab, click on Resource Monitor.
  3. Under the resource monitor , you should be able to see the memory consumed by each program.

  

  To check the memory usage, see at the bottom of the Task Manager in the status bar where it says physical memory: xx %

  Hope the above information helps. Please keep us updated with the status of the issue to help you further.

• Insert SMS and call the newspapers by program

  I want to insert the SMS and call programmatically logs.

  I finished the memos using this class 'BlackBerryMemo' &

  BlackBerryMemoList mlist = pim.openPIMList (BlackBerryMemoList) (BlackBerryPIM.MEMO_LIST, PIM. READ_WRITE);

  But how to do the same for the SMS & call logs insert programmatically.

  Can someone please help me to do so.

  There is no access to the sms.
  call logs can be added by using http://www.blackberry.com/developers/docs/7.1.0api/net/rim/blackberry/api/phone/phonelogs/PhoneLogs...

  are you sure you even not looked at the API?

• How can I rename the rootitem point in the project first and move the point in a locker in actionscript

  I use this code in my button:

  var prj:Project = Premiere.app.project;
  var arr:Array = new Array();
  arr [0] = "c:\abc.mp4".
  prj.importFiles (arr);

  First project adds an element named "abc.mp4" but I want to display this element with name as 'somethingiwant.mp4 '.

  and then I create bin by:

  prj.rootItem.createBin ("tempbin");

  I want to move the clip in this sandbox.

  
  I can't do these, help me please!

  First of all: the current version of body (8.1, or 'Body CC 2014.') is the last that will support Flex-based panels. I recommend you switch to HTML5-based panels, as soon as possible.

  Second: rather than move the element of film in the tray AFTER importation, you can create and target the new tray PRIOR to importation.

  [Sample code is ExtendScript]

  var newBin = app.project.rootItem.createBin ("Bin for your stuff");

  newBin.select (); new target for the following import bin

  importFiles (...); import files, as before

• Pavilion HPE h9-1215: increase the maximum memory AND replace the video card by one who has at least a Display Port

  I want to increase up to 32 GB of system RAM.  This will require Windows 10? I currently have Windows 7 Home Premium.

  This Kingston RAM will work:

  Size of memory 8 GB

  Memory DDR3 SDRAM technology

  1600 MHz memory speed

  Standard DDR3-1600/PC3-12800 memory

  ECC error checking

  The recorded signal processing

  Also, I want to be able to run 2-28 "monitors UHD or almost full resolution.  What graphics card would recommend someone? I understand that the card must have at least a DisplayPort.

  HP initially, as an option, the GeForce 680 GPU GTX. So I guess it should work.

  My system has the processor i7-3770 @ 3.4 GHz

  Thanks for help with any known RAM/cards that work on this system. And extra thanks for suggestions on the question if I need to upgrade to Windows 10 do all work as well as all changes to the Bios can do.

  Big_Dave,

  I want to thank you for all your help and suggestions.  I already bought Windows 7 Pro.

  I've set up CPU - Z.

  I will contact HP sales for upgrades of memory for my system.

  I went to the site of Kingston memory tools.  He suggested that using 4 GB modules since it is probably set up for a maximum of 16 GB with Windows 7 Home Premium.  I need to work on that.

  And what a great suggestion on the graphics card.  It has 2 DisplayPorts!

  You are the best.

  Thanks and I'll let you know how it works.

  Gary

• I have a dell Inspiron 1545 with a capacity of 4G memory, and I remember reading somewhere that I could move to 6, even though dell says no.

  I bought this computer in 2009 and have no other problems with it, only that it slows due to the memory... Please somone tell me what memory module, I could buy to fix this

  There are 2 slots in this laptop, if I could buy a 4 g memory module (which would give me 6), I think that I would be good, but I don't know which one to buy that would fit. Thanks for listening

  Adele

  Your motherboard (and mine) will not work with 4 x 2 and that he wouldn't do it a faster, or better.  Is this not what dell has said, and I confirmed. ???

• In cascade LOV and calling a javascript function thro dynamic action

  We have a page where there are lovs cascaded to the country / state. The selection of State list is cascaded with country LOV. We also request a javascript to normalize the child lov (State), so that if there is no value in the list, the lov will be disabled and if there is only one value for show, which will be set as default (enabled). However, it seems apex runs javascript code standardize everything first and then generates the list for the lov State, then the State lov is always disabled.
  
  I created a page similar to apex.oracle.com with choice of Department lists and employee. The link to the page is http://apex.oracle.com/pls/apex/f?p=40631:2
  
  In this page, the employee selection list is cascaded to the Department. (1) to any value other then 'IT' or no selection value in the list of DEPARTMENTS, the list of employees must be enabled and should list all the names of appropriate employees. (2) for the selection of the 'IT', it should be disabled with the default selection as "no data found". However it does not for 1). Could someone find the problem and give a possible solution.
  
  Javascript code executed (that thro NatStandardizeLOV1('P2_EMPLOYEE') dynamic action for Department change is lower.
  
  < code >
  function NatStandardizeLOV1 (pitem)
  {
  var obj = document.getElementById (pitem);
  obj. Disabled = false;
  obj.options [0]. Text = "SΘlectionner one..";
  
  
  If (obj.type is "select one")
  {
  
  If (obj.length == 1 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  {
  obj.options [0]. Text = "No. Data."
  obj.disabled = true;
  }
  If (obj.length == 2 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  obj.options [1]. Selected = true;
  }
  }
  
  
  < code >
  
  Thank you in advance,
  
  Natarajan
  
  Published by: Nikita on May 27, 2011 04:21

  Natarajan,

  The question is one of the time. You're service is running before the Ajax request (triggered by the LOV cascading) brings back the items. So change the 'when' of dynamic Action so that it fires the event "After Refresh" of the question of the Department rather than the event change.

  Kind regards
  Dan

  blog: http://danielmcghan.us/
  work: http://SkillBuilders.com/APEX/